• 제목/요약/키워드: engineers

검색결과 192,345건 처리시간 0.155초

고성능 리튬-황 전지를 위한 금속산화물을 첨가한 탄소나노튜브 프리스탠딩 전극 (Metal Oxides Decorated Carbon Nanotube Freestanding Electrodes for High Performance of Lithium-sulfur Batteries)

  • 신윤정;정현서;김은미;김태윤;정상문
    • Korean Chemical Engineering Research
    • /
    • 제61권3호
    • /
    • pp.426-438
    • /
    • 2023
  • 차세대 전지로 주목받는 리튬-황 전지는 높은 에너지 밀도를 갖는 반면, 황의 절연 특성, 셔틀 현상 그리고 부피팽창으로 인하여 상용화에 어려움이 있다. 본 연구에서는 경제적이고 간단한 진공여과 방법으로 바인더와 집전체가 없는 프리스탠딩 전극을 제조하였고 탄소나노튜브(CNT)를 황의 전기전도도 향상을 위하여 사용하였다. 여기서 CNT는 집전체와 도전재 역할을 동시에 수행하였다. 추가로 리튬폴리설파이드의 흡착에 용이한 금속산화물(MOx, M=Ni, Mg)을 CNT/S 전극에 첨가함으로써 리튬-황 전지의 셔틀반응을 억제하였다. MOx@CNT/S 전극은 금속산화물을 도입하지 않은 CNT/S 전극에 비해 높은 용량 특성과 사이클 안정성을 나타내었으며, 이는 금속산화물의 우수한 리튬폴리설파이드 흡착 특성으로 인하여 황 활물질의 손실을 억제한 결과이다. MOx@CNT/S 전극 중에서 NiO를 도입한 NiO@CNT/S 전극은 1 C에서 780 mAh g-1의 높은 방전용량을 나타내었고 200 사이클 후 134 mAh g-1으로 극심한 용량 감소가 나타났다. MgO@CNT/S 전극은 비록 초기 사이클에 544 mAh g-1의 낮은 방전용량을 나타냈지만, 200 사이클까지 용량을 90% 유지하는 우수한 사이클 안정성을 나타내었다. 고용량과 사이클 안정성 확보를 위하여 Ni:Mg를 0.7:0.3의 비율로 혼합한 Ni0.7Mg0.3O@CNT/S 전극은 755 mAh g-1 (1 C)의 초기 방전용량과 200 사이클 후에도 90% 이상의 용량 유지율을 나타내었다. 따라서 이원 금속산화물의 CNT/S 프리스탠딩으로의 적용은 고용량 특성뿐만 아니라 가장 큰 문제인 리튬폴리설파이드의 용출을 효과적으로 개선하여 경제적이고 고성능 리튬-황 전지의 개발이 가능함을 시사한다.

납사분해 공정 내 열 교환 네트워크 경제적-환경영향 평가 (Evaluation of Economic-Environmental Impact of Heat Exchanger Network in Naphtha Cracking Center)

  • 정효진;정수빈;안유찬
    • Korean Chemical Engineering Research
    • /
    • 제61권3호
    • /
    • pp.378-387
    • /
    • 2023
  • 석유화학은 전체 산업에너지 소비량 중 약 30%를 소비하는 에너지 다소비 업종으로써 대표적인 이산화탄소(carbon dioxide, CO2) 배출원이다. 그 중 에틸렌, 프로필렌, 프로판 및 혼합 C4를 생산하는 납사 분해 공정(naphtha cracking center, NCC)은 많은 양의 에너지를 소비하고 상당한 양의 CO2를 배출한다. 이러한 이유로 경제성과 환경적 측면에서의 효율성을 보장하기 위해 에너지 사용량 및 환경 영향 인자 감소를 목표로 하는 통합 기술경제적-환경영향 평가가 필요하다. 본 연구는 핀치분석에 근거하여 기존 NCC에서 사용되는 열 교환망의 효율성을 분석하고 이를 통해 에너지 사용량을 감축 시킬 수 있는 개선안을 선정하는 것을 목표로 한다. 공정 내 유틸리티 소비량을 줄이기 위하여 고온 스트림과 저온 스트림 사이를 고려한 최적의 열 교환망을 도출하고, 유틸리티 사용량 감소와 열교환기 설치 비용 증가 사이의 트레이드 오프를 고려하여 경제성 평가를 진행하였다. 또한, 환경적 측면을 고려하여 감소된 CO2 배출에 대한 환경영향평가를 실시하였고, 경제적-환경 영향 평가는 투자된 자금을 회수하는 회수기간을 사용하여 실제 공정을 바탕으로 적용 가능성이 있는 에너지 절감안을 도출하였다. 경제적-환경영향평가를 고려한 결과 경제성만을 고려한 부분에서는 각 사례별로 4.29개월, 3.21개월, 3.39개월로 나타났고, 경제적-환경 통합 평가의 경우에는 각 사 례별로 4.24개월, 3.17개월, 3.35개월로 각각의 회수기간을 보였다. 이러한 결과는 환경영향평가를 포함하지 않았을 때와 포함하였을 때 모두 동등하게 나타났다. 추가로 주요한 요소가 회수기간에 어느정도 영향을 미치는지 확인하기 위해 각 사례별 민감도 분석을 진행하였다. 민감도 분석결과 열 교환기 비용이 전체적인 비용에 영향을 미치는 주요 원인으로 확인되었다.

