• Journal of the Korea Institute of Building Construction
• /
• v.15 no.4
• /
• pp.367-373
• /
• 2015

In this study, fundamental properties of cement were reviewed to apply high fineness cement at low temperature environment. The classified high fineness cement has large proportion of particles below $10{\mu}m$ which affects early hydration: an overall reaction of cement hydration faster. As a result of using high fineness cement, setting time of concrete was reduced and compressive strength was higher than OPC at all ages. Especially, compressive strength was more than double its value compared with OPC after three days curing in low temperature. Faster reaction and higher heat of hydration was verified by calorimetry early and maximum heat of hydration was analyzed by adiabatic temperature raising test. The analysis of this study confirmed that high fineness cement can be suitable to be used in low temperature environment.

• Physical Therapy Korea
• /
• v.18 no.4
• /
• pp.60-67
• /
• 2011

Ultrasonography (US) is a recent technique that has proven to be useful for assessing muscle thickness and guiding the rehabilitation decision-making of clinicians and researchers. The purpose of this study was to determine the inter-rater reliability of the US measurement of transversus abdominis (TrA), internal oblique (IO), and external oblique (EO) thicknesses for different probe locations and measurement techniques. Twenty healthy volunteers were recruited in this study. Muscle thicknesses of the transversus TrA, IO, and EO were measured three times in the hook-lying position. The three different probe locations were as follows: 1) Probe location 1 (PL1) was below the rib cage in direct vertical alignment with the anterior superior iliac spine (ASIS). 2) Probe location 2 (PL2) was halfway between the ASIS and the ribcage along the mid-axillary line. 3) Probe location 3 (PL3) was halfway between the iliac crest and the inferior angle of the rib cage, with adjustment to ensure the medial edge of the TrA. The two different techniques of thickness measurement from the captured images were as follows: 1) Muscle thickness was measured in the middle of the muscle belly, which was centered within the captured image (technique A; TA). 2) Muscle thickness was measured along a horizontal reference line located 2 cm apart from the medial edge of the TrA in the captured image (technique B; TB). The intraclass correlation coefficient (ICC [3,k]) was used to calculate the inter-rater reliability of the thickness measurement of TrA, IO and EO using the values from both the first and second examiner. In all three muscles, moderate to excellent reliability was found for all conditions (probe locations and measurement techniques) (ICC=.70~.97). In the PL1-TA condition, inter-rater reliability in the three muscle thicknesses was good to excellent (ICC=.85~.96). The reliability of all measurement conditions was excellent in IO (ICC=.95~.97). Therefore, the findings of this study suggest that TA can be applied to PL1 by clinicians and researchers in order to measure the thickness of abdominal muscles.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.9
• /
• pp.1387-1394
• /
• 2013

Allergies are one of the most common chronic diseases during childhood. While the prevalence of allergic disease in children is increasing dramatically, few studies have evaluated the risk and preventive factors related to this health condition, especially in South Korea. The purpose of this case-control study was to evaluate independent determinants of allergic disease, and to examine whether it is associated with growth and other health conditions in childhood. The current study included 209 cases and 311 age and sex-matched controls (fifth and sixth graders) residing in Daegu, South Korea. Environmental data was collected, including child and family histories of allergies, birth information, and reaction to weaning foods during infancy. In addition, current dietary habits (assessed by 2 day-24 hr food records), health conditions, and anthropometric data were obtained through questionnaires and student health check-ups at the school. Based on chi-square tests, cases had a significantly higher prevalence of having a disease at birth, an allergic reaction to weaning foods, frequent hospital visits, and frequent experiences of the common cold and digestive diseases. In addition, significantly more mothers had a higher education in the cases compared to controls. Based on multivariable conditional logistic regression analysis, factors significantly associated with greater odds for having allergies were parental (OR=21.42) and fraternal (OR=14.40) histories of allergies. The anthropometric measures showed that cases tended to be shorter in height and lighter in weight than the controls, but these differences were not statistically significant. These findings may indicate that current nutrient intakes may not be the only critical factor associated with delayed growth delay in the allergic group. A well-planned, large cohort study is warranted to confirm our findings in the future.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.459-465
• /
• 2012

