• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1433-1443
• /
• 2016

In the cases of the major cities, high poverty rate of the elderly, immature pension policies, and insufficient market conditions, policies and services for the employment of the elderly decrease the desire for the job participation. It is time to prevent the problems of the elderly, and induce the reachable seniors to participate in social activities. This research provides the location-based, customized job-search service for the elderly in order to actively support the participation in the economic activities of the elderly. The goal of SSJS(Smart Senior Job Search) is to provide the individual elderly with the customized position. It prints the appropriate positions near user location based on the residential area, job classification, and the physical condition, and provides the mash-up of the selectable job range in the unit distance based on the map. This customized service, which enables the seniors to select the type of the jobs based on their physical, mental and life conditions of the seniors, supports the participation in economic activities of the elderly people, and contribute to the expansion of the social job positions for the elderly and the equalization of the local development.

• Journal of Surface Science and Engineering
• /
• v.25 no.3
• /
• pp.107-116
• /
• 1992

The optimum thickness of Pd-Ni plated layers used as an electrical contact film was investigated by evaluating mechanical, thermal and environmental characteristics. The variations of morphologies and chemical compositions were studied by using SEM, EDS and ESCA. As a result of wear test, the wear resistance behavior of the gold plated layers was not changed with the sliding velocity changes. The palladium-nickel plated layer showed better wear resistance than the gold plated layer at low sliding velocity, but it showed poor wear resistance at high sliding velocity. Under the thermal condition of $400^{\circ}C$ in air, the gold thickness of $2\mu\textrm{m}$ without underplate on phosphorous bronze formed copper oxide on the surface layer by rapid diffusion of copper whereas the gold thickness of $0.8\mu\textrm{m}$ deposited on nickel and palladium-nickel underplate was stable at $400^{\circ}C$. Under the sulfur dioxide environments, the gold thickness of $0.3\mu\textrm{m}$ deposited on the nickel thickness of$ 3\mu\textrm{m}$ and the palladium-nickel thickness of $2\mu\textrm{m}$ underplate was more corrosion-resistant than the gold thickness of $2\mu\textrm{m}$ without underplate on phosphorous bronze. Under the nitric acid vapor environment, corrosion resistance of the gold film was superior to an equivalent thickness of the palladium-nickel film.

• Journal of Surface Science and Engineering
• /
• v.26 no.6
• /
• pp.291-298
• /
• 1993

In order to substitute for porous nickel anode in Molten Carbonate Fuel Cell(MCFC), porous cermet elec-trode was fabricated with Ni and Ni-P coated ceramic powder. Ni and Ni-P were coated by electroless plat-ing method in the nickel solution containing of hydrazine and sodium hypophosphate as a reducing agent. The plating solution was stirred by air and mechanical agitator. Ultrasonic irradiation was applied to the plating bath to improved the effect of agitation and coating speed. Electorde was formed by pressing method and doc-tor blade method followed by sinterd at$ 800^{\circ}C$ for 6 hours in H2 environment. Anode performance test carried out by potentiodynamic polarization technique in the MCFC operating condition and 154-161mA/$\textrm{cm}^2$ as ob-tained as a anode current density at the+100mV overpotential.

• The Southeast Asian review
• /
• v.20 no.2
• /
• pp.101-133
• /
• 2010

Nowaday our school education have been undergone decisive influences by the entrance and examination-oriented education system. To enter universities which belong to top classes in Korean society could be look upon the important success of school education, and it could be equaled to the quality of competent teacher(teacher's professionalism). However, the creativity and knowledge composition ability in the school education will be considered seriously in the coming of 21st century knowledge, information-oriented and globalization society. In this situation, we try to trace about the system and style of foreign school education which is unfamiliar to us, spontaneously we should explore the educational implication which affects to our school education. In this paper, we have reviewed about the present condition and the current situation of Philippines school education(San Beda College Alabang and Rizal Campus). Of course, we tried to observe the practical education activities including a curriculum, teacher, teaching and studying method and student activity. Through this trial, we tried to suggest the effective environment and methodology for the improvement in quality of our school education. Philippines school education 1) could be achieved educational ideas and goals based on the spirit of school establishment, 2) could be gained teacher's professionalism through the system of Coordinator and Prefect, 3) could be conducted learner-centered lessons by the learning method of exploration, discussion, task-resolving, 4) was able to created a pleasant school education through the development and application of a variety of educational programs.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2413-2420
• /
• 2018

Sida acuta, a common type of weed in Thailand, contains relatively high cellulose (42.7%) content. We pretreated NaOH to improve glucose recovery from S. acuta. The effect of pretreatment temperature and NaOH concentration was fundamentally investigated based on hydrolysis efficiency with recovery of solid fraction. The pretreatment condition was determined to be 3% NaOH at $60^{\circ}C$ for 9 h, which showed the highest glucose recovery. The hydrolysates obtained by enzymatic hydrolysis of S. acuta were applied to the fermentation of Saccharomyces cerevisiae K35, and a theoretical yield of 97.6% was achieved at 18 h. This indicated that the hydrolysates medium without detoxification had no negative effects on the fermentation. The production of biomass into bioethanol was evaluated based on the material balance of 1,000 g basis. Following this estimation, approximately 28 g and 110 g bioethanol could be produced by untreated and pretreated S. acuta, respectively, and this production was improved about 3.9-fold by NaOH pretreatment. These results again show the importance of pretreatment in biorefinery process.