공작기계의 4차 산업혁명에서 특수한 형상 포켓 곡면가공을 위한 초정밀 소형 앵글 스핀들 개발에 관한 연구 (A Study on the Development of Ultra-precision Small Angle Spindle for Curved Processing of Special Shape Pocket in the Fourth Industrial Revolution of Machine Tools)

  • 이지웅
    • 실천공학교육논문지
    • /
    • 제15권1호
    • /
    • pp.119-126
    • /
    • 2023
  • 오늘날 자동차의 연비 향상 과 동적 거동 향상을 위해서 자동차 부품의 경량화 및 간소화 시대가 형성되고 있다. 설계와 제작의 간소화를 위해 제품 형상을 다양한 부품의 일체화로 진행되고 있다. 예를 들어 3개의 제품을 1개의 제품화 시키기 위해서 아주 협소한 부분까지 제품 가공하는 일이 발생되고 있다. 기존의 부품의 경우 가공의 편의성을 위해 정밀 다이캐스팅 또는 주물 생산으로 가공 후 조립하는데 다중 조립체(multi-piece) 방식은 공정수가 많이 필요로 하며, 부품의 정밀도와 강도를 저하시키는 요인이 된다. 가공 공정을 단순화 시키고 부품의 강도를 확보하기 위해서 일체형으로 제작하는 것이 단점을 극복하는데 매우 유리하지만 깊고 좁은 포켓 부분을 가공 할 경우 장비 자체 스핀들로는 가공이 불가능하다. 문제점을 해결하고자 절삭가공에 대한 연구가 활발하게 진행되고 있으며, 다축 복합가공 기술은 이러한 문제점을 해결할 뿐만 아니라, 지금까지 하나의 공작기계로 여러 공정에 따른 유연한 절삭가공이 어려웠던 복합 형상에도 절삭가공이 가능하다는 등 많은 장점을 가지고 있다. 하지만 고가의 장비로 인하여 제조경비 상승과 기계를 운영할 수 있는 기술자가 부족한 것이 현실이다. 5축 절삭 가공기에서는 깊고 협소한 구간의 제품을 생산할 때 공구의 간접으로 제품 생산에 사이클 타임이 늘어남은 물론 가공상에 문제점들이 많이 발생된다. 따라서 전용 공작기계 및 다축 복합가공기를 사용해야 한다. 그 대안으로 3축 머시닝센터에서 5축 이상의 다축 복합가공을 할 수 있는 특수 공구로서의 앵글 스핀들(angle spinde)이 사용될 수 있다. 앵글 스핀들 사용함으로 가공 진동 흡수, 낮은 열 발생과 작동 안정성, 우수한 치수 안정성, 강도 확보와 같은 분야에서 다양하고 지속적인 연구가 필요하다.