This study analyzed the effect of semi-rigid rafter-purlin cross-linking connection and driven steel pipe base on the static behavior of plastic greenhouse (PG). To promote the time and cost efficiency of the assembly process, each cross-linking connections of space arch type grid that consists of rafter and purlin is linked with steel-wire buckles, and each end of the rafters was driven directly to the ground to support the PG structure. However, in the design process, cross-linking connections and bases are idealized by being categorized as fully rigid or frictionless pinned, which does not appropriately reflect actual conditions. This study takes a full-scale loading test of PG and analyzes the effect of member cross-linking connections and driven steel pipe base on the behavior of a structure. The analysis provided a basis for determining the rigidity factor of member cross-linking nodes needed for finite element analysis, and the reliability of the result regarding the static behavior of PG.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.1-14
• /
• 2002

The most important issue in providing multimedia traffic on a mobile computing environments is to guarantee the mobile host(client) with consistent QoS(Quality of Service). However, the QoS negotiated between the client and network in one cell may not be honored due to client mobility, causing hand-offs between cells. In this paper, a call admission control mechanism is proposed to provide consistent QoS guarantees for multimedia traffics in a mobile computing environment. Each cell can reserve fractional bandwidths for hand-off calls to its adjacent cells. It is important to determine the right amount of reserved bandwidth for hand-off calls because the blocking probability of new calls may increase if the amount of reserved bandwidth is more than necessary. An adaptive bandwidth reservation based on an MPP(Mobility Pattern Profile) and a 2-tier cell structure has been proposed to determine the amount of bandwidth to be reserved in the cell and to control dynamically its amount based on its network condition. We also propose a call admission control based on this bandwidth reservation and "next-cell prediction" scheme using an MPP. In order to evaluate the performance of our call admission control mechanism, we measure the metrics such as the blocking probability of our call admission control mechanism, we measure the metrics such as the blocking probability of new calls, dropping probability of hand-off calls, and bandwidth utilization. The simulation results show that the performance of our mechanism is superior to that of the existing mechanisms such as NR-CAT1, FR-CAT1, and AR-CAT1.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.664-675
• /
• 2016

The purpose of the study was to explore the nurses' perception of flexible working and present an operational guideline for implementation. The data were collected from a survey of 532 nurses conducted from 10 February to 24 February, 2015, using simple random sampling. SPSS 21.0 was used to analyze the data. This study found that the demanding for shorter hour shifts was highest ($M=3.89{\pm}0.87$) and 242 participants (46.2%) intended to apply the shift, followed by a fixed night shift, fixed weekend shift, and 12 hour shift. The common reasons identified were the poor environment of shift work and the challenges of child care. The increased time for personal development, relaxation activity to improve the quality of life and child care was highlighted and work-life balance was noted as a positive impact of flexible working. The negative impacts of flexible working were being likely to become temporary workers. These results can help establish uniform working conditions of nurses in the future by providing a standardized operational guideline as a precondition for reasonable compensation and working environment according to a flexible working pattern.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.567-576
• /
• 2008

It is possible to understand rainfall infiltration characteristics by identification of wetting front in the soil. The wetting front by rainfall infiltration has close relationships among soil density, grain size distribution, and permeability coefficient in the soil. The infiltration velocity is a similar concept of permeability coefficient in the soil. In this study, infiltration velocity of rainfall was calculated by a field monitoring of volumetric water contents at the depths of 50 cm and 80 cm below the surface in the gneiss weathered soil. The calculated field infiltration velocity was compared with a permeability coefficient by a laboratory soil test using undisturbed soil samples in the study area. The permeability coefficient of the soil sample is $3.15{\times}10^{-3}cm/sec$, while the field infiltration velocity is $1.87{\times}10^{-3}cm/sec$. It is interpreted that the lower infiltration velocity is induced by complicate condition of porosity and grain size distribution of soil in the field. The rainfall intensity which influences on the volumetric water content and infiltration velocity is more than 20 mm/day resulting in expansion of wetting front in the soil.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.4
• /
• pp.179-185
• /
• 2005

