• Korean Journal of Environmental Biology
• /
• v.25 no.4
• /
• pp.363-369
• /
• 2007

To understand property of distribution restricted at northern slope of Corylopsis coreana, we investigated process of sedentary formation from seed germination to seedling and its micrometeorological factors in Cheongsogol, Suncheon in Korea. The germination tests were carried out in-situ and manipulated condition, respectively. Air and soil temperatures, relative humidity, soil water contents and PPFD were measured in southern and northern slopes for four seasons. The seeds did not shown difference in germination to azimuth slope. However, seedling in the northern slope should have taken advantage on the sedentary stage of seedlings because there was low temperature and high humidity during the spring. At the southern slope, the seedlings seemed to have a disadvantage on high temperature and low humidity in spring season. Accordingly, the formation of Corylopsis coreana population is influenced by microclimatic factors, especially in low temperature and high humidity at the sedentary stage of the germinated seedlings.

• Journal of the Korea Furniture Society
• /
• v.21 no.3
• /
• pp.237-247
• /
• 2010

This research was carried out to examine the properties of black charcoal board, in order to find the proper manufacturing condition for the black charcoal-board made of the charcoal. The charcoal in this study was distillated from domestic wood waste, and it were also the purpose of this study to see if the black charcoal-board has the advantageous properties of charcoal as a well-being building material against the sick house problem. Domestic wood waste was consisted of MDF 40%, PB 30%, plywood 15% and wood 15%, respectively. Black charcoal board was produced by hot pressing with following conditions; temperature $170^{\circ}C$, three stage pressing cycle of $40-10-40\;kgf/cm^2$(1min.-2.5min.-5min.) and non formaldehyde adhesives [P15%+M5%:MDI(M), poly vinyl acetate emulsion(P). Fine mixed particle size [#6-12(16.9%), #12-18(16.7%), #12-40(47.2%), #40-60(9.5%), #60-100(5.9%), less than #100(3.8%)] gave better results than larger particle size [over #6(33.8%), #12-18(17.7%), #12-40(37.7%), #40-60(6.4%), #60-100(2.6%), less than #100(1.8%)]. Final moisture content of the mat was best at 36%. Black charcoal-board showed less MOR and IB(internal bond), more WA(water absorption) than that of white charcoal-board. Black charcoal board showed not only the same gas adsorption and dimensional stability as white charcoal board but also good cutting, nailing and drilling for indoor environment systems.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.149-162
• /
• 2017

Objectives: Six cases of non-oral occupational methanol poisoning were found in mobile phone parts manufacturers in South Korea during the period from 22 January 2016 to 5 October 2016. We conducted this study to determine the cause of the accident including social environment factor. Methods: We interviewed the cases. Based on that, we described this poisoning accident narratively and arranged the evolution of the accident in chronological order. We used the Haddon matrix method to investigate the cause of the accident. Results: It was found that six cases were all dispatched workers who were under poor working condition including working time exceeded 12 hours a day, not given basic occupational health and safety information etc. Occupational disease associated with dispatched work was difficult to be reported. 2 cases were not able to identify the cause of the disease within one year. Conclusions: In short, the direct cause of the poisoning accident was that workers were exposed to high concentration of methanol(over 1,000 ppm). One of the main fundamental cause is that dispatched worker is rampant in the supply chain of mobile phone production. To protect dispatched workers, appropriate occupational safety health measures are needed urgently.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.53-54
• /
• 2006

The main purpose of tunnel ventilation system is to maintain CO pollutant and VI (visibility index) under an adequate level to provide drivers with safe driving condition. Moreover, it is necessary to minimize power consumption used to operate ventilation system. To achieve the objectives, the control algorithm used in this research is reinforcement teaming (RL) method. RL is a goal-directed teaming of a mapping from situations to actions. The goal of RL is to maximize a reward which is an evaluative feedback from the environment. Constructing the reward of the tunnel ventilation system, two objectives listed above are included. RL algorithm based on actor-critic architecture and natural gradient method is adopted to the system. Also, the recursive least-squares (RLS) is employed to the learning process to improve the efficiency of the use of data. The simulation results performed with real data collected from existing tunnel are provided in this paper. It is confirmed that with the suggested controller, the pollutant level inside the tunnel was well maintained under allowable limit and the performance of energy consumption was improved compared to conventional control scheme.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.94-103
• /
• 2003

In case of environment requiring safety such as human body and requiring flexible shape, a conventional mechanical actuator system does not satisfy requirements. Therefore, in order to solve these problems. a research of various smart material such as EAP (Electro Active Polymer), EAC (Electro Active Ceramic) and SMA (Shape Memory Alloy) is in progress. Recently, the highest preferring material among various smart material is EP (Electrostictive Polymer), because it has very fast response time, powerful force and large displacement. The previous researches have been studied properties of polymer and simple control, but present researches are studied a polymer actuator. An EP (Electostrictive Polymer) actuator has properties which change variably ils shape and environmental condition. Therefore, in order to coincide with a user's purpose, it is important not only to decide a shape of actuator and mechanical design but also to investigate a efficient controller. In this paper, we constructed the control logic with an adaptive fuzzy algorithm which depends on the physical properties of EP that has a dielectric constant depending on time. It caused for a sub-actuator to operate at the same time that a sub-actuator system operation increase with a functional improvement and control efficiency improvement in each actuator, hence it becomes very important to manage it effectively and to control the sub-system which Is operated effectively. There is a limitation on the management of Main-host system which has multiple sub-system, hence it brings out the Multi-Vehicle Control process that disperse the task efficiently. Controlling the multi-dispersion system efficiently, it needs the research of Main-host system's scheduling, data interchange between sub-actuators, data interchange between Main-host system and sub-actuator system, and data communication process. Therefore in this papers, we compared the fuzzy controller with the adaptive fuzzy controller. also, we applied the scheduling method for efficient multi-control in EP Actuator and the algorithm with interchanging data, protocol design.