StyleGAN Encoder를 활용한 표정 이미지 생성에서의 연령 왜곡 감소에 대한 연구 (A study on age distortion reduction in facial expression image generation using StyleGAN Encoder)

  • 이희열;이승호
    • 전기전자학회논문지
    • /
    • 제27권4호
    • /
    • pp.464-471
    • /
    • 2023
  • 본 논문에서는 StyleGAN Encoder를 활용한 표정 이미지 생성에서의 연령 왜곡을 감소시키는 방법을 제안한다. 표정 이미지 생성 과정은 StyleGAN Encoder를 사용하여 얼굴 이미지를 생성하고, SVM을 이용하여 학습된 boundary를 잠재 벡터에 적용하여 표정을 변화시킨다. 그러나 웃는 표정의 boundary를 학습할 때 표정 변화에 따른 연령 왜곡이 발생한다. 웃는 표정에 대한 SVM 학습에서 생성된 smile boundary는 표정 변화로 인해 생긴 주름이 학습 요소로 포함되어 있으며 연령에 대한 특성도 함께 학습된 것으로 판단한다. 이를 해결하기 위해, 제안된 방법에서는 smile boundary와 age boundary의 상관계수를 계산하고, 이를 이용하여 smile boundary에서 age boundary를 상관계수에 비례하여 조절하는 방식을 도입한다. 제안된 방법의 효과를 확인하기 위해 공개된 표준 얼굴 데이터셋인 FFHQ 데이터셋을 사용하고 FID score를 측정하여 실험한 결과는 다음과 같다. Smile 이미지에서는 기존 방법에 비하여, Ground Truth와 제안된 방법으로 생성된 smile 이미지의 FID score가 약 0.46 향상되었다. 또한, Smile 이미지에서 기존 방법에 비하여, StyleGAN Encoder로 생성된 이미지와 제안된 방법으로 생성된 smile 이미지의 FID score가 약 1.031 향상되었다. Non-smile 이미지에서는 기존 방법에 비하여, Ground Truth와 본 논문에서 제안된 방법으로 생성된 non-smile 이미지의 FID score가 약 2.25 향상되었다. 또한, Non-smile 이미지에서 기존 방법에 비하여, StyleGAN Encoder로 생성된 이미지와 제안된 방법으로 생성된 non-smile 이미지의 FID score가 약 약 1.908 향상됨을 확인하였다. 한편, 각 생성된 표정 이미지의 연령을 추정하여 StyleGAN Encoder로 생성된 이미지의 추정된 연령과 MSE를 측정한 결과, 기존방법 대비 제안하는 방법이 smile 이미지에서 약 1.5, non-smile 이미지에서 약 1.63의 성능 향상되어 제안한 방법에 대한 성능의 효율성이 입증되었다.

3-메틸아미노프로필아민과 N-메틸-2-피롤리돈을 포함한 저수계 흡수제의 CO2 포집 특성 (Absorption Characteristics of Water-Lean Solvent Composed of 3-(Methylamino)propylamine and N-Methyl-2-Pyrrolidone for CO2 Capture)

  • 왕슈아이;홍정현;유정균;홍연기
    • Korean Chemical Engineering Research
    • /
    • 제61권4호
    • /
    • pp.555-560
    • /
    • 2023
  • 기존 아민 수용액 기반 CO2 포집 공정을 산업적으로 적용할 경우 CO2 탈거 및 용매 재생에 따른 재생 에너지가 크다는 문제점을 갖고 있다. 본 논문은 CO2에 대한 높은 흡수 용량과 함께 흡수제에 포함된 물의 조성을 낮춤으로써 재생 에너지를 저감할 수 있는 저수계 흡수제를 제안하였다. 이를 위해 본 연구에서는 디아민인 MAPA (3-methylaminopropylamine)와 함께 물의 일부를 대신하여 물에 비해 CO2에 대한 물리적 용해도가 높고 비열이 낮은 NMP (N-methyl-2-pyrrolidone)를 흡수제에 도입하였다. 흡수제의 CO2에 대한 흡수 용량(αrich)과 순환 흡수 용량(Δα) 및 흡수 속도는 충전탑을 이용하여 측정하였다. 2.5M의 MAPA를 포함한 흡수제를 사용했을 경우 NMP가 10 wt% 포함된 경우에 최대 순환 흡수 용량을 얻을 수 있었다. 총괄물질전달 계수는 NMP의 농도가 증가함에 따라 증가하였다. 그러나 0.5보다 더 높은 CO2 로딩 값에서는 NMP의 농도 증가에 따른 물질전달 계수의 증가 폭이 줄어들었다. lean 로딩 값이 낮은 경우에는 점성에 의한 물질전달 저항이 낮아서 NMP 첨가에 따라 총괄 물질전달 계수가 증가하나 로딩 값이 증가함에 따라 흡수제의 점도가 증가하면서 CO2와 MAPA의 확산도가 낮아지며 이에 따라 총괄 물질전달계수가 급격히 감소하였다.

