• The Research Journal of the Costume Culture
• /
• v.15 no.5
• /
• pp.737-748
• /
• 2007

Korea is now entering into aging society next to Japan in Asia, which is considered as unusual in the semi-developed countries. More than 50 year-old consumer market is anticipated to grow to 28.7% of the total in 2010 from 20.4% in 2000. In particular, the silver market is estimated to be formed in full range in 2010 when the generation born in 50s and 60s after the Korean War start to retire. In this study, body shapes are classified as standard, obese, and tiny according to the previous studies based on the body shape characteristics and the body measurement of the Elderly Women. Based on the classification, we developed pattern of the panty for the obese Elderly Women to provide basic materials for the quality enhancement of the clothing of the increasing Elderly Women. The followings are the result of the study 1. To categorize the body shapes of the Elderly Women focusing on the lower half, we grouped the target subjects using the nested approach by the average standard deviation and the factor analysis minimal diffusion method. Accordingly, type 1 and 2 had 36 members respectively and type 3 had 43 members. In this study, two Elderly Women subjects with standard body shape falling under the type 1 were selected as the subjects. 2. In the second trial evaluation for the panty pattern for the Elderly Women 32 items for appearance test and 3 items for functional test were evaluated. The scores in leg, sideline and hip were shown high and the balance between the parts was maintained very well. In the functional test, the panty used to be too tight for the leg curve but in the second trial it was improved, too. In each item, the second trial test showed better score than the first trial test. Conclusively, the most optimal panty prototype for the Elderly Women was proposed according to the trial test result.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.9
• /
• pp.116-121
• /
• 2020

In recent times, fuel economy enhancement and environmental regulation compliance have become the main topics of interest in the automobile industry. Electric vehicles are desirable alternatives to the existing cars that employ internal combustion engines. Specifically, electric vehicles are equipped with inverters, motors, and a gearbox instead of engines and transmission mechanisms. The gearbox is a key component, used to transmit power from the electric motor to the wheel. Therefore, the design of the gearbox is critical. However, most engineers design gears based only on their experience because no standards pertaining to the design factor exist, other than those for the gear ratios. To overcome this problem, the structural stabilities must be examined considering the design factors of the gears. In this study, we considered the module and number of teeth as the main factors. The constraints corresponded to the final gear ratio and fixed distance between each axle of the shafts. Moreover, a structural analysis was conducted, and the variation trend of the maximum equivalent stress against changes in the gear module and number of teeth was examined. By performing such an analysis, the structural stability in the design of a gear system could be effectively investigated.

• Journal of the Korean School Mathematics Society
• /
• v.17 no.1
• /
• pp.1-21
• /
• 2014

This research aims to analyze the process of selecting, maintaining, and changing the method of learning mathematics by middle school students from the perspective of self-regulated learning ability, in order to help students to select a rational method of studying. For this purpose, we defined 'assisted-learning' as all kinds of education that education demanders receive to supplement their regular school studies. As results of the research, it was found as follows. First, the students with high self-regulated learning ability selected, maintained, and changed their assisted-learning based on their concrete decision and rational reasons regarding the effect of their learning process and assisted-learning to themselves. Second, the students with high self-regulated learning ability had tendency to be very active participation in class than the students with low ability. Third, the students with high self-regulated learning ability felt the effect of assisted-learning on their learning mathematics, and felt the enhancement of their interest and confidence. Also, it is notable that the students selected 'their own willingness to study' as a major factor for the success of assisted-learning.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.2
• /
• pp.125-137
• /
• 2013

This study investigated the conceptual constructs of ethical consumption beliefs and their impacts on the consumer attitudes toward eco-friendly faux leather apparel goods. The mediating roles of perceived consumer effectiveness and apparel environmental knowledge were examined in this research. A survey was conducted on female consumers between the ages of 20 and 50; subsequently, 300 responses were analyzed. The results of this study were follows: 1) The results of factor analysis and the reliability test on ethical consumption beliefs clearly showed factorial structures that include Social Responsibility, Eco-friendly Consumption, Animal Welfare, and Individual Enhancement. 2) The results of the mean scores of ethical consumption beliefs showed that respondents tended to consider Social Responsibility more important than the other three factors. Ethical consumption beliefs showed a significantly positive influence on consumer attitudes toward eco-friendly faux leather apparel products; in addition, Social Responsibility had the highest effect on product attitudes among the four factors of ethical consumption beliefs. 3) The perceived consumer effectiveness and environmental knowledge of apparel had important medicating roles in the relation-ship between ethical consumption beliefs and attitudes towards eco-friendly faux leather apparel products. This study highlighted a potential marketability of eco-friendly faux leather apparel products and that ethical consumption beliefs, perceived consumer effectiveness, and apparel environmental knowledge should be promoted among consumers to increase favorable attitudes towards these products.

