• Particle and aerosol research
• /
• v.15 no.4
• /
• pp.149-157
• /
• 2019

Infiltration characteristics of airborne particulate matter had been investigated in real-life for about 90 days over 2 years in a Korean apartment building where a 3-person household had lived and the exclusive private area was 84.9 ㎡. Airtightness was measured by fan depressurization, and the ACH₅₀ was 2.41 times per hour. In and outdoor particle concentrations were measured by optical particle counters. Infiltration factors and filtration efficiencies of the house, which reflect the removal of outdoor particles penetrating building envelope and the deposition inside a building, were obtained from data screened based on an empirical evaluation process. Infiltration factor of fine particles showed a range from about 42% at 0.4 m/s of wind speed to 72% at 4.2 m/s of wind speed with closed windows and doors. Filtration efficiency was like a MERV 13 grade filter with an open window outside at a balcony at low outdoor wind speed under 1 m/s. The grade decreased to MERV 11 by opening another outside window at the other balcony. Filtration efficiencies decreased as much as 29% in average at a range of 0.3~2.5 ㎛.

• The Korean Journal of Mycology
• /
• v.16 no.3
• /
• pp.157-161
• /
• 1988

The vegetative nuclear divisions in hyphae and chromosome numbers were studied with the aid of Giemsa-HCl techniques from 10 strains of Fusarium oxysporum. The entire nuclear division process occurred within an intact nuclear envelope like other fungus. The results confirmed that 2 strains(F. oxysporum S Hongchun D2, F. oxysporum S Jinyang 4) were n=4; 3 strains(F. oxysporum f. sp. lini KFCC 32585, F. oxysporum f. sp. melongenae KFCC 34743 and F. oxysporum f. sp. raphani) n=5; 2 strains(F. oxysporum f. sp. vasinfectum, and F. oxysporum f. sp. mori KFCC 34742) n=6; 3 strains(F. oxysporum f. sp. cucumerium, F. oxysporum f. sp.niveum, and F. oxysporum f. sp. pisi) n=7.

• Clinics in Shoulder and Elbow
• /
• v.20 no.1
• /
• pp.49-56
• /
• 2017

Since the olecranon fractures are caused by relatively low-energy injuries, such as a fall from standing height, they are usually found without comminution. Less commonly they can be developed by high-energy injuries and have severe concomitant comminution or injuries to surrounding structures of the elbow. Because the fracture by nature is intra-articular with the exception of some avulsion-type fracture, a majority of olecranon fractures are usually indicated for surgical treatment. Even if there is minimal displacement, surgical treatment is recommended because there is a possibility of further displacement by the traction force of triceps tendon. The most common type of olecranon fracture is displaced, simple non-comminuted fracture (that is, Mayo type IIA fractures). Although tension band wiring was the most widespread treatment method for these fractures previously, there is some trends toward fixation using locking plates. Primary goal of the surgery is to restore a congruent joint and extensor mechanisms by accurate reduction and stable fixation so that range of motion exercises can be performed. The literature has shown that good clinical outcomes are achieved irrespective of surgical fixation technique. However, since the soft tissue envelope around the elbow is poor and the implants are located at the subcutaneous layer, implant irritation is still the most common complication associated with surgical treatment.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.2
• /
• pp.103-110
• /
• 1997

In the development of large complex assembly, most design changes are from the following reasons.: 1) insufficient consideration of assembling sequence of downstream process. 2) interference and fit-up of related parts. 3) initial design changes which are not completely resolved. In order to reduce the first reason of above, the assembly-centric modeling methodology was proposed in the part (1) of the thesis. In this part (2), a Digital Mock-Up system, which is a tool to build a virtual mock-up in design stage, has been developed in order to prevent the other two reasons. The system can build a virtual assembly in various ways as followings.: 1) assembling parts which are located in user defined envelope. 2) assembling parts with the specified disciplines. 3) assembling parts that are selected in the part list. It can also make an assembly by the combination of above methods. In addition to that, it has the functions to read/write the virtual assembly and to explode parts of the assembly in desired direction. With the virtual assembly, engineers can design interference free parts without making physical mock-up. The system has been implemented with Oracle database management system in CATIA environment.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1639-1642
• /
• 1994

