• Clinics in Shoulder and Elbow
• /
• 제18권1호
• /
• pp.47-51
• /
• 2015

Iatrogenic damage of the rotator cuff followed by postoperative shoulder function loss is a potential complication after antegrade intramedullary nailing (AIN) for a humeral fracture. The authors present a case of arthroscopic rotator cuff repair and subacromial decompression of a non-healed rotator cuff tendon (mainly supraspinatus) and secondary impingement syndrome caused either by the tear or a proud nail after AIN for a mid-shaft humeral fracture. At presentation, the patient complained of right shoulder pain and 'snapping', especially during forward elevation and abduction of the shoulder, of 4 years duration. Right shoulder pain started sometime after pain due to the humeral shaft fracture, operation had subsided, and persisted after nail removal. Arthroscopic findings showed a longitudinal rotator cuff tear at the nail entry point that had not healed and severe fibrous hypertrophy on the acromion underspace, which is a unique finding since most longitudinal splits of tendon fibers are more likely to heal than conventional rotator cuff tears detached from bone. The torn rotator cuff was repaired after debridement and placing side-to-side sutures. At his 34-month follow-up after rotator cuff repair, the patient showed complete recovery and had excellent clinical scores.

• 한국도로학회논문집
• /
• 제14권3호
• /
• pp.173-182
• /
• 2012

휴게소 진 출입부는 설계속도 등이 급변하는 구간으로 교통안전 취약구간이며 특히, 휴게소 진입부는 감속과 주차공간 검색 두 가지 작업이 동시에 수행되므로 이용차량의 안전성을 확보할 수 있는 설계기준이 필요하다. 국내의 경우 영업소나 나들목, 분기점 같은 출입시설에 대한 기하구조 기준은 수립되어 있는 반면, 도로의 부속시설인 휴게소에 대한 상세한 기하구조 기준은 없는 실정이다. 이에 본 연구에서는 일반형 휴게소 135개소를 대상으로 한 현장조사 및 사고조사 자료를 활용하여 휴게소진 출입부 기하구조에 대한 문제점을 도출하였다. 휴게소 진 출입부의 설계구간을 분류하고 각 구간에 대한 설계요소를 도출한 후, 휴게소 진 출입부를 대상으로 속도조사 및 차량주행행태 조사를 수행하고 분석을 통해 설계요소별 최소 기준을 도출하였다. 진입 연결로의 시/종점 속도에 따라 감속거리 산정식을 이용하여 진입 연결로의 최소길이는 40m를 제안하였고, 주행행태를 기반으로 선형 안전성 평가를 통해 접속 설치각은 12~$17^{\circ}$를 제안하였다. 개발된 휴게소 진입부 설계기준은 신설되는 휴게소 뿐만 아니라 기존 휴게소에 대해 현실적으로 적용 가능한 개선방안을 제시할 수 있을 것으로 판단된다.

• 소성∙가공
• /
• 제10권2호
• /
• pp.130-136
• /
• 2001

The mathematical set-up model was developed to reduce the mechanical property deviation in annealed and slightly rolled steel strip. The mechanical peculiarities of skin pass rolling process, such as high friction value and non-circular contact arc, low reduction and non-negligible entry and exit elastic zones as well as central restricted deformation zone are all taken into account. The deformation of work rolls is calculated with the influence function method and arbitrary contact arc shape is permitted. The strip deformation is modeled by slab method and the entry and exit elastic deformation zones are included. The strip restricted deformation zone near the neutral point is also considered. It was revealed that the new model has better accuracy than present regression model by statistical analysis with actual mill rolling data.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.317-317
• /
• 2000

The mathematical set-up model was developed to reduce the mechanical property deviation in annealed and slightly rolled steel strip. The mechanical peculiarities of temper rolling process, such as high friction value and non-circular contact arc, Low reduction and non-negligible entry and exit elastic zones as well as central restricted deformation zone are all taken into account. The deformation of work rolls is calculated with the influence function method and arbitrary contact arc shape is permitted. The strip deformation is modeled by slab method and the entry and exit elastic deformation zones are included. The restricted deformation Bone near the neutral point is also considered. It was revealed that the new model has better accuracy than present regression model by statistical analysis with actual mill rolling data.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.293-300
• /
• 1999

A mathematical model for the analysis of roll gap phenomena in strip temper rolling process is described. The mechanical peculiarities of temper rolling process, such as high friction value and non-circular contact arc, low reduction and non-negligible entry and exit elastic zones as well as central restricted deformation (preliminary displacement or sticking) zone etc., are all taken into account. The deformation of work rolls is calculated with the influence function method and arbitrary contact arc shape is permitted. The strip deformation is modeled by slab method and the entry and exit elastic deformation zones are included. The restricted deformation zone near the neutral point is also considered. The concept and the calculation method of limiting preliminary displacement are used to determine the length of the central restricted deformation zone. The comparison of the model results with the measured mill data is also made.

