• 제목/요약/키워드: envelope stress

검색결과 68건 처리시간 0.021초

Energy dissipation response of brick masonry under cyclic compressive loading

  • Senthivel, R.;Sinha, S.N.
    • Structural Engineering and Mechanics
    • /
    • 제16권4호
    • /
    • pp.405-422
    • /
    • 2003
  • Scaled brick masonry panels were tested under cyclic unialxial compression loading to evaluate its deformation characteristics. An envelope stress - strain curves, a common point curves and stability point curves were obtained for various cyclic test conditions. Loops of the stress-strain hysteresis were used to determine the energy dissipation for each cycle. Empirical expressions were proposed for the relations between energy dissipation and envelope and residual strains. These relations indicated that the decay of masonry strength starts at about two-third of peak stress.

Deformation characteristics of brick masonry due to partial unloading

  • Alshebani, Milad M.;Sinha, S.N.
    • Structural Engineering and Mechanics
    • /
    • 제11권5호
    • /
    • pp.565-574
    • /
    • 2001
  • Experimental investigation into the behaviour of half-scale brick masonry panels were conducted under cyclic loading normal to the bed joint and parallel to the bed joint. For each cycle, full reloading was performed with the cycle peaks coinciding approximately with the envelope curve. Unloading, however, was carried out fully to zero stress level and partially to two different stress levels of 25 percent and 50 percent of peak stress. Stability point limit exhibits a unique stress-strain curve for full unloading but it could not be established for partial unloading. Common point limit was established for all unloading-reloading patterns considered, but its location depends on the stress level at which unloading is carried to. Common point curves were found to follow an exponential formula, while residual strains versus envelope strains can be expressed by a polynomial function of a single term. The relation between residual strain and envelope strain can be used to determine the stress level at which deterioration due to cyclic loading began.

Inducible spy Transcription Acts as a Sensor for Envelope Stress of Salmonella typhimurium

  • Jeong, Seon Mi;Lee, Hwa Jeong;Park, Yoon Mee;Kim, Jin Seok;Lee, Sang Dae;Bang, Iel Soo
    • 한국축산식품학회지
    • /
    • 제37권1호
    • /
    • pp.134-138
    • /
    • 2017
  • Salmonella enterica infects a broad range of host animals, and zoonostic infection threatens both public health and the livestock and meat processing industries. Many antimicrobials have been developed to target Salmonella envelope that performs essential bacterial functions; however, there are very few analytical methods that can be used to validate the efficacy of these antimicrobials. In this study, to develop a potential biosensor for Salmonella envelope stress, we examined the transcription of the S. enterica serovar typhimurium spy gene, the ortholog of which in Escherichia coli encodes Spy (${\underline{s}}pheroplast$ ${\underline{p}}rotein$ ${\underline{y}}$). Spy is a chaperone protein expressed and localized in the periplasm of E. coli during spheroplast formation, or by exposure to protein denaturing conditions. spy expression in S. typhimurium was examined by constructing a spy-gfp transcriptional fusion. S. typhimurium spy transcription was strongly induced during spheroplast formation, and also when exposed to membrane-disrupting agents, including ethanol and the antimicrobial peptide polymyxin B. Moreover, spy induction required the activity of regulator proteins BaeR and CpxR, which are part of the major envelope stress response systems BaeS/BaeR and CpxA/CpxR, respectively. Results suggest that monitoring spy transcription may be useful to determine whether a molecule particularly cause envelope stress in Salmonella.

Salmonella Enteritidis와 Salmonella Gallinarum의 세균막 스트레스를 인식하는 spy-gfp 오페론 융합 (The spy-gfp Operon Fusion in Salmonella Enteritidis and Salmonella Gallinarum Senses the Envelope Stress)