3D 프린팅 소재 화학물질의 독성 예측을 위한 Data-centric XAI 기반 분자 구조 Data Imputation과 QSAR 모델 개발 (Data-centric XAI-driven Data Imputation of Molecular Structure and QSAR Model for Toxicity Prediction of 3D Printing Chemicals)

  • 정찬혁;김상윤;허성구;;신민혁;유창규
    • Korean Chemical Engineering Research
    • /
    • 제61권4호
    • /
    • pp.523-541
    • /
    • 2023
  • 3D 프린터의 활용이 높아짐에 따라 발생하는 화학물질에 대한 노출 빈도가 증가하고 있다. 그러나 3D 프린팅 발생 화학물질의 독성 및 유해성에 대한 연구는 미비하며, 분자 구조 데이터의 결측치로 인해 in silico 기법을 사용한 독성예측 연구는 저조한 실정이다. 본 연구에서는 화학물질의 분자구조 정보를 나타내는 주요 분자표현자의 결측치를 보간하여 3D 프린팅의 독성 및 유해성을 예측한 Data-centric QSAR 모델을 개발하였다. 먼저 MissForest 알고리즘을 사용해 3D 프린팅으로 발생되는 유해물질의 분자표현자 결측치를 보완하였으며, 서로 다른 4가지 기계학습 모델(결정트리, 랜덤포레스트, XGBoost, SVM)을 기반으로 Data-centric QSAR 모델을 개발하여 생물 농축 계수(Log BCF)와 옥탄올-공기분배계수(Log Koa), 분배계수(Log P)를 예측하였다. 또한, 설명 가능한 인공지능(XAI) 방법론 중 TreeSHAP (SHapley Additive exPlanations) 기법을 활용하여 Data-centric QSAR 모델의 신뢰성을 입증하였다. MissForest 알고리즘 기반 결측지 보간 기법은, 기존 분자구조 데이터에 비하여 약 2.5배 많은 분자구조 데이터를 확보할 수 있었다. 이를 바탕으로 개발된 Data-centric QSAR 모델의 성능은 Log BCF, Log Koa와 Log P를 각각 73%, 76%, 92% 의 예측 성능으로 예측할 수 있었다. 마지막으로 Tree-SHAP 분석결과 개발된 Data-centric QSAR 모델은 각 독성치와 물리적으로 상관성이 높은 분자표현자를 통하여 선택함을 설명할 수 있었고 독성 정보에 대한 높은 예측 성능을 확보할 수 있었다. 본 연구에서 개발한 방법론은 다른 프린팅 소재나 화학공정, 그리고 반도체/디스플레이 공정에서 발생 가능한 오염물질의 독성 및 인체 위해성 평가에 활용될 수 있을 것으로 사료된다.

이산화탄소 기반 플라스틱 열분해 수소 생산 공정: 지속가능한 폐어망 재활용 (Carbon Dioxide-based Plastic Pyrolysis for Hydrogen Production Process: Sustainable Recycling of Waste Fishing Nets)

