• Korean Journal of Environmental Biology
• /
• v.27 no.4
• /
• pp.369-374
• /
• 2009

The stumpy bullhead (Pseudobagrus brevicorpus) endemic to Korea is one of critically endangered freshwater fish species. To provide baseline data for its captive breeding and reintroduction we investigated basal characteristics on its growth and sexual maturation in an artificial rearing environment. After 698-day rearing the stumpy bullhead grew up to $89.22{\pm}10.29\;mm$ in total length (TL) and $70.93{\pm}7.68\;g$ in total body weight (BW)($BW=5\times10^{-5}\;TL^{2.678}$; $R^2=0.995$), and showed survival rate of 74.2%. The sex ratio was 1 (471 females) : 1 (473 males), and males ($TL=87.44{\pm}1.07mm$; $BW=8.43{\pm}0.31\;g$) showed significantly faster growth than females ($TL=78.38{\pm}0.92mm$; $BW=6.38{\pm}0.20\;g$) after 663-day rearing. However, condition factor of females was significantly higher than that of males (P<0.05). The number of eggs per female ranged from 508 to 867 (average 734), and their diameters ranged from 0.04 to 1.65 mm. The females which reared about two years in the laboratory condition was able to spawn in the early June after 1~2 days of human chorionic gonadotropin (HCG) injection. The number of hatched fries ranged from 113 to 338 (average 216).

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.169-180
• /
• 2012

The ESBs (Environmental Specimen Banks) have monitoring functions for the contemporary environmental qualities and also offer the future generation tangible information on the past environment by preserving the specimens. This entails the sampling of the representative specimen for each distinctive ecosystem, which is performed under a strict and stipulated procedure and a condition that does not allow any change in the component so that a retrospective analysis can be readily done even in the distant future. It has been more than 30 years that some developing countries started collecting a broad spectrum of specimens to vindicate the effectiveness of an environmental policy and to monitor the long-term variations of background concentrations of environmental pollutants. Though being late, the National Institute of Environmental Research (NIER), Korea, has successfully launched the National Environmental Specimen Bank (NESB) in 2009 equipped with its state-of-the-art automated cryogenic tanks. Since then, the researchers at the NESB have been doing their best to excel the existing ESBs around the world by learning and improving the expertise. To do so, they conducted a pilot study for developing and testing their own Standard Operating Procedure (SOP) based on the analysis of the examples of the other ESBs. The problems from the pilot study had been reviewed to improve the SOP to meet the requirements for an ESB, that is to say, preserving representative environmental specimens in cryogenic condition and enhancing the analytical method. Furthermore, they also need to prepare themselves to address the future challenges by providing some additional functions, which makes it distinguishable from the other ESBs. If successful, this will be a step further to be recognized as a full-fledged member of the ESB society of the world.

• Korean Journal of Ecology and Environment
• /
• v.51 no.2
• /
• pp.192-203
• /
• 2018

Headwater streams provide various microhabitats, resulting in high diversity of macroinvertebrate community. In this study, we compared the differences of communities between two adjacent headwater streams (Jangjeon stream (GRJ; GRJ1-GRJ5) and Haanmi stream (GRH; GRH1-GRH3)) in Jungwang and Gariwang mountains, Gangwon-do and evaluated the effects of habitat condition to the macroinvertebrates community composition. In order to characterize the macroinvertebrate communities and extract influential environmental factors, we applied to Cluster analysis (CA), Indicator species analysis and Non-metric multidimensional scaling (NMDS). Total 33,613 individuals in 3 phyla, 5 classes, 13 orders, 51 families, and 114 taxa (genera or species) were collected. Gammarus sp. was dominant at the upper stream of GRJ, whereas Chironomidae spp. was abundant at GRH and the downstream of GRJ. The CA classified samples into six clusters (1-6) reflecting spatial and temporal variation of benthic macroinvertebrate communities. Benthic macroinvertebrate community composition was significantly different between two adjacent streams. Sweltsa sp. 1, Psilotreta kisoensis, Rhyacophila shikotsuensis and Serratella setigera were identified as representative indicator species for clusters 1, 2, 3 and 5, respectively. Similar to CA results, NMDS revealed the spatial and temporal differences of benthic macroinvertebrate communities, indicating the difference of community composition as well as microhabitat condition. Forest composition, proportion of boulders (>256 mm), and water velocity were main factors affecting the macroinvertebrate community composition.