  • 강보경;방일수
    • Journal of Dairy Science and Biotechnology
    • /
    • 제36권4호
    • /
    • pp.208-219
    • /
    • 2018
  • 낙농업 및 유가공 제품의 생산과 유통에서 살모넬라 감염에 의한 살모넬라증의 발생은 빈번하며, 이 세균의 항미생물 제제에 대한 내성 증가 현상 또한 지속되고 있어 새로운 항미생물 제제의 수요는 감소하지 않는다. 세균막의 훼손은 세균 생존을 쉽게 위협할 수 있기 때문에 개발되는 항미생물 제제들은 주로 세균의 막을 표적으로 삼지만, 개발되는 제제들이 실제로 세균막의 훼손을 초래하는지 구별하는 것은 많은 노력과 비용을 수반한다. 본 연구에서는 E. coli 세포막 스트레스에 의해 발현이 유도되고, 세균막 외부공간에서만 위치하며, 그 구조상 많은 단백질의 구조 안정화에 기여할 것으로 예상되는 chaperone 단백질 Spy(spheroplast protein Y)의 유전자에 상응하는 살모넬라 spy 유전자에 gfp(green fluorescence protein) 오페론 융합체를 제조하여, 이 융합체가 Salmonella enterica의 두 혈청형 Enteritidis와 Gallinarum의 세포막 스트레스를 인지하여 GFP 발현량이 크게 증가하는 것을 확인하였다. 또한 세균막 스트레스 신호를 특이적으로 인지하는 이인자 신호전달 체계(two component signal transduction system)인 Bae와 Cpx들이 두 살모넬라 혈청형의 spy 유전자 전사 유도에 필수적임을 확인하였다. 따라서 본 연구에서 사용한 spy-gfp 오페론 융합체는 S. Enteritidis와 S. Gallinarum의 세포막 훼손을 특이적이고 신속하게 인식하는 biosensor로서 활용될 수 있을 것으로 판단된다.

퓨리에 기술자를 이용한 점성토의 변형률 응답 곡선의 형상 변이 분석 (Showing Morphological Evolution of the Strain Response Envelope of Clay with Fourier Descriptor Analysis)

  • 김태식;정영훈
    • 한국지반환경공학회 논문집
    • /
    • 제18권3호
    • /
    • pp.25-30
    • /
    • 2017
  • 본 논문에서는 변형률 응답 곡선의 형상을 정량적으로 분석하는 새로운 기법을 소개하였다. 변형률 응답 곡선은 응력 공간에서 단위 응력을 입력하였을 때의 발생한 변형률을 변형률 공간에 작성한 이미지이다. 변형률 응답 곡선의 형상 변화 특성을 퓨리에 기술자를 이용하여 분석하였으며, 탄소성 모델 기반으로 그 의미를 해석하였다. 전산해석결과 응력 경로가 항복면 내부에 머물러 탄성 변형만 존재할 경우, 퓨리에 기술자는 일정하게 그 값을 유지하였으나 응력 경로가 항복면에 도달하여 소성변형이 발생하는 순간 퓨리에 기술자는 변화하였다. 불교란 자연 시료와 재성형 시료에 대해 실시한 응력 경로 시험 결과, 자연 시료에 대해서만 응력 경로가 항복면에 도달하였을 때 명확한 변형률 응답 곡선의 형태 변화가 발견되었으며, 퓨리에 기술자 값도 명확하게 변화하였다. 퓨리에 기술자 중, 비대칭성과 관련 있는 퓨리에 기술자 값이 항복 및 점성토 구조변화의 지표로 활용할 수 있는 것을 확인하였다.

가는 모래의 전단강도 -파괴포락선의 곡률특성과 상태정수에 관하여- (Shear Strength of Fine Sand -Curvature Characteristics of Failure Envelope and Stress Parameter-)

  • 윤여원
    • 대한토목학회논문집
    • /
    • 제14권1호
    • /
    • pp.195-202
    • /
    • 1994
  • 본 연구에서는 모래의 전단파괴 포락선의 곡률특성을 구명하고 전단강도와 Been과 Jefferies가 제시한 상태정수간의 매개변수관계를 밝히기 위하여 많은 압밀배수삼축시험의 결과를 분석하였다. 통상적인 삼축시험에서 시료의 단면적 변화와 멤브레인의 영향에 대한 수정은 특히 한계상태를 결정하는데 중요하다고 할 수 있다. 실험결과로부터 전단강도를 밀도와 응력수준의 함수로 표현하는 모델을 제시하였고 모래의 전단파괴포락선의 곡률특성과 상태정수와 전단강도정수간의 관계를 밝혔다.

  • PDF

Calculation model for the shear strength of unsaturated soil under nonlinear strength theory

  • Deng, Dongping;Wen, Shasha;Lu, Kuan;Li, Liang
    • Geomechanics and Engineering
    • /
    • 제21권3호
    • /
    • pp.247-258
    • /
    • 2020
  • The shear strength of unsaturated soils, a research hotspot in geotechnical engineering, has great guiding significance for geotechnical engineering design. Although kinds of calculation models for the shear strength of unsaturated soil have been put forward by predecessors, there is still need for new models to extensively consider the nonlinear variation of shear strength, particularly for the nonlinear effect of the net normal stress on the shear strength of unsaturated soil. Here, the shear strength of unsaturated soils is explored to study the nonlinear effects of net normal stress with the introduction of a general nonlinear Mohr-Coulomb (M-C) strength criterion, and the relationship between the matric suction (or suction stress) and degree of saturation (DOS) constructed by the soil-water characteristics curve (SWCC) of van Genuchten is also applied for unsaturated soil. Then, two calculation models (i.e., an envelope shell model and an effective stress model) are established for the shear strength of unsaturated soils under the nonlinear strength theory. In these two models, the curve of the shear strength of unsaturated soils versus the net normal stress exhibits a tendency to gently. Moreover, the proposed formulas have flexibility and convenience with five parameters (for the effective stress model) or six parameters (for the envelope shell model), which are from the M-C strength parameters of the saturated soil and fitting parameters of SWCC of van Genuchten. Thereafter, by comparison with the classical theory of the shear strength of unsaturated soils from some actual cases, the rationality and accuracy of the present models were verified.

