• Asian Journal of Atmospheric Environment
• /
• v.5 no.2
• /
• pp.86-96
• /
• 2011

The positive matrix factorization (PMF2) and multilinear engine (ME2) models have been shown to be powerful environmental analysis techniques and have been successfully applied to the assessment of ambient particulate matter (PM) source contributions. Because these models are difficult to apply practically, the US EPA developed a more user-friendly version of the PMF. The initial version of the EPA PMF model does not provide any rotational capabilities; for this reason, the model was upgraded to include rotational functions in the EPA PMF ver. 2.0. In this study, PMF and EPA PMF modeling identified ten particulate matter sources including secondary sulfate I, vehicle gasoline, secondary sulfate II, secondary nitrate, secondary sulfate III, incinerators, aged sea salt, airborne soil particles, oil combustion, and diesel emissions. All of the source profiles determined by the two models showed excellent agreement. The calculated average concentrations of $PM_{2.5}$ were consistent between the PMF2 and EPA PMF ($17.94{\pm}0.30{\mu}g/m^3$ and $17.94{\pm}0.30\;{\mu}g/m^3$, respectively). Also, each set of estimated source contributions of the PMF2 and EPA PMF showed good agreement. The results from the new EPA PMF version applying rotational functions were consistent with those of PMF2. Therefore, the updated version of EPA PMF with rotational capabilities will provide more reasonable solutions compared with those of PMF2 and can be more widely applied to air quality management.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.7
• /
• pp.3-14
• /
• 2006

The objective of this study was to develop a GIS-based decision support system (GIS-USLE system) to estimate soil erosion and evaluate its effect on concentrated upland plots in Godang district, Korea. This system was developed for the ArcView environment using A VENUE script. Three modules were used in the GIS-USLE system, namely pre-processing, the USLE factors calculator module, and post-processing. This system benefits from a user friendly environment that allows users with limited computer knowledge to use it. This system was applied to 1,285 individual upland plots ranging from 0.005 to 1.347 ha in size with an average slope steepness of 14 %. The rainfall distributions were estimated using the three methods, namely Mononobe and Yen-Chow with Triangle and with Trapezoid type, and then used to calculate the rainfall erosivity factor. The soil erosion amounts from the 1,285 individual plots in the study area by 2 year return period with a 24h maximum rainfall amount of 154.6 mm were estimated at 5 tons/ha on average. Slope appeared to be the most important factor affecting soil erosion estimation, as expected. The prototype model was applied to the project area, and the results appeared to support the practical applications. By examining many fields simultaneously, this system can easily provide fast estimation of soil erosion and thus reveal the spatial pattern of erosion from fields in a region. This study will help estimate and evaluate soil erosion in concentrated upland districts and identify the best management practices.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.876-887
• /
• 2006

Recently, there have been a large number of remodeling (or renovation) works in old buildings in urban areas. Compared to new buildings, environmental risk might be more significant in such buildings where remodeling works are going on, since some parts of the building may still be in service for people. This study was carried out to investigate the impacts of remodeling works on the indoor air quality (IAQ) of a large building (a 22 stories university library). Indoor air monitoring was conducted during and after the remodeling works every two weeks for a one year period, and target compounds included BTEX, styrene, TVOC, carbonyl compounds such as formaldehyde and acetaldehyde. $CO,\;CO_2,\;PM_{10}$, and $PM_{2.5}$. Overall, the IAQ appeared to be recovered within two months after the remodeling works. However, in some places, concentrations of formaldehyde, toluene, xylene. and ethylbenzene showed higher levels even after works than those during the works. The results indicate that painting, glues and office furnitures are major sources of aromatic VOCs and formaldehyde. Therefore, in order to decrease the concentrations of toxic VOCs, the use of environmental-friendly building materials is strongly recommended during the remodeling works. In addition, IAQ control and management scheme (for example, baking the inside of the building) should be taken into consideration before reopening the buildings.