  • 김유림;이슬기;정성엽;이재원;조형태
    • Korean Chemical Engineering Research
    • /
    • 제62권1호
    • /
    • pp.36-43
    • /
    • 2024
  • 폐어망은 해양 플라스틱 폐기물의 50% 이상을 차지하며, 해양생태계를 파괴하는 주요 원인으로 지목되고 있다. 이러한 문제를 해결하기 위해 폐어망은 소각, 매립, 기계적 재활용 등의 방법으로 처리되고 있으나, 부가가치가 낮은 제품으로 재활용되며, 오염 물질을 배출한다는 한계가 존재한다. 하지만 플라스틱 고분자로 구성된 폐어망은 열분해 방법을 통해 처리할 경우, 합성가스 및 열분해유와 같은 유용한 자원으로 재활용할 수 있다. 따라서 본 연구에서는 CO2 기반에서 폐어망을 촉매 열분해하여 고순도의 H2를 생산하는 공정을 제안하였다. 제안된 공정은 다음 3단계로 구성된다. 첫째, 전처리 된 폐어망을 CO2 기반 하 Ni/SiO2 촉매 열분해 반응을 통해 합성가스 및 열분해유를 생산한다. 둘째, 생성된 열분해유를 연소시켜 열분해 반응의 에너지원으로 재사용한다. 마지막으로, 합성가스를 WGS (Water-Gas-Shift) 및 PSA (Pressure Swing Adsorption)를 통해 고순도의 H2로 전환한다. 본 연구에서는 제안된 공정의 열분해 결과를 일반적인 열분해 조건인 기존 N2 기반 열분해 결과와 비교하였다. 시뮬레이션 결과, 폐어망 500 kg/h을 열분해 시 N2 기반에서는 2.933 kmol/h의 고순도 H2를, CO2 기반에서는 3.605 kmol/h 의 고순도 H2를 생산 가능했다. CO2 기반 폐어망 열분해에서 CO 생산이 향상되어 최종적으로 H2 생산량이 증대된 결과가 도출되었다. 또한 폐어망 열분해 시 CO2 기반에서는 공정 운전 과정에서 배출되는 CO2를 포집 후 활용함으로써, N2 기반 열분해에 비해 CO2 배출량을 89.8% 줄일 수 있었다. 연구 결과를 바탕으로 CO2 기반에서의 제안 공정은 폐어망 재활용과 더불어 친환경적인 수소 연료생산이라는 목표를 달성할 수 있을 것으로 기대된다.

리그노셀룰로오스 섬유-기반 3층 섬유판과 한지로 구성된 실내외 대기 오염물질 정화용 필터세트의 개발 (Development of Filtering Sets Composed of Lignocellulosic Fiber-based 3-layers Fiberboard and Traditional Korean Paper for the Purification of Indoor and Outdoor Air Pollutants)

  • 이영규;최영서;문명철;소재민;권오경;최원실;최준원;양인
    • Korean Chemical Engineering Research
    • /
    • 제62권1호
    • /
    • pp.87-98
    • /
    • 2024
  • 본 연구는 리그노셀룰로오스 섬유와 굴참나무 수피-기반 활성탄(COA)으로 제조한 3층 섬유판에 한지를 조합하여 제작한 섬유판 필터세트의 미세먼지(PM), 휘발성 유기화합물(TVOC), 폼알데하이드(HCHO) 여과능을 조사하기 위하여 수행하였다. 단백질계 접착제를 적용하여 표층에 목섬유 그리고 심층에 재생섬유/COA로 제조한 섬유판(WRF)과 한지로 제작한 섬유판 필터세트는 일반향의 연소에 의하여 발생하는 상기 오염물질을 효과적으로 여과하였다. 섬유판 제조에 있어 표층/심층에 적용되는 접착제의 함지율을 4%/4%, 5%/3%, 6%/2%로 조절하여 WRF를 제조한 후, 이를 한지와 함께 WRF-기반 필터세트 제작에 이용하였다. 이 필터세트의 PM, TVOC, HCHO 여과능은 심층의 함지율이 감소함에 따라 향상되었다. 한편 WRF-기반 필터세트 구성에 있어 45 g/m2 평량의 한지보다 25 g/m2 평량의 한지(KP-25g)를 사용하여 제작한 필터세트에서 여과능이 우수하였다. 표층에 재생섬유와 심층에 목섬유/COA로 제조한 섬유판(RWF)과 KP-25g로 구성한 섬유판 필터세트의 여과능은 WRF와 비교하여 높았다. 소형 실내공간 및 대형 옥외공간에 WRF-기반 섬유판 필터세트 및 무필터 조건과 함께 측정한 PM 및 TVOC 여과능은 RWF-기반 섬유판 필터세트에서 높았다. 따라서 RWF와 KP-25g를 조합하여 제작한 섬유판 필터세트가 실내외 공간에 존재하는 PM, TVOC 여과용 필터로서 적용이 가능할 것으로 생각한다.