• Journal of Korean Neurosurgical Society
• /
• 제52권4호
• /
• pp.384-390
• /
• 2012

Objective : The objective of this study was to investigate the morphologic characteristics between the vertebral body and the regions of the cervical and thoracic spinal cords where each rootlets branch out. Methods : Sixteen adult cadavers (12 males and 4 females) with a mean age of 57.9 (range of 33 to 70 years old) were used in this study. The anatomical relationship between the exit points of the nerve roots from the posterior root entry zone at each spinal cord segment and their corresponding relevant vertebral bodies were also analyzed. Results : Vertical span of the posterior root entry zone between the upper and lower rootlet originating from each spinal segment ranged from 10-12 mm. The lengths of the rootlets from their point of origin at the spinal cord to their entrance into the intervertebral foramen were 5.9 mm at the third cervical nerve root and increased to 14.5 mm at the eighth cervical nerve root. At the lower segments of the nerve roots (T3 to T12), the posterior root entry zone of the relevant nerve roots had a corresponding anatomical relationship with the vertebral body that is two segments above. The posterior root entry zones of the sixth (94%) and seventh (81%) cervical nerve roots were located at a vertebral body a segment above from relevant segment. Conclusion : Through these investigations, a more accurate diagnosis, the establishment of a better therapeutic plan, and a decrease in surgical complications can be expected when pathologic lesions occur in the spinal cord or vertebral body.

• Asian Journal of Innovation and Policy
• /
• 제10권2호
• /
• pp.195-211
• /
• 2021

This paper measures the economic impacts of the U.S. port investment strategies coping with the Panama Canal expansion. Using secondary import data, negative and positive estimates of the impacts were presented in this study. Reduced port activities into the West Coast Customs Districts negatively affect transportation and warehousing industries, among other effects. Still, they have simultaneous positive effects in other states from increased imports resulting from modal shifts and changes in the entry port located in the South and East coasts. This study applied the supply-driven National Interstate Economic Model that measures all interstate trade among the U.S. states to divert foreign imports from 15 Pacific Rim countries. For this purpose, the following assumption was adopted: larger ships using the canal will lead to a redirection of seaborne trade among U.S. (and other) ports and result in secondary effects, e.g., using different freight modes and regional growth spillovers. This study also accounted for the entry point change and significant port investments for foreign trade under alternative scenarios. The choice of ports for international trade depends on decisions about how to minimize multimodal delivery costs. The total direct reduction of transportation and warehousing activities associated with foreign imports in the West Coast ports was estimated at $3.3 billion, leading to total negative effects of $5.8 billion. Total positive impacts from the shift of transportation modes with the choice of an entry port and new warehousing activities for foreign imports in the selected 12 states varied. As expected, states that involved an entry port had the most prominent benefits, but Texas, New York, and New Jersey may be benefited through all the port enhancement projects in the U.S. Also, except for Transportation and Postal, and Warehousing industries, Construction is another dominant positive affected industry of the Canal expansion in the U.S.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2006년도 ISMP 2006
• /
• pp.37-45
• /
• 2006

The mobile-phone which Camera was put on was released at the end of 2000 and dramatically puts up the deployment ratio because not only simple Camera but also a function that the photograph which I took is dispatched was added. It is the force that demand in this year presses 600,000,000 sale of a mobile-phone is estimated to be 960,000,000 of them in 2006, and to be able to include two errands with a support model after 3G. A person of entry to a camera-module appear much. In addition, the various kinds of products open markedly which a product comes to be known widely in the world, and the application range has opened widely, and considered QCDT come to be key issues for answer to market demand. By manufacturing industry, there is peculiar culture to each industry, camera-module is the composition the various industries. The construction of true Supply-chain becomes unavoidable to make a good product. I describe the point that the situation of each supply-chain and the direction for the future by the view point of module assembly maker.