• Biomolecules & Therapeutics
• /
• v.13 no.3
• /
• pp.174-180
• /
• 2005

Antigen presenting cells (APCs), dendritic cells (DCs) and macrophages, playa critical role not only in the initiation of immune responses, but also in the induction of immune tolerance. In an effort to regulate immune responses through the modulation of APC function, we searched for and characterized APC function modulators from natural products. Bifidobacterium pseudocatenulatum SPM1204 (SPM1204) isolated from feces of healthy Korean in the age of 20s was used in this experiment. DCs and macrophages were cultured in the presence of supernatants of SPM 1204 and then examined for their activities for the presentation exogenous antigen in association with major histocompatibility complexes (MHC) and macrophage activation. SPM1204 increased class I MHC-restricted presentation of exogenous antigen (cross-presentation) in a DC cell line, DC2.4 cells. The RAW 264.7 cell line was used to test the nonspecific effect of immune reinforcement of SPM1204 as a source of biological regulating modulator for the macrophage activation, include nitric oxide (NO) production and cytokine production. Results showed that the production of NO, tumor necrosis factor (TNF)-$\alpha$, interleukin 1 (IL-1)-$\beta$ and morphological changes in macrophages were largely affected by SPM1204 in a dose-dependent manner. Our results demonstrated that SPM1204 promote cross-presentation of dendritic cells as well as the induction of NO, TNF-$\alpha$ production, and activation of macrophage.

• Journal of radiological science and technology
• /
• v.22 no.1
• /
• pp.5-11
• /
• 1999

This paper reviews recent major activities on instrumentation and methodology of PET. The performance of the PET instrumentation can be expressed by four physical characteristics, 1) spatial resolution, 2) coincidence resolving time, 3) energy resolution, and 4) detection efficiency. The physical and technical aspects of PET systems are briefly discussed along with these characteristics. Toward high resolution PET the recent trend has been to design multiple rings of densely packed detector arrays with scintillators. In order to satisfy the sampling requirement in reconstruction, continuous detector units has been developed. Iterative image reconstruction algorithms have received considerable attention for improvement of both the sampling requirement and image quality toward the stationary PET. Better resolving time improves the maximum true coincidence rate, which is also increased with more detectors placed in coincidence with each other. It suggests that volume PET is promising for enhancement of detection efficiency. The scattered coincidence event rate may be reduced by using detectors with better energy resolution. The use of interplane septa, however, takes over improvement of energy resolution in 2D PET. Energy resolution becomes an important factor for image quality under the condition of septa removal such as volume PET. Toward full utilization of emitting photons, 3D reconstruction incorporating oblique rays has been studied, and volume reconstruction algorithms have been developed. Practical volume PET systems impose heavy burden not only to detector sets and coincidence circuits, but also to computers in the memory requirements and the data processing. In conclusion, there have been many ingenious methods in development of PET instrumentation, which are based on unique capability of PET. They will be expected to overcome technical limitations, and to approach the fundamental limits.

• Journal of the Korean Society of School Health
• /
• v.3 no.2
• /
• pp.63-87
• /
• 1990