• Korean Journal of Environment and Ecology
• /
• v.22 no.2
• /
• pp.145-151
• /
• 2008

The purpose of this study was to understand users' attitudes for trail structure conditions in Dobong district, Bukhansan National Park, Korea. For this purpose, the research conducted a respondent's-personal entry-method based questionnaire survey on 250 visitors using inquiry routes in Dobong areas in Bukhansan National Park in July, 2007. The survey result showed that the 6 types of pedestrian trail structures were relatively in better shape in its quality and quantity while the responses for 3 types of structures, such as wood deck, wood railings, and stone paving, were positive in terms of harmony with landscape, preservation of resources, and user convenience. In conclusion, it is considered to be essential to bring in nature-friendly materials for walking facilities in National Parks and also necessary to consider the visual effect arising from the harmony with landscape together with the functions of conservation of resources and inquiry convenience.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.6 no.2
• /
• pp.39-46
• /
• 2023

Purpose: The small-scale environmental impact assessment system in Korea was introduced and implemented in August 2000, but it has a problem that it cannot guarantee implementation due to the large proportion of qualitative reduction measures for each evaluation item. Therefore, when preparing a small-scale environmental impact assessment, research was conducted on how to improve the existing simple listing-type reduction measures and qualitative evaluation standards to quantitative reduction measures and evaluation standards reflecting regional characteristics. Research design, data and methodology: The small-scale environmental impact assessment system in Korea was introduced and implemented in August 2000, but it has a problem that it cannot guarantee implementation due to the large proportion of qualitative reduction measures for each evaluation item. Therefore, when preparing a small-scale environmental impact assessment, research was conducted on how to improve the existing simple listing-type reduction measures and qualitative evaluation standards to quantitative reduction measures and evaluation standards reflecting regional characteristics. Results: As a result of the analysis of qualitative and quantitative factors, the arithmetic sum of the qualitative factors of the total six projects is 160, accounting for 80% of the total number of reduction measures, and the quantitative factors are 40, accounting for 20%. Among them, the number of qualitative reduction measures reached 97.4% for animal and plant items, and more than 90% for air quality, noise and vibration, and eco-friendly resource circulation items. Conclusions: Therefore, it is necessary to avoid establishing qualitative reduction measures and set quantitative measures as the basis, but to specify the specifications, size, and installation location related to the reduction measures, and to calculate the numerical reduction efficiency.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.2
• /
• pp.114-122
• /
• 2024

NF₃, Chamber cleaning gas, has a high Global Warming Potential (GWP) of 17,000, causing significant greenhouse effects. Reducing gas usage during the cleaning process is crucial while increasing the cleaning Rate and reducing cleaning standard deviation (Stdev). In a previous study with a 6-inch PECVD chamber, a multiple linear regression analysis showed that Power and Pressure had no significant effect on the cleaning Rate because of their P-values of 0.42 and 0.68. The weight for Flow is 11.55, and the weights for Power and Pressure are 1.4 and 0.7. Due to the limitations of the research equipment, which differed from those used in actual industrial settings, it was challenging to assess the effects in actual industrial environment. Therefore, to show an actual industrial environment, we conducted the cleaning process on a 12-inch PECVD chamber, which is production-level equipment, and quantitatively analyzed the effects of each variable. Power, Pressure, and NF3 Flow all had P-values close to 0, indicating strong statistical significance. The weight for Flow is 15.68, and the weights for Power and Pressure are 4.45 and 5.24, respectively, showing effects 3 and 7 times greater than those with the 6-inch equipment on the cleaning rate. Additionally, we analyzed the cleaning Stdev and derived that there is a trade-off between increasing the cleaning Rate and reducing the cleaning Stdev.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.1
• /
• pp.87-100
• /
• 2014

