• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.37-43
• /
• 2008

Inorganic injection material, which is one of the ground improvement materials, consists of cement accelerator and inorganic micro particle. The inorganic injection material is known to overcome the major limitations of water glass type improvement materials, which are leaching and accompanying strength loss. The inorganic injection material is superior in durability and strength, and environmentally friendly since leaching is prevented. In this study, the effectiveness and environment-friendliness of the MIS(Micro Injection-process System) using the inorganic injection material is compared to SGR, which uses the water glass. The performed tests were unconfined compression test, chemical resistance test, and fish poison test. The unconfined compression tests showed that the MIS results in 1.7 times higher 28 day strength compared to the SGR. In addition, the strength continually increased with time for the MIS, while it decreased for the SGR. The chemical resistance tests indicated that the rate of change in length using the MIS is 10~25 times smaller than when using the SGR. The fish poison test proved that MIS was more environmentally friendly. The analysis of chemical ingredients of leached showed that the amount of $Cr^{6+}$, Pb and Si leached from the MIS is less compared to the SGR. Accordingly, the MIS grout is more high-strength than existing SGR grout. It is excellent in shortening of construction period, structural stability of foundation and environmentally friendly. So, it is considered that it has not little the problem about groundwater pollution.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.89-114
• /
• 2012

For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.

• The Journal of the Korea Contents Association
• /
• v.22 no.3
• /
• pp.296-308
• /
• 2022

In the COVID-19 crisis, the elderly over 60 have various psychological health problems such as depression, anxiety, and fear, and the community has become the only space for senior activities. To this end, this study presented a therapeutic aging-friendly community environmental design evaluation system using theoretical review, FGI interview, and hierarchical analysis AHP. The evaluation system is a three-dimensional space, with 10 upper layers and 68 lower layers. In addition, the weight of each index of the evaluation system was distributed through expert survey and SPSS program analysis. First, the material space environment design must satisfy the comfort and health of the elderly when they are active in a common space for their daily life. Second, the design of social space environment is designed to promote exchange and social connection among the elderly. Third, the operating space environment design considers the operating system of the community operating company as important. Through this, it is expected to improve the psychological health of the elderly by providing systematic technical basis and action guidelines for the development of the residential environment of the elderly.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.533-544
• /
• 2015

Unlike the concrete structure built on land, that exposed to the marine environment is greatly degraded in durability due to the exposure to not only the physical action caused by sea wind, tide, and wave, but also the harsh conditions, including the chemical erosion and freeze-thaw which result from $SO_4{^{2-}}$, $Cl^-$ and $Mg^{2+}$ ions in seawater. In the process of the large scaled construction of submerged concrete structures, of course environmental hazardous substance, such as alkaline (pH) and heavy metals, may be leached. Thus, this issue needs to be adequately reviewed and studied. Therefore, this study attempted to develop a CSA (Calcium Sulfo Aluminate) activator using electric arc furnace reducing slags, as well as the eco-friendly concrete for artificial reefs using electric arc furnace oxidizing slag as aggregate for concrete. The strength properties of the eco-friendly concrete exposed to the marine environment were lower than those of the normal concrete by curing 28 days. This suggest that additional studies are needed to improve the early strength of the eco-friendly concrete. With respect to seawater resistance of the eco-friendly concrete, the average strength loss against 1 year of curing days reached 8-9%. the eco-friendly concrete using high volume of ground granulated blast furnace slags and high specific gravity of electronic arc furnace oxidizing slag demonstrated the sufficient usability as a freeze-thaw resistant material. With respect to heavy metal leaching properties of the eco-friendly concrete, heavy metal substances were immobilized by chemical bonding in the curing process through the hydration of concrete. Thus, heavy metal substances were neither identified at or below environmental hazard criteria nor detected, suggesting that the eco-friendly concrete is safe in terms of leaching of hazardous substances.

• Korean journal of applied entomology
• /
• v.46 no.1 s.145
• /
• pp.87-95
• /
• 2007

Many kinds of environment friendly agricultural materials were used for the insect pest control and the control of plant diseases, furthermore they support the growth of crops in the greenhouses and the kindly environment friendly farming. Phytoseiulus persimilis might be used for control of two-spotted mites with environment friendly agricultural materials at the same time. For testing the toxicity of environment friendly agricultural materials against to p. persimilis, 61 environment friendly agricultural materials were selected by material contents and using methods. When environment friendly agricultural materials were directly sprayed on P. persimilis, IEFAM C, FEFAM A, EFAMSM A, D, EFAMPE A, EFAMCh B, EFAMME A, and EFAMMo C killed over 90%. However, there was no effects to FEFAM C, D, EFAMSM C, EFAML A, EFAMME C, E, H, J, EFAMMo G and I against P. persimilis. P. persimilis adults were not survived in vial for 48 hours after sprayed and dried with the environment friendly agricultural materials, fer examples, EFAMSM I, EFAMME A, EFAMMo A, C, and I. Otherwise, EFAMCh C and EFAMMo B were no effects to P. persimilis. Some environment friendly agricultural materials are of different qualities, and consequently test of their foxily have to necessary.

