• Structural Engineering and Mechanics
• /
• v.2 no.1
• /
• pp.1-16
• /
• 1994

A unified theory has recently been developed for reinforced concrete structures (Hsu 1993), subjected to the four basic actions - bending, axial load, shear and torsion. The theory has five components, namely, the struts-and-ties model, the equilibrium (or plasticity) truss model, the Bernoulli compatibility truss model, the Mohr compatibility truss model and the softened truss model. Because the last three models can satisfy the stress equilibrium, the strain compatibility and the constitutive laws of materials, they can predict not only the strength, but also the load-deformation history of a member. In this paper the five models are summarized to illustrate their intrinsic consistency.

• Ocean Systems Engineering
• /
• v.2 no.1
• /
• pp.1-16
• /
• 2012

Offshore wind turbines are complex structural and mechanical systems located in a highly demanding environment. This paper proposes a multi-level system approach for studying the structural behavior of the support structure of an offshore wind turbine. In accordance with this approach, a proper numerical modeling requires the adoption of a suitable technique in order to organize the qualitative and quantitative assessment in various sub-problems, which can be solved by means of sub-models at different levels of detail, both for the structural behavior and for the simulation of loads. Consequently, in a first place, the effects on the structural response induced by the uncertainty of the parameters used to describe the environmental actions and the finite element model of the structure are inquired. After that, a meso-level FEM model of the blade is adopted in order to obtain the detailed load stress on the blade/hub connection.

• Computers and Concrete
• /
• v.8 no.1
• /
• pp.59-70
• /
• 2011

A theoretical model known as the modified rotating-angle softened-truss model (MRA-STM), which is a modification of Rotating-Angle Softened-Truss Model and Modified Compression Field Theory, is presented for the analysis of reinforced concrete membranes in shear. As an application, shear strength and behaviour of reinforced concrete exterior beam-column joints are analysed using the MRA-STM combining with the deep beam analogy. The joints are considered as RC panels and subjected to vertical and horizontal shear stresses from adjacent columns and beams. The strut and truss actions in a beam-column joint are represented by the effective transverse compression stresses and a softened concrete truss in the proposed model. The theoretical predictions of shear strength of reinforced concrete exterior beam-column joints from the proposed model show good agreement with the experimental results.

• International Journal of High-Rise Buildings
• /
• v.5 no.3
• /
• pp.221-232
• /
• 2016

With the booming of construction and property industries in China, the demand for high-rises and mega-scale buildings with more integrated building functions, open- and tailor-shaped outlooks, better connections to municipal infrastructures, and higher grades of building importance has been increasing in the past two decades. The seismic design and engineering of such modern mega-buildings face engineering challenges such as hazard mitigation of extreme actions and surroundings, integrated structural frameworks and building skins, complex connections, and overall construction efficiency. It is the work of a new generation of civil and structural engineers to enhance engineering efficiency and achieve overall engineering, environmental, and economical effectiveness for these high-rise projects. This paper elaborates the above topics through case studies on the design and construction of four such developments in China. Some rethinking is conducted on evolution in modern seismic engineering and design through innovation to achieve an acceptable level of overall sustainability and building effectiveness.

• The Korean Journal of Ecology
• /
• v.20 no.3
• /
• pp.201-216
• /
• 1997

Forest managers are increasingly being challenged to produce goods and services to society while managing for ecosystem sustainability. Forest ecosystem management is an emerging philosophy to achieve these objectives. We synthesized some basic concepts of forest ecosystem, sustainability in forests and forest ecosystem management, and described the importances of long-term ecological studies. Also we presented few relatively simple principles of forest ecosystem management, strategies, and case studies for integrating forest ecosystem management principles into the forest management planning process. It was emphasizd that in forest ecosystem management process, society, land managers, forest managers, and scientists be entered into a partnership to reshape management goals, redefine objectives, and redirect management actions in response to changing socioeconomic information and evolving bioogical, physical, chemical, and environmental conditions. Agreement or disagreement with our synthesis and opinions on forest ecosystem management is out of the primary objective of this paper, which is to stimulate new and creative approaches to forest ecosystem management as an emerging issue in forestry.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.215-223
• /
• 2010