• Korean Journal of Remote Sensing
• /
• v.25 no.3
• /
• pp.225-231
• /
• 2009

The characteristics of morphological shapes, wave heights, tidal ranges and sediment sizes are observed and compared between intertidal beach and mudflat. The Mohang sand beach, southwest coast of Korea, is located just next to the large mudflat and has tidal range over 5 meters. Wave measurements are conducted at each entrance of the beach and mudflat as well as at the outside waters representing the incident waves to these different coastal environments. The morphological characteristics are also examined including the sediment size and the slope of the bathymetry, For the observation of morphological shapes, camera monitoring technique is used to measure the spatial information of intertidal bathymetry. The water lines moving on the intertidal flat/beach durinq a flood indicate depth contours between low and high water lines. The water lines extracted from the consecutive images are rectified to get the ground coordinates of each depth contours and integrated to provide three dimensional information of intertidal topography. The wave data show that sand beach is in the condition of severer wave forcing but tidal range is almost identical in both environment. The slope of the mudflat is much milder than the sand beach with finer sediment.

• Korean Journal of Remote Sensing
• /
• v.3 no.1
• /
• pp.1-10
• /
• 1987

The study was performed to recognize the most preferable spectral chennels for discriminating geological materials using the portable radiometer. The portable radiometer covers the visible and short infrared regions from approximately 0.4 to 2.5 microns which are coincided with Landsat TM, and the rock samples used for the study are pyrophylites, andesites, granite, granodiorite and silicified sedimentary rocks which are collected in Yangsan-Dongrae fault area. The analysis of the rock sample provides a preliminary basis for determining the wavelength regions showing diagnostic spectral features and for discriminating hydrothermal altered rocks from the unaltered rocks. The measurement of spectral of spectral reflectance for the rock samples was carried out in the laboratory which environment condition such as temperature, light sources, and humidity are constant. The analysis of the measured data was based on correlation between the reflectance value of the rock samples, and the follow discriptions are output of the study. 1) Pyrophyllite shows absorption at 0.83 $\mu\textrm{m}$ due to the oxidation of pyrite, and absorption at 2.22 $\mu\textrm{m}$ due to OH. 2) The altered rocks have generally higher reflectance than the unaltered rocks. 3) The ratio mesurement of pyrophyllites shows strong absorption at band 5/6 and band 6/4(in Landsat TM 5/7, 7/4). The ratio 1/5(Landsat TM 1/5) may be useful to discriminate andesite from the granite.

• Korean Journal of Remote Sensing
• /
• v.24 no.1
• /
• pp.79-89
• /
• 2008

Irregular temporal sampling is a common feature of geophysical and biological time series in remote sensing. This study proposes an on-line system for reconstructing observation image series contaminated by noises resulted from mechanical problems or sensing environmental condition. There is also a high likelihood that during the data acquisition periods the target site corresponding to any given pixel may be covered by fog or cloud, thereby resulting in bad or missing observation. The surface parameters associated with the land are usually dependent on the climate, and many physical processes that are displayed in the image sensed from the land then exhibit temporal variation with seasonal periodicity. A feedback system proposed in this study reconstructs a sequence of images remotely sensed from the land surface having the physical processes with seasonal periodicity. The harmonic model is used to track seasonal variation through time, and a Gibbs random field (GRF) is used to represent the spatial dependency of digital image processes. The experimental results of this simulation study show the potentiality of the proposed system to reconstruct the image series observed by imperfect sensing technology from the environment which are frequently influenced by bad weather. This study provides fundamental information on the elements of the proposed system for right usage in application.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.7
• /
• pp.715-719
• /
• 2000

A ceramic powder of destructive adsorbent was synthesized by impregnating copper and manganese on the surface of silica aerosil@. In-site FTIR measurements on pulses of malodorant tert-butylmercaptan injected over the powder showed that rert-butylmercaptan dimerized into di-tert-hutyldisulfide on the surface of the adsorbent in an ambient condition. GC/MS measurement on the gas over the adsorbent showed no tert-butylmercaptan remaining, and showed only the dimerization product of di-tert-butyldisulfide. Most of the dimerization product, di-tert-butyldisulfide,remained on the surface of the adsorbent as physisorbed condense, and apparently Iowered the destruction efficiency by blocking the surface from the access by tert-butylmercaptan. Upon being heated above $100^{\circ}C$ it was observed that the physisorbed di-tert-butyldisulfide dissociated back into tert-butylmercaptan. tert-butylmercaptan physisorbed on the activated carbon, thereby no dimerization was occurring on the surface of the activated carbon. In an argn environment, the dimerization reaction was practically not occurring even on the surface of the adsorbent, indicating the free oxygen in air was also participating in the dimerization reaction. Water was identified as a by-product of the dimerization reaction. Possible reactions on the surface of the adsorbent were proposed.

• Journal of Surface Science and Engineering
• /
• v.52 no.5
• /
• pp.251-257
• /
• 2019

Fe-9Cr-2W steels were corroded at $600-800^{\circ}C$ for up to 100 hr in ($Na_2SO_4-K_2SO_4-Fe_2O_3$)-($CO_2-0.3%SO_2-6%O_2$) mixed gas. The poor condition samples formed thick oxide scales that consisted primarily of $Fe_2O_3$ as the major oxide and $Fe_3O_4$, FeO as the minor one through preferential oxidation of Fe. Fe-9Cr-2W steels corroded fast, forming thick and non-protective scale. The scale divided into the outer and inner layer, which consisted of the outer Fe-O layer and the inner (Fe,Cr)-O layer containing some (Fe,Cr)-S.