• Journal of Wetlands Research
• /
• v.21 no.spc
• /
• pp.16-27
• /
• 2019

Alteration in the flow regime of rivers are caused by natural climate change and the changes in anthropogenic hydrological environment due to dam construction. These changes in flow regime cause serious changes not only in the fresh water ecosystems of the rivers but also in the physical structures and fish habitats of the streams. In this study, the alteration in the hydrological characteristics of the Gam river basin due to Buhang dam construction and the changes in ecological health condition, water quality, and river cross-section were analyzed. As a result of analysis by indicators of hydrologic alteration (IHA) to quantitatively change the flow regime of Gam river, HA (Hydrologic Alteration) is more than ±1 and various changes have occurred in the river ecosystem after Buhang dam construction. In addition, ecological health condition and water quality showed different response for each element, and in the case of riverbeds and channel cross-sections, the degradation of channel bed was obviously monitored after dam construction. The results of this study are expected to be used as an efficient method for evaluating changes in stream ecosystems caused by stream regime changes.

• Conservation Science in Museum
• /
• v.21
• /
• pp.29-40
• /
• 2019

An experimental study was conducted to test the applicability of natural hydraulic lime (NHL) as a reinforcing agent for the supporting layers of mural paintings in ancient tombs.Drawing upon preceding studies on mural paintings inancient tombs, samples of reinforcing agents for various conditions were prepared using NHL products, and pseudo-samples of the supporting layers of mural paintings were also produced. The samples were cured for 7, 28, and 84 days in a high-humidity condition similar to that of the mural-tomb environment. Physical properties such as dimensional stability and compressive strength were measured for each curing period.The results indicated that the NHL samples had a rapid curing speed and a low contraction ratio and are therefore suitable as reinforcing agents, whereas they showed a poor match in terms of strength compared to the supporting layer,and also low whiteness. The dimensional stability and compressive strength testsrevealedthat an NHL product mixed with a pseudo-sample of a supporting layer provided desirable conditions for reinforcing agent. The findings suggested that different conditions for curing time and strength should be considered for each supporting layer prior to applying NHL as a reinforcing agent for damaged mural paintings in ancient tombs.

• Korean Journal of Ecology and Environment
• /
• v.39 no.1 s.115
• /
• pp.62-72
• /
• 2006

Biological health in aquatic environments has been assessed by several approaches using various bio-taxa. Especially, fish has been identified as one of the best ecological indicators for an integrative health assessments in aquatic environments. In this preliminary study, the necropsy-based approach using the Health Assessment Index (Adams et al., 1993; HAI, Blazer, 2000), was employed for the assessments of aquatic environments influenced by effluent water from wastewater disposal plants (WDP) near a urban stream (i.e., Cap-Stream). For the impact analysis from the effluents, we developed 10 metric necropsy-based model including $M_l\;skin,\;M_2\;fin,\;M_3\;thymus,\;M_4\;spleen,\;M_5\;hindgut,\;M_6\;kidney,\;M_7\;liver.\;M_8\;eyes,\;M_9\;gill,\;and\;M_{10}$ pseudobranch. We set up duplicate controls (natural upstream water plus 5 fishes in each control tank) and duplicate treatments (effluent water from the WDP plus 5 fishes in each treatment tank) in the laboratory. Preliminary results showed that HAI values in the controls were zero, indicating an excellent condition by the criteria of HAI, while the HAI values in the treatments ranged between 40 and 150, indicating a poor condition. Also, various health conditions, based on the index of biological integrity (IBI), species richness, tolerance guilds, and trophic guilds supported the HAI approach. The HAI approach, not applied in Korea, not may be used as an surrogate fer ecological health assessment in lotic ecosystems.