Environmental problems and the shortage of natural resources are currently gathering more attention in Korea and international countries. With these problems, it is reported that most current domestic buildings are emitting approximately 138 million tons of greenhouse gas. According to a recent report from the investigation of Korean housing population, the total number of households is approximately 12.9 millions, and the apartments that were built more than 15 years ago amounted to 3.1 millions. This shows that the rates of old apartment housings are increasing. Therefore, it is necessary to consider the deteriorated facilities and environmental improvement. Also, the construction industry is benefited by improving these housings which may need either remodeling or reconstruction. Environmental friendly buildings are a rising consideration for remodeling and reconstruction projects; it helps to determine many business matters in construction. The main purpose of this research is to improve environmental condition in apartments with comparison analysis between remodeling and reconstruction alternatives. This research is focused on characteristics of remodeling and reconstruction and it sets up the same condition with each level in order to evaluate the value of environmental friendliness and analyze its definition. The result of this research provides a unique emitting rate at a novel framework and this will cause the reduction of $CO_2$. It is analyzed that the remodeling construction can reduce the great amount of $CO_2$. Therefore, it will be a good decision guideline in selecting the most eco-friendly alternative to improve environment for building construction. Although reconstruction is a popular alternative nowadays in Korea, this research can provide a reason why decision makers should put more emphasis on remodeling as an environment-friendly alternative.

• Journal of Digital Convergence
• /
• v.15 no.10
• /
• pp.327-337
• /
• 2017

The purpose of this study is to investigate patient satisfaction for the spacial environment of the rehabilitative facilities, and by this to examine areas of patients' needs to develop patient-friendly improvement in spacial environment. 308 patients were surveyed at physical therapy centers of 6 hospitals or rehabilitative institutions in Daejeon with patient satisfaction questionnaire. The spatial environment satisfaction was categorized into 7 constructs and the data were statistically analyzed and compared by t-test and ANOVA according to the patient characteristics. As a result, inter-floor transfer was found to be the area with the least satisfaction, especially in the in-patient group. Locating floor level was the second lowest satisfied construct. Comfort was relatively highly satisfied construct overall, but patients with neurological disease had less satisfaction than with musculoskeletal disease. Patients in 20's were less satisfied in wayfinding than 60's. Satisfaction for interior design was lower in subject in 50's than 70's. These findings can be used as evidences to improve spacial environment design for rehabilitative facilities to the better patient satisfaction.

• Korean Journal of Environmental Biology
• /
• v.37 no.4
• /
• pp.554-567
• /
• 2019

Recently, concerns regarding the environmental impact due to nutrient input in croplands have increased. Therefore, the government is promoting the introduction of a nutrient management system in croplands to solve the problem of excessive nutrient input. This study was carried out to establish nutrient indicators in regional croplands to facilitate the introduction of the national nutrient management system in Korea. The nutrient load and balance indicators for nitrogen and phosphorus were analyzed for nine provinces (Gang-won, Gyeong-gi, Chung-buk, Chung-nam, Jeon-buk, Jeon-nam, Gyeong-buk, Gyeong-nam, and Jeju). In the correlation analysis between the nutrient load and nutrient balance, the correlation coefficient (r) for nitrogen was 0.2504, which was not statistically significant at the 5% significance level. However, the correlation coefficient for phosphorus was 0.7375, which was statistically significant at the 5% significance level. In the nutrient management index, phosphorus showed mutual compatibility between the nutrient load and the nutrient balance indicators, but nitrogen showed no mutual compatibility between the nutrient load and the nutrient balance indicators. Therefore, utilization of the nutrient balance indicator, reflecting the characteristics of the agricultural environment, was more reasonable as a nutrient management index for regional nutrient management.

• Korean Journal of Organic Agriculture
• /
• v.21 no.4
• /
• pp.617-627
• /
• 2013

This study was conducted to survey the current pest occurrence and grower's pest management practices, and to investigate biodiversity including birds, snakes, rodents, and amphibians in organic pear orchards. From the questionnaires and field survey of 22 organic orchards in 2010, the materials such as lime sulphur, plant extracts and their mixtures with microorganisms, and oils were preferred over insecticides. Scab, mealybugs, woollybugs and barkminers were the major pests for organic pear growers. Environment-friendly fungicides and insecticides were applied 9 to 10 and 5 to 6 times respectively. Incidence and severity of scab on Niitaka pear fruits in organic orchards was higher than in conventional ones. Whereas for mealybugs there was no significant difference between organic and conventional orchards. Pear fruits in organic orchards were significantly smaller than those of non-organic orchards. For the biodiversity of amphibians, snakes, pheasants, and rodents, there was no significant difference between organic and conventional orchards, but Rufous turtle doves were monitored more in organic areas than in conventional ones.