절리 암반의 수리지질 및 불연속면 특성 간 상관분석을 통한 그라우팅 계획 수립의 개선 방안 (Grouting Improvement through Correlation Analysis of Hydrogeology and Discontinuity Factors in a Jointed Rock-Mass)

  • 백광민;장성간;정성우;양민준
    • 지질공학
    • /
    • 제34권2호
    • /
    • pp.279-294
    • /
    • 2024
  • 댐은 대규모 토목 구조물로서 안전한 운영을 위해 기초지반의 누수를 차단하고 추가적인 재해를 방지하기 위하여 암반 그라우팅에 대한 체계적인 접근 및 이해가 필요하다. 국내에서는 암반 그라우팅 계획에 있어 현장 기술자의 경험과 유사 사례에 의존하는 경향이 있으며, 보다 신뢰성 있는 그라우팅 계획을 위해 (토목 or 공학적) 이론과 (현장 or 지반) 조사결과를 바탕으로 한 개선방안이 필요한 실정이다. 암반에서 시행하는 그라우팅은 대부분 수리지질 및 불연속면 인자들(RQD, Js, Lu, SPI)에 의해 가장 큰 영향을 받는다. 본 연구에서는 국내 14개 현장에서 실시된 조사 자료를 토대로 수리지질학적 인자(Lu, SPI)와 불연속면 인자(RQD, Js), 그라우트 주입량(grout take) 간의 상관관계를 분석하고 암반 그라우팅 계획의 체계적인 수립 방안을 제시하였다. 연구 인자(RQD, Js, Lu, SPI) 간의 피어슨 상관계수(r)를 분석한 결과, Lu과 SPI의 상관관계(r = 0.92)가 가장 높고, RQD와 Lu(r = -0.75), RQD와 Js(r = 0.69), RQD와 SPI(r = -0.65), Js와 Lu(r = -0.47), SPI와 Js(r = -0.41) 순으로 상관관계가 감소하는 것으로 나타났다. 그라우트 주입량과 연구 인자(RQD, Js, Lu, SPI) 간 상관관계를 분석한 결과, Lu과 SPI는 값이 커질수록 주입량이 증가하는 경향을 보이나 RQD와 Js는 유의한 상관관계가 나타나지 않았다. SPI를 토대로 제안된 그라우팅 계획 수립의 접근 방법은 실제 수행한 차수 그라우팅 시공 자료와 비교‧분석을 통해 검증하였고, 향후 세부 연구 및 실무 수행에 있어 유용한 자료로 활용될 수 있다.

논벼 장.단간품종의 증발산제계수와 건물량과의 관계에 대한 연구(I) (Studies on Relations between Various Coeffcients of Evapo-Transpiration and Quantities of Dry Matters for Tall-and Short Statured Varieties of Paddy Rice)