• Korean Journal Plant Pathology
• /
• v.13 no.4
• /
• pp.210-214
• /
• 1997

The experiment was conducted to obtain basic informations on the effects of key environments and fungicides on the sporulation, conidial germination and hitial growth of the hyphae of grape powdery mildew fungus Uncinula necator. Maximum sporulation occurred at RH 75~96% in vitro adiusted with sulfuric acid solution. Conidial germination and initial growth of the hyphae were better at 5% water agar than distilled water, and best at $26^{\circ}C$ and pH 5.0 of the substrates. Germination occurred equally well at light intensity of below 100 lux or dark condition, which was better at water agar supplemented with leaf extract 30% than pure water agar. The water agar supplemented with triazole fungicides reduced conidial germinations and initial growth of the hyphae signifcantly, in proportion to the increase in concentration of the fungicides, but the maguitude of reduction depended on the fungicides. Particularly in myclobutanil, reduction rate was very low as increased in concentration.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.15-22
• /
• 2015

The crop production technologies keep in improving and the cultivation becomes more standardization owing to the significant developments of various agricultural materials. The artificial soil and base system for root could be one of the major technologies for the modern cultivation especially for controlled horticulture. Although the perlite, cocopeat, and peat moss are the major components of the artificial soil and are broadly used for various application, there is a great need for the new alternative materials for overcoming the low nutrition and the possible shortage of raw materials. In this study, the application of oil palm EFB fiber as an alternative materials for artificial soil especially for the seeding pad components was evaluated. The changes in the structural properties and the functional properties such as moisture holding properties were compared by laboratory produced seeding pads with different mixture of oil palm EFB fiber. The addition of fibrillated EFB fiber resulted in the significant increase in durability of the seeding pad, which showed the possible application of EFB fiber to the seeding pad instead of the wood fiber (UBKP). The moisture holding properties and the germination condition characteristics of the EFB fiber showed the slight less than those of the cocopeat, which require more sophisticated study for improving the functional properties of seeding pad made of the EFB fiber.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.113-116
• /
• 2008

As the integration in semiconductor display develops, semiconductor process becomes multilayer. In order to form several layer patterns, etching process which uses photoresistor (PR) must be performed in multilayer process. Repeated etching processes which take long time and PR residue cause mortal problems in semiconductor. To overcome such problems, we studied about the solution which eliminates PR effectively by using normal dry and wet etching method using plasma activated PR strip solvent in liquid condition. At first, we simulate the device which activates the plasma and make sure whether gas flow in device is uniform or not. Under activated plasma, etching effect is elevated. This improvement reduces etching time as well as display production time of semiconductor process. Generally, increasing etching process increases environmental hazards. Reducing etching process can save the etchant and protect environment as well.

• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.287-294
• /
• 2012

In the high vacuum condition of the space, outgassing from any assembly of satellite can contaminate satellites, especially second surface mirror and optical lens, it cause satellite to fail in own missions. Therefore, all unit shall be check for compatibility with vacuum using CVCM (Collected Volatile Condensable Material) and TML (Total Mass Loss) in advance. CVCM and TML of the PZT-5 piezoelectric ceramic vibrator has less than 0.1% and 1.0% respectively. Also, it has less than 500 $ng/cm^2/hr$ of Thermoelectric Quartz Crystal Microbalance for vacuum bake-out test using high temperature(more than $80^{\circ}C$) and high vacuum (less than $5.0{\times}10^{-3}$ Pa). Thus, piezoelectric ceramic vibrator may be employed in the vacuum environments. Finally, it can be confirmed that the characteristics change of the piezoelectric ceramic vibrator is less than 1% under vacuum environments.

• Korean Journal of Veterinary Research
• /
• v.44 no.2
• /
• pp.251-257
• /
• 2004

This study was designed to determine optimal condition for expression of cloned Shigatoxin2e(Stx2e) gene from transformed E. coli PED18, to compare the cytotoxicity titer between cloned Stx2e and Stx2e from original strain, and to confirm of receptor binding affinity of Stx2e for use of development of receptor binding ELISA to detect of Stx2e. The optimum composition of medium for expression of Stx2e gene in E.coli host-vector system was definded as the medium containing 0.5% glucose and 0.5 mM IPTG. The cytotoxicity titer of expressed Stx2e for Vero cell was 1000 fold higher than that of Stx2e from original strain AY93258. The binding affinity of Stx2e to receptor globotetraosyl ceramide($Gb_4$) was confirmed by immunobloting.