Polycyclic aromatic hydrocarbons (PAHs) are a kind of toxic environmental pollutants and has been accumulated usually in marine sediments. Due to their potential hazardous to human, removal of PAHs from environments has been great concern. In the present study, the effect of microbial inoculation and the supplementation of mixed form cyclodextrin (M-CD) was assessed in the pre-sterilized or nonsterilized microcosms for optimizing operational conditions for ex situ bioremediation of sediments contaminated by PAHs. Activity of electron transport system (ETSA) was increased by the addition of M-CD regardless of inoculation of microorganisms in microcosms without sterilization. The degradation rate of PAHs in sterilized microcosms was app. 9-20% by the inoculation of single strain and 24-37% by the inoculation of microbial consortium supplemented with 1% M-CD, respectively. The degradation was not observed in microcosms without sterilization under the same conditions. The proportion of inoculated microorganisms also decreased in nonsterilized microcosms. Signals of inoculated bacteria were decreased to detection limit after 2 days in the microcosms without M-CD. In conclusion, microbial inoculation with appropriate carbon sources and removal of natural flora and grazers are required for the efficient ex situ bioremediation of sediments contaminated by PAHs in bioslurry reactor.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.697-708
• /
• 2016

As the needs for fast wireless communication technology in various fields, including companies, individuals, etc., grows, many research projects related to the coverage of propagation are being carried out for plaining optimized communication services. On the other hand, there are some limitations in surveying and analyzing propagation in highland areas. To provide a better communication service of a new service, a range of radio environment conditions based on a wide radio bandwidth (selection of propagation model, correction of value in accordance with radio bandwidth, etc.) should be considered. In particular, radio environment conditions are becoming increasingly sophisticated. By the early detection of real-time changes in the radio spectrum, which is based on an examination and research of regional occupied band width condition, proper measures should be established. To make a proper solution of above, the basic real-time analysis of spectrum distribution status by regional groups is necessary. In addition, the establishment of prompt measures should be enable by stored or analyzed radio data. In an attempt to predict reliable propagation coverage, this thesis examines the limited propagation data with HTZ Warfare, which were collected from domestic high land sites faced with limited access. Furthermore, a comparative result value evaluation for an optimized propagation model was performed through testing simulations, and frequency-dependent and propagation model-dependent analysis.

• Journal of Surface Science and Engineering
• /
• v.49 no.2
• /
• pp.166-171
• /
• 2016

Cathodic protection is widely recognized as the most cost effective and technically appropriate corrosion prevention methodology for the port, offshore structures, ships. When applying the cathodic protection method to metal facilities in seawater, on the surface of the metal facilities a compound of calcium carbonate($CaCO_3$) or magnesium hydroxide($Mg(OH)_2$) films are formed by $Ca^{2+}$ and $Mg^{2+}$ ions among the many ionic components dissolving in the seawater. And calcareous deposit films such as $CaCO_3$ and $Mg(OH)_2$ etc. are formed by the surface of the steel product. These calcareous deposit film functions as a barrier against the corrosive environment, leading to a decrease in current demand. On the other hand, the general calcareous deposit film is a compound like ceramics. Therefore, there may be some problems such as weaker adhesive power and the longer time of film formation uniting with the base metal. In this study, we tried to determine and control the optimal condition through applying the principle of cathodic current process to form calcareous deposit film of uniform and compact on steel plate. The quantity of precipitates was analyzed, and both the morphology, component and crystal structure were analyzed as well through SEM, EDS and XRD. And based on the previous analysis, it was elucidated mechanism of calcareous deposit film formed in the sacrificial anode type (Al, Zn) and current density (1, 3, $5A/m^2$) conditions. In addition, the taping test was performed to evaluate the adhesion.