• 한국항행학회논문지
• /
• 제19권6호
• /
• pp.544-551
• /
• 2015

본 논문에서는 첨단 운전자 보조 시스템 (ADAS; advanced driver assistance system) 용 이동객체검출 (MOD; moving object detection)을 위한 광학흐름추정기 (OFE; optical flow estimator) 의 하드웨어 구조 설계 결과를 제시하였다. 광학흐름추정 알고리즘은 차량 환경에서 높은 정확도를 나타내는 광역 최적화 (global optimization) 기반 Brox 알고리즘을 적용하였다. Brox 알고리즘의 에너지 범함수 (energy functional)를 최소화 하는 과정에서 생성되는 Euler-Lagrange 방정식을 풀기 위해 하드웨어 구현에 용이한 Cholesky factorization이 적용되었으며, 메모리 접근율 (memory access rate)를 줄이기 위해 시프트 레지스터 뱅크 (shift register bank)를 도입하였다. 하드웨어 구현은 Verilog-HDL을 사용하였으며, FPGA 기반 설계 및 검증이 수행되었다. 제안된 광학흐름추정기는 40.4K개의 logic slice 및 155개의 DSP48s, 11,290 Kbit의 block memory로 구현되었다.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1274-1285
• /
• 2015

This paper deals with model reference adaptive system (MRAS) speed estimators based on a secondary flux for linear induction motors (LIMs). The operation of these estimators significantly depends on an adaptation mechanism. Fixed-gain PI controller is the most common adaptation mechanism that may fail to estimate the speed correctly in different conditions, such as variation in machine parameters and noisy environment. Two adaptation mechanisms are proposed to improve LIM drive system performance, particularly at very low speed. The first adaptation mechanism is based on fuzzy theory, and the second is obtained from an LIM mechanical model. Compared with a conventional PI controller, the proposed adaptation mechanisms have low sensitivity to both variations of machine parameters and noise. The optimum parameters of adaptation mechanisms are tuned using an offline method through chaotic optimization algorithm (COA) because no design criterion is given to provide these values. The efficiency of MRAS speed estimator is validated by both numerical simulation and real-time hardware-in-the-loop (HIL) implementations. Results indicate that the proposed adaptation mechanisms improve performance of MRAS speed estimator.

• 한국인터넷방송통신학회논문지
• /
• 제12권1호
• /
• pp.151-156
• /
• 2012

근사분산을 최대화하는 least favorable한 ${\epsilon}$-contaminated 정규분포는, 중간 영역에서는 가우시안이나 그 외의 영역에서는 라플라시안 분포를 갖는다는 사실에 근거하여 본 논문에서는 이 확률분포 하에서 비선형 잡음제거 알고리즘을 유도하고 이의 성능을 확인한다. 제안 알고리즘은 위 잡음 환경에서 MLE(maximum likelihood estimator) 이며, efficacy를 최대화한다는 기준에서 최적임을 증명한다. 또한, 유도한 필터를 미리어드 필터와 결합함으로써 임펄스 잡음을 효과적으로 제거하기 위한 비선형 필터를 제안하고 이를 이론적으로 분석한 다음 ${\alpha}$-stable 확률분포를 갖는 잡음에 열화된 이미지를 이용하여 그 성능을 확인한다.

• 한국음향학회지
• /
• 제18권7호
• /
• pp.45-55
• /
• 1999

본 논문에서는 그레인 잡음을 제거하기 위해서 웨이브렛 변환(wavelet transform)에 근간을 둔 웨이브렛 적응 필터(WLMS adaptive filter : Wavelet domain Least Mean Square adaptive filter)를 사용하였다. 보통 그레인 잡음은 고온의 환경에서 금속의 결정구조가 변화함에 따라 발생된다. 웨이브렛 평면에서의 적응 필터링은 필터의 입력신호를 직교 변환하여 입력으로 이용함으로써 수렴 속도를 향상시킬 수 있는 장점을 가지고 있다. 적응 필터의 기준 입력 신호는 원시 입력 신호를 지연시킨 신호를 이용하였으며, 적응 필터의 출력은 다시 CA-CFAR(Cell Average - Constant False Alarm Rate) 임계 추정기(threshold estimator)를 거쳐 자동적으로 원하는 신호부분만 나타내도록 하였다. 우선 신호의 통계적 특성을 알기 위하여 run 테스트를 수행하여 기준 입력 신호가 비정상성(nonstationarity)을 나타냄을 보였고, 웨이브렛 적응필터가 시평면 적응필터보다 수렴속도면에서 우수함을 보였으며, 각 적응 필터의 출력신호에 대해서 신호대 잡음비를 통해 성능평가를 하였다. 시평면 적응 필터링 후에는 신호대 잡음비가 2-3㏈ 향상을 보였고, 반면 웨이브렛 적응 필터링후에는 신호대 잡음비가 4-6㏈ 향상을 보였다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권6호
• /
• pp.571-575
• /
• 2005