• Journal of the Korean Institute of Rural Architecture
• /
• v.4 no.1
• /
• pp.99-116
• /
• 2002

This study is based on the Ecological Design Theories related with the Village and Architectural planning. The purpose of this study is to propose the Rural Village Design Method in consideration of Ecological Environment. To achieve this purpose, Normative Theory Study which means Logical Analysis of Ecological Theories in the new field of Ecological Village and Architecture Design, is done in accordance with the object of this study. This results derived of this study are as follows: 1. Six(6)-Environmentally Friendly Rural Village Planning Elements related with the purpose of this study, are clarified these are Land-use planning, Transfortation planning, Plants and Water, Living-thing Ecological System planning, Energy and resource planning, Village Culture and amenity planning, and Architectural Material planning. 2. Rural Village Design Method in consideration of Ecological Environment is porposed by means of the Normative theroy study analysis and contents analysis related with Ecological Village and Architecture planning which contain Ecological Planning Elements, and case study.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.4
• /
• pp.174-177
• /
• 2010

We have developed an environment-friendly etching process, an alternative to the dichromic acid etching process, as a pretreatment of acrylonitrile-butadiene-styrene (ABS) plastic for electroless plating. In order to plate ABS plastic in an electroless way, there should be fine holes on the surface of the ABS plastic to enhance mechanically the adhesion strength between the plastic surface and the plate. To make these holes, the surface was coated uniformly with dispersed chemical foaming agents in a mixture of environmentally friendly dispersant and solvent by the methods of dipping or direct application. The solvent seeps into just below the surface and distributes the chemical foaming agents uniformly beneath the surface. After drying off the surface, the surface was heated at a temperature well below the glass transition temperature of ABS plastic. By pyrolysis, the chemical foaming agents made fine holes on the surface. In order to discover optimum conditions for the formation of fine holes, the mixing ratio of the solvent, the dispersant and the chemical foaming agent were controlled. After the etching process, the surface was plated with nickel. We tested the adhesion strength between the ABS plastic and nickel plate by the cross-cutting method. The surface morphologies of the ABS plastic before and after the etching process were observed by means of a scanning electron microscope.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.2
• /
• pp.35-44
• /
• 2014

Modern society is filled with the pursuit of material wealth and great convenience due to high technology that has been introduced to all facets of society. There is no exception to this in the field of construction. Modern construction, however, has caused environmental destruction and pollution, disturbing the coexistence of humans and nature. Therefore, this thesis aims to explore how humans and nature can maintain a mutually beneficial relationship by looking into the construction of Jeju's traditional dwelling house. This thesis examines the geographical features of Jeju and looks into how Jeju people have adapted themselves to nature. It is assumed that geographical features have created Jeju's unique environment and style of architecture and differentiated Jeju's traditional houses from those of other regions. Also, it is considered that geographical features had a large impact on traditional construction such as the floor plan and the layout of buildings. Accordingly, this thesis explores the way traditional houses protected house dwellers from the natural environment and examines the wisdom of our ancestors who took advantage of the natural environment. In addition, this thesis aims to contribute to creating Jeju's unique construction culture and environment by studying materials, structures, and forms that were applied to the traditional houses of Jeju.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.29-36
• /
• 2008

The shotcrete is a NATM technique as a major tunnel support for ground stability after tunnel excavation. Instead of a general concrete lining method, it is a trend for curtail of construction periods and reduction of construction expenses that required to use of the permanent shotcrete lining. This high-strength shotcrete is required to use as a permanent shotcrete lining. This brought out the solution of environmental pollution and harmfulness to human. Accordingly, in this study specimens for strength measurement were made to develop shotcrete possible to develop materials in early with cement mineral accelerator as NATM method construction. It was compared with existing shotcrete material, unconfined compression test, flexural strength test, antiwashout underwater test were experimented. The fish poison test was experimented to evaluate an influence of environment. As a results of the test, unconfined compressive strength and flexural strength were equivalent with 28-curing day strength of existing material. An antiwashout of research subject material was revealed excellently in antiwashout Underwater test. As a results of the fish poison, an evaluation research subject material was founded more environmentally friendly than existing shotcrete.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1522-1530
• /
• 2014

High-rise residential complex type is getting important as new town development and urban regeneration in the downtown area. However, literature review of high-rise residential complex and research on satisfaction analysis of real residents are lack. Therefore, this paper is analyzing environmental friendly planning elements of high-rise building as housing subdivision, inside of building, facility, and maintenance by a survey on experts. The purpose of this paper is to suggest improvement method of environmental-friendly planning elements of high-rise residential complex by M-IPA. First, as a result, the part of housing subdivision has to keep complex land utilization, environmental-friendly transportation. Second, the part of inside of building shows that ecological housing subdivision, indoor air environment urgent and indoor temperature environment keeps maintaining. Finally, the part of facility/maintenance shows that material and facility, and index of energy management are urgently needed.