The purpose of this study was to investigate the performance rate of regular health instruction by school nurses and its related factors. These data were collected by questionnaire in Mar. 1990. Total 986 school nurses who have been working primary, secondary schools in Seoul were given the questionnaire, and 672 school nurses' respectively, were finally analyzed. Analysis of the data was done utilizing SPSS/PC+for percentage, frequency, mean, $X^2$-test, t-test, ANOVA, correlation, regression. The major findings of this study were as follows : 1. Thc performance rate of regular health instruction by school nurses was 77.7% of 552 respondents. 2. The school nurses in primary school(87.0%) were more likely to perform regular health instruction than the school nurses in secondary school (63.8%). 3. The teachers of regular health instruction were more likely to display favorable attitudes toward need of health instruction. The school level was not statistically significant(P>0.05). 4. The evidence from the data analysis supported the proposition that the teachers of regular health instruction had more positive attitude toward the establishment of health subject(80.3%). The school level was statistically significant(P<0.05). 5. The school principal was a highly significant factor as it affected the performance rate of regular health instruction by school nurses. The school level was statistically significant(P<0.001). 6. The length of past career, the degree of self confidence on health instruction, the need of health instruction did affect the performance rate of regular health instruction by school nurses. On the basis of the above mentioned, so as for regular health instruction of school to be activated more throughly, regular class must be introduced in the form of establishment of health subject, enhancement of quality on the part of school nurses, made and various methods for enhancing perception toward the regular health instruction on the part of school principal are to be carried out.

• Journal of Environmental Science International
• /
• v.27 no.8
• /
• pp.621-629
• /
• 2018

Many chemically active species such as ${\cdot}H$, ${\cdot}OH$, $O_3$, $H_2O_2$, hydrated $e^-$, as well as ultraviolet rays, are produced by Dielectric Barrier Discharge (DBD) plasma in water and are widely use to remove non-biodegradable materials and deactivate microorganisms. As the plasma gas containing chemically active species that is generated from the plasma reaction has a short lifetime and low solubility in water, increasing the dissolution rate of this gas is an important challenge. To this end, the plasma gas and water within reactor were mixed using the air-automizing nozzle, and then, water-gas mixture was injected into water. The dissolving effect of plasma gas was indirectly confirmed by measuring the RNO (N-Dimethyl-4-nitrosoaniline, indicator of the formation of OH radical) solution. The plasma system consisted of an oxygen generator, a high-voltage power supply, a plasma generator and a liquid-gas mixing reactor. Experiments were conducted to examine the effects of location of air-automizing nozzle, flow rate of plasma gas, water circulation rate, and high-voltage on RNO degradation. The experimental results showed that the RNO removal efficiency of the air-automizing nozzle is 29.8% higher than the conventional diffuser. The nozzle position from water surface was not considered to be a major factor in the design and operation of the plasma reactor. The plasma gas flow rate and water circulation rate with the highest RNO removal rate were 3.5 L/min and 1.5 L/min, respectively. The ratio of the plasma gas flow rate to the water circulation rate for obtaining an RNO removal rate of over 95% was 1.67 ~ 4.00.

• Annual Conference of KIPS
• /
• 2017.04a
• /
• pp.315-318
• /
• 2017

Nowadays, Distributed Denial of Service (DDoS) attacks have gained increasing popularity and have been a major factor in a number of massive cyber-attacks. It could easily exhaust the computing and communicating resources of a victim within a short period of time. Therefore, we have to find the method to detect and prevent the DDoS attack. Recently, there have been some researches that provide the methods to resolve above problem, but it still gets some limitations such as low performance of detecting and preventing, scope of method, most of them just use on cloud server instead of network, and the reliability in the network. In this paper, we propose solutions for (1) handling multiple DDoS attacks from multiple IP address and (2) handling the suspicious attacks in the network. For the first solution, we assume that there are multiple attacks from many sources at a times, it should be handled to avoid the conflict when we setup the preventing rule to switches. In the other, there are many attacks traffic with the low volume and same destination address. Although the traffic at each node is not much, the traffic at the destination is much more. So it is hard to detect that suspicious traffic with the sampling based method at each node, our method reroute the traffic to another server and make the analysis to check it deeply.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.616-624
• /
• 2011

The flow characteristics and heat transfer augment on the periodically arranged semi-circular ribs in a rectangular channel for turbulent flow has been investigated numerically. The aspect ratio of the rectangular channel was AR=5, the rib height to hydraulic diameter ratio were 0.07 and rib height to channel height ratio was set as e/H=0.117 for various PR(rib pitch-to-rib height rate) between 8~14, respectively. The SST k-${\omega}$ turbulence model and v2-f turbulence model were used to find out the heat transfer and the flow characteristics of near the wall which are suited to obtain realistic phenomena. The numerical analysis results show turbulent flow characteristics, heat transfer enhancement and friction factor as observed experimentally. The results predict that turbulent kinetic energy(k) is closely relative to the diffusion of recirculation flow. and v2-f turbulence model simulation results have a good agreement with experimental values.