응력무차원화 변환을 이용한 Hoek-Brown 파괴함수의 Mohr 파괴포락선 유도 (Derivation of Mohr Envelope of Hoek-Brown Failure Criterion Using Non-Dimensional Stress Transformation)

  • 이연규
    • 터널과지하공간
    • /
    • 제24권1호
    • /
    • pp.81-88
    • /
    • 2014
  • Hoek-Brown 파괴함수를 적용하여 암반구조물의 안정성 분석을 수행하는 경우 암반의 강도를 내부마찰각과 점착력을 이용하여 평가해야하는 경우가 있다. 이러한 경우 ${\sigma}_1-{\sigma}_3$ 관계로 표시된 본래의 Hoek-Brown 함수는 수직응력 (${\sigma}$)과 전단응력 (${\tau}$) 관계인 Mohr 파괴포락선으로 변환되어야 한다. 이 연구에서는 Hoek-Brown 파괴함수의 Mohr 파괴포락선을 구하는 새로운 방법을 제시하였다. 제시한 방법은 Londe (1988)가 제안한 응력무차원화 변환방법을 기초로 하였다. 검증 예제를 통해 새로 유도된 ${\sigma}-{\tau}$ 관계식이 Bray가 유도한 관계식과 정확히 일치한다는 것이 확인되었다.

Influence of bed joint orientation on interlocking grouted stabilised mud-flyash brick masonry under cyclic compressive loading

  • Nazar, Maqsud E.;Sinha, S.N.
    • Structural Engineering and Mechanics
    • /
    • 제24권5호
    • /
    • pp.585-599
    • /
    • 2006
  • This paper describes a series of laboratory tests carried out to evaluate the influence of bed joint orientation on interlocking grouted stabilised mud-flyash brick masonry under uniaxial cyclic compressive loading. Five cases of loading at $0^{\circ}$, $22.5^{\circ}$, $45^{\circ}$, $67.5^{\circ}$ and $90^{\circ}$ with the bed joints were considered. The brick units and masonry system developed by Prof. S.N. Sinha were used in present investigation. Eighteen specimens of size $500mm{\times}100mm{\times}700mm$ and twenty seven specimens of size $500mm{\times}100mm{\times}500mm$ were tested. The envelope stress-strain curve, common point curve and stability point curve were established for all five cases of loading with respect to bed joints. A general analytical expression is proposed for these curves which fit reasonably well with the experimental data. Also, the stability point curve has been used to define the permissible stress level in the brick masonry.

일반화된 Hoek-Brown 파괴조건식에 내포된 전단강도 근사식 (Approximate Shear Strength Formula Implied in the Generalized Hoek-Brown Failure Criterion)

  • 이연규
    • 터널과지하공간
    • /
    • 제28권5호
    • /
    • pp.426-441
    • /
    • 2018
  • 일반화된 Hoek-Brown (GHB) 파괴조건식은 최근 각종 암반공학적 계산에 활발히 이용되고 있지만 Mohr 파괴포락선이 해석적 수식으로 표시되지 않아 적용범위를 넓히는데 어려움이 있다. 이러한 단점을 극복하기 위해 이 연구에서는 GHB 파괴함수에 내포된 수직응력 - 접선마찰각 관계식을 다항식으로 최적 근사시켜 접선마찰각을 수직응력의 명시적 근사함수로 표시하는 새로운 방법을 제안하였다. 이 수직응력 - 접선마찰각 관계식을 직선 또는 2차 다항식으로 최적 근사시킬 경우 접선마찰각에 대한 해석적 해가 존재한다. 이 해를 전단응력 - 접선마찰각 관계식에 대입하면 GHB 파괴함수의 근사적 Mohr 파괴 포락선을 유도하는 것이 가능하다. 유도한 근사 Mohr 파괴포락선은 GSI 값 전체 범위에서 정해와 매우 근사함이 입증되었다.