• Archives of Reconstructive Microsurgery
• /
• 제16권1호
• /
• pp.1-5
• /
• 2007

The purpose of this article to evaluate the availability of the rectus femoris flap in Korean subjects. Material and Methods is that Cadaveric dissections were done on 51 femoral triangles of 26 cadevers. We measured the length of the direct head of rectus femoris from anterior superior iliac spine to patella upper pole, ASIS to lateral border of femoral nerve, and entry point of femoral nerve and vessel branches to rectus. Usually, there were three terminal branches to rectus femoris from the femoral nerve. The entry point of the first branch was at the proximal $17.5{\sim}31.4%$ portion of the rectus femoris. The second and the third branch entered at the proximal $22.5{\sim}40.7%$ and $26.3{\sim}42.3%$, respectively. The vessel entry was at $20.2{\sim}37.3%$. The length from ASIS to femoral nerve was $3.5{\sim}8.5\;cm$. Among the 51 rectus femoris muscles, 44 had one nutrient artery, and 7 had 2 nutrient arteries. The nutrient artery originated from the descending branch of the lateral femoral circumflex artery in 18(40.9%) cases, directly from the lateral femoral circumflex artery in 8(18.0%) cases, and from proximal(6 cases, 13.6%) and distal(12 cases, 27.3%) portion of the deep femoral artery. The average length of the nutrient artery was 29.8 mm and the width was 2.14 mm. The point where it meets the main feeding artery of the rectus femoris was $9.0{\sim}15.0\;cm$ from the ASIS. In all cases, the main artery's entrance was proximal to the first nerve branch. Conclusion is that rectus femoris has available data for functional flap.

• Journal of Korean Neurosurgical Society
• /
• 제30권9호
• /
• pp.1094-1102
• /
• 2001

Objective : During the trans-condylar or trans-jugular approach for the lesion of cranio-cervical junction(CCJ), its necessary to identify the accurate locations of vertebral artery(VA), internal jugular vein(IJV) and its related lower cranial nerves. These neurovascular structures can also be damaged during the operation for vascular tumor or traumatic aneurysm around extra-jugular foramen, because of their changed locations. To reduce the neurovascular injury at the operation for CCJ, morphometric relationship of its surrounding neurovascular structures based on the tip of the transverse process of atlas(C1 TP), were studied. Materials & Methods : Using 10 adult formalin fixed cadavers, tip of mastoid process(MT) and TPs of atlas and axis were exposed bilaterally after removal of occipital and posterior neck muscles. Using standard caliper, the distances were measured from the C1 TP to the following structures : 1) exit point of VA from C1 transverse foramen, 2) branching point of muscular artery from VA, 3) entry point of VA into posterior atlanto-occipital membrane(AOM), 4) branching point of C-1 nerve. In addition, the distances were measured from the mid-portion of the posterior arch of atlas to the entry point of the VA into AOM and to the exit point of the VA from C1 transverse foramen. After removal of the ventrolateral neck muscles, neurovascular structures were exposed in the extra-jugular foraminal region. Distances were then measured from the C1 TP to the following structures : 1) just extra-jugular foraminal IJV and lower cranial nerves, 2) MT and branching point of facial nerve in parotid gland. In addition, distance between MT and branching point of facial nerve was measured. Results : The VA was located at the mean distance of 12mm(range, 10.5-14mm) from the C1 transverse foramen and entered into the AOM at the mean distance of 24mm(range, 22.8-24.4mm) from the C1 TP. The mean distance from the mid portion of the C1 posterior arch was 20.6mm(range, 19.1-22.3mm) to the entry point of the VA into AOM and 38.4mm(range, 34-42.4mm) to the exit point of the VA from C1 transverse foramen. Muscular artery branched away from the posterior aspect of the transverse portion of VA below the occipital condyle at the mean distance of 22.3mm(range, 15.3-27.5mm) from the C1 TP. The C-1 nerve was identified in all specimens and ran downward through the ventroinferior surface of the transverse segment of VA and branched at the mean distance of 20mm(range, 17.7-20.3mm) from the C1 TP. The IJV was located at the mean distance of 6.7mm(range, 1-13.4mm) ventromedially from the lateral surface of the C1 TP. The XI cranial nerve ran downward on the lateral surface of the IJV at the mean distance of 5mm(range, 3-7.5mm) from the C1 TP. Both IX and X cranial nerves were located in the soft tissue between the medial aspect of the internal carotid artery(ICA) and the medial aspect of the IJV at the mean distance of 15.3mm(range, 13-24mm) and 13.7mm(range, 11-15.4mm) from the C1 TP, respectively. The IX cranial nerve ran downward ventroinferiorly crossing the lateral aspect of the ICA. The X cranial nerve ran downward posteroinferior to the IX cranial nerve and descended posterior to the ICA. The XII cranial nerve was located between the posteroinferior aspect of the IX cranial nerve and the posterior aspect of the ICA at the mean distance of 13.3mm(range, 9-15mm) ventromedially from the C1 TP. The distance between MT and C1 TP was 17.4mm(range, 12.5-23.9mm). The VII cranial nerve branched at the mean distance of 10.2mm(range, 6.8-15.3mm) ventromedially from the MT and at the mean distance of 17.3mm(range, 13-21mm) anterosuperiorly from the C1 TP. Conclusion : This study facilitates an understanding of the microsurgical anatomy of CCJ and may help to reduce the neurovascular injury at the surgery around CCJ.