• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1656-1662
• /
• 2005

This paper introduces M-PPAM(M-ary Pulse Position and Amplitude Modulation) architecture, combined PPM(Pulse Position Modulation) with PAM(Pulse Amplitude Modulation). Since M-PPAM can transmit several bits using one pulse, it is mon effective than PPM or PAM. Also, to obtain the same data transmission rate with PPM or PAM, M-PPAM can use a long pulse repetition period. This method will be able to use in the multi-path fading environment such as indoor condition. To accomodate multiple users, direct sequence technique is used. This paper has provided the modeling method of the M-PPAM DS-UWB receiver covering multi-user interference(MUI) with the Standard Gaussian Approximation under Gaussian channel. The performance of the receiver is simulated.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.16-20
• /
• 2003

Recently, The fast change of fishing boat fishery surrounding environment is connected by request of fan shape development that meet in restructuring of existing fishing boat fishery and new community, economical surrounding. In southern sea district along the coast work and district along the coast fishing bats that sail to exposed propeller fishing net, rope etc.. cold real condition that accident is increasing every year. This study is thing which analyze main performance of minuteness water jet type district along the coast fishing boat through model examination to propeller protection tunnel sticking district along the coast fishing boat that correct existing stem shape for marine accident prevention of district along the coast fishing boat in viewpoint such as ideal and examines.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.879-884
• /
• 2012

In this paper, we analyze the sharing parameters in order to co-use of different communication systems in adjacent channels. We analyze the performance result according to various density of interfering transmitter and transmitter output in hetero systems. In order to get the relationship with between density of interfering transmitter and transmitter output, we consider the case that WiBro is an interfering transmitter an WLAN is a victim receiver. When the interferer density is 50/$km^2$ and the center frequency of WLAN and WiBro are 185 and 201MHz respectively, required guard band is 4MHz. Analyzed coexistence results may be widely applied into the technique developed to get the coexisting condition for wireless devices using many communication protocols in same frequency.

• Journal of Surface Science and Engineering
• /
• v.37 no.1
• /
• pp.5-12
• /
• 2004

The enhancement of adhesion for Cu film on polycarbonate (PC) surface with the $Ar/O_2$ gas plasma treatment and dc-bias sputtering was studied. The plasma treatment with this reactive mixture changes the chemical property of PC surface into hydrophllic one, which is shown by the variation of contact angle with surface modification. The micro surface roughness that also gives the high adhesive environment is increased by the $Ar/O_2$ gas plasma treatment. These results were observed distinctly from the atomic force microscopy (AFM). The negative substrate dc-bias effect for the Cu adhesion on PC was also investifated. Accelerated $Ar^{+}$ lons in sheath area of anode bombard the bare surface of PC during initial stage of dc bias sputtering. PC substrate. therefore, has severe roughen and hydrophilic surface due to the physical etching process with more activated functional group. As dc-bias sputtering process proceeds, morphology of Cu film shows better step coverage and dense layer. The results of peel test show the evidence of superiority of bias sputtering for the adhesion between metal Cu and PC.C.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.781-788
• /
• 2001

As changing financial environment and increasing the number of access channel to banking system, new banking system is needed which can be developed financial commodity rapidly, can be deployed easily, and can be maintained easily. Component based development method is believed to meet these demands. In this paper, we propose EJB banking component and explain its system architecture and functionality. And we design and implement approval system on EJB banking component system. To implement approval system, approval conditions are classified and registered. Using registered approval condition, transactions are classified whether approval is needed or not. Approval client for web based client standardization has an advantage of no need to deploy and manage software version.

• Journal of Power Electronics
• /
• v.10 no.2
• /
• pp.187-193
• /
• 2010

This paper proposes a cooling system using thermoelectric elements for improving the output of building integrated photovoltaic (BIPV) modules. The temperature characteristics that improve the output of a BIPV system have rarely been studied up to now but some researchers have proposed a method using a ventilator. The efficiency of a ventilator depends mainly on the weather such as wind, irradiation etc. Because this cooling system is so sensitive to the velocity of the wind, it is unable to operate in the nominal operating cell temperature (NOCT) or the standard test condition (STC) which allow it to generate the maximum output. This paper proposes a cooling system using thermoelectric elements to solve such problems. The temperature control of thermoelectric elements can be controlled independently in an outdoor environment because it is performed by a micro-controller. In addition, it can be operated around the NOCT or the STC through an algorithm for temperature control. Therefore, the output of the system is increased and the efficiency is raised. This paper proves the validity of the proposed method by comparing the data obtained through experiments on the cooling systems of BIPV modules using a ventilator and thermoelectric elements.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.8
• /
• pp.1975-1986
• /
• 1997

Recent evolution of communication networks has led toward increasingly a complex, large-scale protocol. Protocol conformance tests therefore, which consider only control flow, have many problems on testing data flow, transition condition, delay and so on. We propose, design, and implement the tool to solve these problems. The tool, which solves nondeterminism, generates test suites from an integrated flow graph and excludes infeasible path with reachable tree. The presented tool reduces the length of UIO sequence and is efficient partially to test the path that error rate is high. Our automatic test suite generator provides basis of protocol testing environment and high production.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2019-2021
• /
• 2005

This paper describes the cut off time and the current characteristics of virgin RCDs and deteriorated ones in the seashore. The RCDs(Residual Current Protective Devices) are used for protecting the human body from electrical shock and for preventing facility accidents. According to the Korean standards, the RCDs are installed in panel boards. When RCDs are installed outside, they must be enclosed inside waterproof cases. In the case that RCOs are employed at temporary power sites and electrical facilities on the road, they are exposed to the external environment. As a result, the RCDs deteriorated in the seashore for 3 months showed high failure rate, while the virgin RCDs all complied with Korean Standard. Considering that the RCDs are used under exposed condition outside, the reliance of RCDs must be ensured by modifying the related regulations and codes and by developing Improved models advanced in their performance.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.244-247
• /
• 2004

The electrical insulating design is important to realize a HTS power cable because the cable is operated under the high voltage environment. For the insulation design of a HTS power cable, it is necessary to investigate the AC, impulse breakdown and partial discharge(PD) inception stress of liquid nitrogen/LPP composite insulation system. Based on these results, the electrical insulation of a HTS power cable is designed and Mini-model cables are manufactured. The manufactured Mini-model cables are evaluated that AC, impulse withstand voltage, breakdown and partial discharge inception stress and analyzed characteristics insulation of HTS cable bending condition according to this paper. From these tests, the AC, impulse withstand voltage test and partial discharge inception stress is satisfied "standard technical specification of KEPCO" in Korea and the breakdown voltage was 120kV.

• Explosives and Blasting
• /
• v.20 no.2
• /
• pp.7-19
• /
• 2002

The cut is placed high up in the section, the 1st sloping holes below the cut, and divided all the holes located below the 1st sloping holes into a certain area with longitudinal section, to lower pollution made from tunnel blasting. With the sequential blasting machine, after I first blasted holes around the cut holes by a pre-splitting method, blasted the cut area and the 1st sloping holes. The 1st and 2nd sloping holes divided areas are initiated gradually to free face upwards made by the cut. Especially, I pre-splinted contour holes previous blast the before sloping holes from the contours. The ground vibration from the earth surface just over the advance face decreased about 42.0% compare with the down blasting method under the condition of equal charge weight per delay. I controlled the crack and over break of the mother rock by pre-splitting contour holes before blast the first sloping holes from the contours. The peak values of noise and air blast by blasting decreased about 10dB more than the down blasting method. the noise and air blast diminished gradually as a round. The throw distance of the fly rock was decreased about 55%.