A simple, but effective on-line method for estimating the mycelial cell mass concentration from agitation speed data, a most readily-available process variable, has been developed for DO-stat cultures of Agaricus blazei. The dynamic change of dissolved oxygen concentration (DOC) in the initial transient period and the change in yield were considered in the development of the estimation algorithm or estimator. Parameters in the estimation algorithm were calculated from the agitation speed data at 20% of DOC. The proposed estimator could accurately predict the cell mass concentration regardless of DOC levels in the tested range of $10{\sim}40%$, showing a good extrapolation capability.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.168-171
• /
• 2009

The solar lighting system has been popular in these days. It is composed of solar panel, controller, and battery. The battery is charged during the day time, and discharged at the night time. The battery status should be carefully controlled in order to guarantee the safe operation. If there were measurement noise or system noise, the performance of controller could be degraded. In this paper, the state estimator design in the noisy environment is proposed. The proposed system shows the excellent tracking performance under in harsh conditions.

• Journal of Communications and Networks
• /
• 제14권5호
• /
• pp.533-539
• /
• 2012

The performance analysis of wireless geolocation in a non-line-of-sight (NLOS) environment is a very important issue. Since Cramer-Rao lower bound (CRLB) determines the physical impossibility of the variance of an unbiased estimator being less than the bound, many studies presented the performance analysis in terms of CRLB. Several CRLBs for time-of-arrival (TOA), pseudo-range TOA, angle-of-arrival (AOA), and signal strength (SS) based positioning methods have been derived for NLOS environment. However, the performance analysis of time difference of arrival (TDOA) and TDOA/SS based geolocation techniques in a NLOS environment is still an opening issue. This paper derives the CRLBs of TDOA and TDOA/SS based positioning methods for NLOS environment. In addition, theoretical analysis proves that the derived CRLB for TDOA is the same as that of pseudo-range TOA and the TDOA/SS scheme has a lower CRLB than the TDOA (or SS) scheme.

• 전자공학회지
• /
• 제30권9호
• /
• pp.1002-1011
• /
• 2003

In this paper, we introduce an integrated SoC front-end design & verification environment which can be practically used in the embedded 32-bit processor-core SoC VLSI design. Our introduced SoC design & verification environment integrates two most important flows, such as the RTL power estimation and code coverage analysis, with the functional verification (chip validation) flow which is used in the conventional simulation-based design. For this, we developed two simulation-based inhouse tools, RTL power estimator and code coverage analyzer, and used them to adopt them to our RTL design and to increase the design quality of that. Our integrated design environment also includes basic design and verification flows such as the gate-level functional verification with back annotation information and test vector capture & replay environment.

• 한국인터넷방송통신학회논문지
• /
• 제9권2호
• /
• pp.111-116
• /
• 2009

본 논문은 차세대 고속무선 DTV(Digital Television)를 위한 터보복호기반의 위상 옵셋 추정 기법이 대해 연구하였다. 위상 추정기법은 터보 복호기 외부에 추정기를 두어 다음 상태의 위상을 추정하기 위해 LMS (Least Mean Square) 방식을 사용하였다. 기존의 LMS 방식은 구현이 간결하지만 고정의 스텝 사이즈를 가지고 있으므로 시간에 따라 변화하는 다중 경로 환경에서는 채널 추정이 힘들며 트래킹 능력이 떨어지는 단점을 가지고 있다. 따라서 본 논문에서는 고정 스텝 사이즈가 아닌 채널의 상태에 따라 스텝 사이즈를 변화 시키는 가변 스텝사이즈를 갖는 LMS 방식을 제안한다. 모의실험은 임의의 위상 옵셋에 대하여 수행되었으며, 제안한 방식이 기존의 방식에 비해 개선된 성능을 보임을 알 수 있었다.

• 동력기계공학회지
• /
• 제12권6호
• /
• pp.42-49
• /
• 2008

The most important job in the container terminal area is to handle the cargo effectively in the limited time. To achieve this object, many strategies have been introduced and applied to. If we consider the automated container terminal, it is necessary that the cargo handling equipments are equipped with more intelligent control systems. From the middle of the 1990's, an automated rail-mounted gantry crane(RMGC) and rubber-tired gantry crane(RTG) have been developed and widely used to handle containers in the yards. Recently, in these cranes, the many equipments like CCD cameras and sensors are mounted to cope with the automated terminal environment. In this paper, we try to support the development of more intelligent automated cranes which make the cargo handling be performed effectively in the yards. For this plant, the modelling, tracking control, anti-sway system design, skew motion suppressing and complicated motion control and suppressing problems must be considered. Especially, in this paper, the system modelling and tracking control approach are discussed. And, we design the tracking control system incorporating an observer based on the 2DOF servo system design approach to obtain the desired state informations. In the case of observer design, a weighted $H_{\infty}$ error bound approach for a state estimator is considered. Based on an algebraic Riccati equation(inequality) approach, a necessary and sufficient condition for the existence of a full-order estimator which satisfies the weighted $H_{\infty}$ error bound is introduced. Where, the condition for existence of the estimator is denoted by a Linear Matrix Inequality(LMI) which gives an optimized solution and observer gain. Based on this result, we apply it to the tracking control system design for the transfer crane.