The excessive use of fossil fuel since the industrial revolution increased the level of $CO_2$(the main cause of global warming also known as the greenhouse gas) and lead by the first world countries actions toward decreasing the greenhouse gas are taking place world wide. Naturally finding and using new environment friendly energy in design is on the increase. Thus as one solution to these problems the following thesis suggests a public toilet with solar energy technology applied.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.33-38
• /
• 1997

The reuse of waste concrete amy settle the problems of environmental pollution and critical shortage of good natural aggregate. But recycled aggregate particles consist of substantial amount of relatively soft cement paste component. These aggregates are more porous, and les resistant to mechanical actions than natural aggregate. And the source of supply for manufacturing recycled aggregate is generally composed of different types of original aggregate and strengths of original mortar. The properties of recycled aggregate exhibit a considerable variation due to the properties of original concrete. This paper is an experimental study on the fundamental properties of recycled aggregates sampled from processing plant in the suburbs of TaeJeon.

• The Korean Journal of Ecology
• /
• v.1 no.2
• /
• pp.49-56
• /
• 1977

For the culture the population growth, shell length and spawning seasons of Gomphina veneriformis, and its environmental factors, were investigated at the Jeju coastal regions. from Feburuary, 1975 to March, 1976. The soil movements of the tidal flats where the clams inhabited were relatively rapid during the strong tidal actions. The rate of population growth were rapid from April to September, then became obsure. The relative growth equations of the shell height (SH) and the shell breadth (SB) against the shell length (SL) of the clams were as follows: Changhung : SH=0.751 SL + 0.685, SB=0.448 SL-0.630 Pyoson : SH-0.775 SL - 0.115, SB=0.464 SL-1.008 Hwhason : SH=0.794 SL - 0.923, SB=0.485 SL-1.155 Kwhagzee : SH=0.771 SL - 0.644, SB=0.455 SL-1.049 The meat weight increases of the clams were continued from March to late June, then it decreased sharply up to late August. The spawning of the clams seems to be late from June to Spetember in the regions studied.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1010-1015
• /
• 2008

The rapid wear rate of cutting tools due to high cutting temperature is a critical problem to be solved in machining of hardened steel. Application of cutting fluid influences the performance of machining because of its lubrication and cooling actions. But, the environmental concerns call for the reduced use of cutting fluids in machining operations. Near-dry machining such as minimum quantity lubrication is regarded as one of the solutions to this difficulty. In the present work, cutting fluid was applied as a high velocity jet at the machining zone continuously at an extreme low rate using a fluid application system developed namely Electro Static Lubrication (ESL) during drilling of hardened steel. The performance of ESL has been compared with that of dry and MQL (minimum quantity lubrication) machining.

• Journal of Global Scholars of Marketing Science
• /
• v.3
• /
• pp.235-251
• /
• 1999

This research deals with the basic ideas and implementation used for developing competitive advantage in the market they serve. The market to which a company belongs is continuously evolving, not static. Therefore, the company is required to adopt a suitable strategy in the market it serves. Marketing strategy establishment requires continual adjustment in the strategy content and redirection in organizational actions to address emerging market problems and opportunities. Much of the strategic implementation is characterized by firefights aimed at solving emerging, unforeseen problems. The concept of strategy was originally introduced to provide companies with a rational means of coping with environmental changes. An old Oriental proverb said that "knowing myself and then understanding others is the best way to success". In line with the proverb, the starting point of marketing strategy establishment for the competitive advantage is to understand the activities of a company wholly. After analyzing the scope of its activities, a company has to understand the market structure, to review competitive environments, to formulate the base of the competitive strategy and to adopt differentiation strategies for obtaining the competitive advantage.