• Journal of the Korea Convergence Society
• /
• v.8 no.8
• /
• pp.191-196
• /
• 2017

This study was conducted to investigate the effect of fine bubble water treatment on the growth of ginseng seedlings. The growth of ginseng seedlings which were treated with general water and fine bubble water was investigated. The above ground part, the growth of leaf was increased by about 10% and the growth of the stem was about 6%, as the ginseng seedlings which were treated with fine bubble water comparing to the ginseng seedlings treated with general water. Root length was increased about 5%, root width was increased about 8%, roots weight was increased about 9%, and dry weight was increased about 7%. This is not because the whole root growth was increased, but the main root growth was increased about 7%. These results suggested that the physical properties of the fine bubble water stimulated the growth of ginseng seedlings. These results are initial study in the case of ginseng seedlings. Therefore, it can be applicable to the 3-5 years old ginseng plants. Further research will be needed to find out the optimal cultivation condition by controlling the dissolved oxygen amount according to the soil condition and the research applied to the ginseng seedlings.

• Journal of Environmental Science International
• /
• v.23 no.5
• /
• pp.895-902
• /
• 2014

Bacterial cellulose (BC) has played important role as new functional material for food industry and industrial products based on its unique properties. The interest in BC from static cultures has increased steadily in recent years because of its potential for use in medicine and cosmetics. In this study, we investigated culture condition for BC production by Acetobacter sp. F15 in static culture. The strain F15, which was isolated from decayed fruit, was selected on the basis of BC thickness. The optimal medium compositions for BC production were glucose 7%, soytone 12%, $K_2HPO_4$ 0.2%, $NaH_2PO_4{\cdot}_2H_2O$ 0.2%, lactic acid 0.05% and ethanol 0.3%, respectively. The strain F15 was able to produce BC at $26^{\circ}C-36^{\circ}C$ with a maximum at $32^{\circ}C$. BC production occurred at pH 4.5-8 with a maximum at pH 6.5. Under these conditions, a maximum BC thickness of 12.15 mm was achieved after 9 days of cultivation; this value was about 2.3-fold higher than the thickness in basic medium. Scanning electron micrographs showed that BC from the optimal medium was more compact than plant cellulose and was reticulated structure consisting of ultrafine cellulose fibrils. BC from the optimal medium was found to be of cellulose type I, the same as typical native cellulose.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.4
• /
• pp.350-357
• /
• 2017

This study was conducted as a post - study on the development of a centralized controller and a hydraulic lift system including structural analysis and remote control for the development of a vertically elevated car. The safety review was carried out through the structural modification of the elevator lift which was developed during the previous research. 3D modeling was performed with Solidworks, and a model of finite element was created through Hypermesh S / W. In addition, the loading environment of the work vehicle for the evaluation is a condition in which the loading amount is 250 kg per position (total, upper, upper, lower, and lower) on the work table, ), The structural analysis was carried out under the condition that the load was 600 kg, and safety was examined in various aspects. As a result, when the allowable load of 250 kg and the excess load of 600 kg are excluded (except Case-11), the stress level is below the yield strength. In the case of Case-11, there is a region exceeding the yield strength at the center support portion of the safety bar at the upper end even after excluding the component which generates the maximum stress, but it does not affect the safety aspect of the whole structure Respectively. Looking at the deflection results, it can be seen that in all cases the maximum deflection occurs in the same table, and the tendency of sagging in both 250 kg and 600 kg is the same.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.592-597
• /
• 2013

The heat generated at the motor and inverter inside the electric compressor of inverter built-in type is mainly cooled by refrigerant and generally, there is not a thermal problem. However, the close relation of heat transfer from the motor and inverter parts to the compression part affects on compressor efficiency. Also, according to the surrounding environment and system operation condition, the increased temperature of the motor and inverter can affect the power density of the motor system, and especially, the inverter may be prevented to operate by the temperature limits. In this study, we performed thermo-flow analysis of electric compressor motor system, and investigated the heat dissipation enhancement of the motor and inverter. The motor part in the operation region of the electric compressor was generally maintained at low temperature and the inverter part at high compressor speed was lower temperature than the temperature limit of $85^{\circ}C$. However, the case of the inverter at low speed harsh condition was in excess of $10^{\circ}C$. Therefore, in order to solve the thermal problem, the heat reduction technology of the motor and inverter is essential as well as the improvement of flow path in the compressor.