  • 류한열;김철기
    • 한국농공학회지
    • /
    • 제16권2호
    • /
    • pp.3361-3394
    • /
    • 1974
  • The purpose of this thesis is to disclose some characteristics of water consumption in relation to the quantities of dry matters through the growing period for two statured varieties of paddy rice which are a tall statured variety and a short one, including the water consumption during seedling period, and to find out the various coefficients of evapotranspiration that are applicable for the water use of an expected yield of the two varieties. PAL-TAL, a tall statured variety, and TONG-lL, a short statured variety were chosen for this investigation. Experiments were performed in two consecutive periods, a seedling period and a paddy field period, In the investigation of seedling period, rectangular galvanized iron evapotranspirometers (91cm${\times}$85cm${\times}$65cm) were set up in a way of two levels (PAL-TAL and TONG-lL varieties) with two replications. A standard fertilization method was applied to all plots. In the experiment of paddy field period, evapotanspiration and evaporation were measured separately. For PAL-TAL variety, the evapotranspiration measurements of 43 plots of rectangular galvanized iron evapotranspirometer (91cm${\times}$85cm${\times}$65cm) and the evaporation measurements of 25 plots of rectangular galvanized iron evaporimeter (91cm${\times}$85cm${\times}$15cm) have been taken for seven years (1966 through 1972), and for TONG-IL variety, the evapotranspiration measurements of 19 plots and the evaporation measurements of 12 plots have been collected for two years (1971 through 1972) with five different fertilization levels. The results obtained from this investigation are summarized as follows: 1. Seedling period 1) The pan evaporation and evapotranspiration during seedling period were proved to have a highly significant correlation to solar radiation, sun shine hours and relative humidity. But they had no significant correlation to average temperature, wind velocity and atmospheric pressure, and were appeared to be negatively correlative to average temperature and wind velocity, and positively correlative to the atmospheric pressure, in a certain period. There was the highest significant correlation between the evapotranspiration and the pan evaporation, beyond all other meteorological factors considered. 2) The evapotranpiration and its coefficient for PAL-TAL variety were 194.5mm and 0.94∼1.21(1.05 in average) respectively, while those for TONG-lL variety were 182.8mm and 0.90∼1.10(0.99 in average) respectively. This indicates that the evapotranspiration for TONG-IL variety was 6.2% less than that for PAL-TAL variety during a seedling period. 3) The evapotranspiration ratio (the ratio of the evapotranspiration to the weight of dry matters) during the seedling period was 599 in average for PAL-TAL variety and 643 for TONG-IL variety. Therefore the ratio for TONG-IL was larger by 44 than that for PAL-TAL variety. 4) The K-values of Blaney and Criddle formula for PAL-TAL variety were 0.78∼1.06 (0.92 in average) and for TONG-lL variety 0.75∼0.97 (0.86 in average). 5) The evapotranspiration coefficient and the K-value of B1aney and Criddle formular for both PAL-TAL and TONG-lL varieties showed a tendency to be increasing, but the evapotranspiration ratio decreasing, with the increase in the weight of dry matters. 2. Paddy field period 1) Correlation between the pan evaporation and the meteorological factors and that between the evapotranspiration and the meteorological factors during paddy field period were almost same as that in case of the seedling period (Ref. to table IV-4 and table IV-5). 2) The plant height, in the same level of the weight of dry matters, for PAL-TAL variety was much larger than that for TONG-IL variety, and also the number of tillers per hill for PAL-TAL variety showed a trend to be larger than that for TONG-IL variety from about 40 days after transplanting. 3) Although there was a tendency that peak of leaf-area-index for TONG-IL variety was a little retarded than that for PAL-TAL variety, it appeared about 60∼80 days after transplanting. The peaks of the evapotranspiration coefficient and the weight of dry matters at each growth stage were overlapped at about the same time and especially in the later stage of growth, the leaf-area-index, the evapotranspiration coefficient and the weight of dry matters for TONG-IL variety showed a tendency to be larger then those for PAL-TAL variety. 4) The evaporation coefficient at each growth stage for TONG-IL and PAL-TALvarieties was decreased and increased with the increase and decrease in the leaf-area-index, and the evaporation coefficient of TONG-IL variety had a little larger value than that of PAL-TAL variety. 