The severe conditions such as rated voltage of 800kV, gas pressure of $5kg/cm^2$ and rated lighting impulse withstand voltage of 2400kV were adopted for the design of spacers in the 800kV GIS to give a sufficient design margin. The design criteria on the maximum electric field strength of the center conductor and the insulator surface were established by considering the insulator surface characteristics, electrode area and surface effects in the unequal electric field strength of the given gap. The design parameters such as inter/outer envelope degree, thickness, inter/outer inserts, triple junction gap were determined by calculating the electric field using FLUX-2D program package and by referring to the published papers. The mechanical stress analysis was conducted on the feasible model spacers that showed good electric field distributions to confirm the sufficient mechanical design margin. The 800kV spacer designed as described above is now in the process of manufacturing.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.18-23
• /
• 1996

Fluctuation statistics of scattering strength are not only important because they impact the performance of active sonar systems, but also because they may provide insight into the major scattering process. In this article, analysis of the statistical characteristics of bottom backscattering, measured in shallow water, are presented. The slowly moving experimental sonar was operated at 30kHz to gather data over the bottom. Spatial and temporal correlation functions of the signal amplitudes were measured. The distribution function and probability of false alarm function of the detected envelope of widebeam and narrowbeam signals were measured. An attempt was made to compare the results with existing theoretical models. The result suggests that the statistical characteristics of bottom backscattering fluctuation of moving source is differ from that of fixed source.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.3
• /
• pp.387-394
• /
• 2012

Fertilization rates were over 90% when sperm from black porgy Acanthopagrus schlegelii acclimated and raised in freshwater and black porgy raised in seawater were fertilized with eggs from female black porgy raised in seawater, although cryopreserved sperm were significantly lower in fertilization rates than non-cryopreserved sperm. From the observations of embryos development at different salinities (0, 10, 20 and 32 psu) within 3 hours upon fertilization (16 cell stage), all were dead at 0 psu. However, the development process and speed at 10 and 20 psu were the same as at 32 psu. But, many developing embryos were egg envelope injury at low-salinities of 10 and 20 psu unlike at 32 psu. This is attributable to osmotic shock. Hatching rate of embryos at 32 psu was 60% or so, whereas low as 5% or less were successfully hatched at 10 and 20 psu, implying that osmotic shock could be responsible for the failure of embryo development.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.2
• /
• pp.73-79
• /
• 2021

Recently there are growing interests on the energy conservation and emission reduction. In the fields of architecture and civil engineering, the energy monitoring of structures is required to response the energy issues. In perspective of thermal monitoring, thermal images gains popularity for their rich visual information. With the rapid development of the drone platform, aerial thermal images acquired using drone can be used to monitor not only a part of structure, but wider coverage. In addition, the stereo photogrammetric process is expected to generate 3D point cloud with thermal information. However thermal images show very poor in resolution with narrow field of view that limit the use of drone-based thermal photogrammety. In the study, we aimed to generate 3D thermal point cloud using visible and thermal images. The visible images show high spatial resolution being able to generate precise and dense point clouds. Then we extract thermal information from thermal images to assign them onto the point clouds by precisely establishing photogrammetric collinearity between the point clouds and thermal images. From the experiment, we successfully generate dense 3D thermal point cloud showing 3D thermal distribution over the building structure.

• Journal of Home Health Care Nursing
• /
• v.28 no.2
• /
• pp.111-123
• /
• 2021

Purpose: This study aimed to present the management strategies necessary to improve the operational efficiency of visiting nurse centers and evaluate their effectiveness. Methods: The subjects of this study were visiting nurse centers registered as long-term care centers. Based on value chain analysis, cost information analysis, and data envelope analysis, the study was carried out according to the Magerison's management consulting procedure, for six months. This procedure comprised eight sub-steps of approach and application. Results: The following management strategies were agreed upon: establishment of a cooperative network with other visiting care centers, creation of high satisfaction of external customers by providing practical training to care workers, and making rehabilitation and exercise services as the core nursing activities to be focused on. Conclusion: The management consulting process and analysis method applied in this study can referred to as a useful methodological framework for revitalizing visiting nursing centers in the future.