5) Meteorological factors (especially pan evaporation) had a considerable influence to the evapotranspiration, the evaporation and the transpiration. Under the same meteorological conditions, the evapotranspiration (ET) showed a increasing logarithmic function of the weight of dry matters (x), while the evaporation (EV) a decreasing logarithmic function of the weight of dry matters; 800kg/10a x 2000kg/10a, ET=al+bl logl0x (bl>0) EV=a2+b2 log10x (a2>0 b2<0) At the base of the weight of total dry matters, the evapotranspiration and the evaporation for TONG-IL variety were larger as much as 0.3∼2.5% and 7.5∼8.3% respectively than those of PAL-TAL variety, while the transpiration for PAL-TAL variety was larger as much as 1.9∼2.4% than that for TONG-IL variety on the contrary. At the base of the weight of rough rices the evapotranspiration and the transpiration for TONG-IL variety were less as much as 3.5% and 8.l∼16.9% respectively than those for PAL-TAL variety and the evaporation for TONG-IL was much larger by 11.6∼14.8% than that for PAL-TAL variety. 6) The evapotranspiration coefficient, the evaporation coefficient and the transpiration coefficient and the transpiration coefficient were affected by the weight of dry matters much more than by the meteorological conditions. The evapotranspiratioa coefficient (ETC) and the evaporation coefficient (EVC) can be related to the weight of dry matters (x) by the following equations: 800kg/10a x 2000kg/10a, ETC=a3+b3 logl0x (b3>0) EVC=a4+b4 log10x (a4>0, b4>0) At the base of the weights of dry matters, 800kg/10a∼2000kg/10a, the evapotranspiration coefficients for TONG-IL variety were 0.968∼1.474 and those for PAL-TAL variety, 0.939∼1.470, the evaporation coefficients for TONG-IL variety were 0.504∼0.331 and those for PAL-TAL variety, 0.469∼0.308, and the transpiration coefficients for TONG-IL variety were 0.464∼1.143 and those for PAL-TAL variety, 0.470∼1.162. 7) The evapotranspiration ratio, the evaporation ratio (the ratio of the evaporation to the weight of dry matters) and the transpiration ratio were highly affected by the meteorological conditions. And under the same meteorological condition, both the evapotranspiration ratio (ETR) and the evaporation ratio (EVR) showed to be a decreasing logarithmic function of the weight of dry matters (x) as follows: 800kg/10a x 2000kg/10a, ETR=a5+b5 logl0x (a5>0, b5<0) EVR=a6+b6 log10x (a6>0 b6<0) In comparison between TONG-IL and PAL-TAL varieties, at the base of the pan evaporation of 343mm and the weight of dry matters of 800∼2000kg/10a, the evapotranspiration ratios for TONG-IL variety were 413∼247, while those for PAL-TAL variety, 404∼250, the evaporation ratios for TONG-IL variety were 197∼38 while those for PAL-TAL variety, 182∼34, and the transpiration ratios for TONG-IL variety were 216∼209 while those for PAL-TAL variety, 222∼216 (Ref. to table IV-23, table IV-25 and table IV-26) 8) The accumulative values of evapotranspiration intensity and transpiration intensity for both PAL-TAL and TONG-IL varieties were almost constant in every climatic year without the affection of the weight of dry matters. Furthermore the evapotranspiration intensity appeared to have more stable at each growth stage. The peaks of the evapotranspiration intensity and transpiration intensity, for both TONG-IL and PAL-TAL varieties, appeared about 60∼70 days after transplanting, and the peak value of the former was 128.8${\pm}$0.7, for TONG-IL variety while that for PAL-TAL variety, 122.8${\pm}$0.3, and the peak value of the latter was 152.2${\pm}$1.0 for TONG-IL variety while that for PAL-TAL variety, 152.7${\pm}$1.9 (Ref.to table IV-27 and table IV-28) 9) The K-value in Blaney & Criddle formula was changed considerably by the meteorological condition (pan evaporation) and related to be a increasing logarithmic function of the weight of dry matters (x) for both PAL-TAL and TONG-L varieties as follows; 800kg/10a x 2000kg/10a, K=a7+b7 logl0x (b7>0) The K-value for TONG-IL variety was a little larger than that for PAL-TAL variety. 10) The peak values of the evapotranspiration coefficient and k-value at each growth stage for both TONG-IL and PAL-TAL varieties showed up about 60∼70 days after transplanting. The peak values of the former at the base of the weights of total dry matters, 800∼2000kg/10a, were 1.14∼1.82 for TONG-IL variety and 1.12∼1.80, for PAL-TAL variety, and at the base of the weights of rough rices, 400∼1000 kg/10a, were 1.11∼1.79 for TONG-IL variety and 1.17∼1.85 for PAL-TAL variety. The peak values of the latter, at the base of the weights of total dry matters, 800∼2000kg/10a, were 0.83∼1.39 for TONG-IL variety and 0.86∼1.36 for PAL-TAL variety and at the base of the weights of rough rices, 400∼1000kg/10a, 0.85∼1.38 for TONG-IL variety and 0.87∼1.40 for PAL-TAL variety (Ref. to table IV-18 and table IV-32) 11) The reasonable and practicable methods that are applicable for calculating the evapotranspiration of paddy rice in our country are to be followed the following priority a) Using the evapotranspiration coefficients based on an expected yield (Ref. to table IV-13 and table IV-18 or Fig. IV-13). b) Making use of the combination method of seasonal evapotranspiration coefficient and evapotranspiration intensity (Ref. to table IV-13 and table IV-27) c) Adopting the combination method of evapotranspiration ratio and evapotranspiration intensity, under the conditions of paddy field having a higher level of expected yield (Ref. to table IV-23 and table IV-27). d) Applying the k-values calculated by Blaney-Criddle formula. only within the limits of the drought year having the pan evaporation of about 450mm during paddy field period as the design year (Ref. to table IV-32 or Fig. IV-22).

  • PDF