• Journal of environmental and Sanitary engineering
• /
• v.18 no.1
• /
• pp.51-57
• /
• 2003

Indoor air quality(IAQ) in workplace and residential environments has been concern of people. Recently, Ministry of Environment in Korea has recognized the potential risk on the healthy effect related to indoor air pollution at home. Therefore, the purpose of this study was performed to measure the indoor air pollutants of IAQ at different homes and investigate to compare the perception of IAQ recognition at home from questionnaire survey in Seoul. We estimated the IAQ of selected 6 homes based on site region and housing type. The indoor air pollutants and parameters such as temperature, relative humidity, respirable suspended particulate matter($PM_{10}$), formaldehyde(HCHO), total bacteria counts, carbon monooxide(CO) and carbon dioxide($CO_2$) were monitored for summer and winter. In monitoring results, the respirable suspended particulate matter(($PM_{10}$) and indoor airborne bacteria level of home 5 and 6 were higher than the standard of the public $150{\;}{\mu}g/m^3$ and $500{\;}{\mu}g/m^3$, the level formaldehyde(HCHO) was exceed 0.1 ppm of the standard of Korea at all monitored homes. In statistics analysis, we could find a correlation between the building age and the concentration of CO, TBC were significant at 0.01 level and Relative Humidity was significant at 0.05 level for summer. Finally, the important air pollutants of IAQ in home were HCHO and total bacteria counts(TBC). And we performed a questionnaire survey of 500 people about their awareness for the importance of IAQ in our home during same period. In results, all most response of occupant has recognized the importance of IAQ at home. Therefore, it can be concluded that the IAQ of selected 6 home studied was perceived as acceptable, it is recommended that the government related IAQ was suggested the guideline and control of IAQ problems, and the occupants need to be effort to reduce the exposure of sources to undesirable pollutants.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.4
• /
• pp.319-345
• /
• 2019

Recently planification and effort for management, assessment and discovery of geological heritagesare being increasingly demanded with institutional strategies such as geopark, as their preservation is asked socially. In this study, we discovered geological heritages in the Jeolla Province and then performed assessment of the value and grading of them and finally suggested a promising and suitable site for the National Geopark. A total of 325 geological heritages are listed on literature review and then detailed description in field and assessment of the value for selected 158 geoheritages are completed. The assessment items are categorized into intrinsic value, subsidiary value, and preservation/management part. The intrinsic value is subdivided into scientific/educational value, composed of representativeness, rarity, geodiversity, typicality, reproducibility, and particularity, and geomorphological/landscape value composed of scale, naturality (integrity), scenery (aesthetic value). Also, subsidiary value consist of 7 subsections of soil function, ecological function, tourism value, geological resource, historical value, folk tale or legend and symbolic value, and accessibility, convenient facility (infrastructure), management condition (legal protection) is evaluated in preservation/management part. The heritages in the Jeolla Province subdivided into three types: 73 geological heritages, 42 geomorphological heritages, and 42 composite heritages. Based on points acquired in intrinsic value, all geological heritages are graded Class-I to -V. As a result, numbers of geoheritage belong to Class-I (protection at world level), -II (protection at national level), -III (nationdesignated management), -IV (involved management list), -V (candidate management list) are 12, 39, 52, 34, 21, respectively. Finally, we construct database based on Arc-GIS with all informations for each geological heritage and suggest three promising and suitable sites, 'Jirisan-Seomjingang Area' and 'south coast area of Jeolla Province', for the National Geopark.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.19-29
• /
• 2006

The first Japanese pilot-scale $CO_2$ sequestration project has been undertaken in an onshore saline aquifer, near Nagaoka in Niigata prefecture, and time-lapse well logs were carried out in observation wells to detect the arrival of injected $CO_2$ and to evaluate $CO_2$ saturation in the reservoir. $CO_2$ was injected into a thin permeable zone at the depth of 1110m at a rate of 20-40 tonnes per day. The total amount of injected $CO_2$ was 10400 tonnes, during the injection period from July 2003 to January 2005. The pilot-scale demonstration allowed an improved understanding of the $CO_2$ movement in a porous sandstone reservoir, by conducting time-lapse geophysical well logs at three observation wells. Comparison between neutron well logging before and after the insertion of fibreglass casing in observation well OB-2 showed good agreement within the target formation, and the higher concentration of shale volume in the reservoir results in a bigger difference between the two well logging results. $CO_2$ breakthrough was identified by induction, sonic, and neutron logs. By sonic logging, we confirmed P-wave velocity reduction that agreed fairly well with a laboratory measurement on drilled core samples from the Nagaoka site. We successfully matched the history changes of sonic P-wave velocity and estimated $CO_2$ saturation a(ter breakthrough in two observation wells out of three. The sonic-velocity history matching result suggested that the sweep efficiency was about 40%. Small effects of $CO_2$ saturation on resistivity resulted in small changes in induction logs when the reservoir was partially saturated. We also found that $CO_2$ saturation in the $CO_2$-bearing zone responded to suspension of $CO_2$ injection.

• Journal of Life Science
• /
• v.30 no.10
• /
• pp.905-911
• /
• 2020

The adjuvant effect of PAMAM dendrimer G4 (PAMAM) on the induction of humoral and cellular immune responses against keyhole limpet hemocyanin (KLH) was examined. Mice were immunized subcutaneously twice at two-week intervals with KLH, with or without PAMAM dendrimer (100 ㎍/mouse), and the mice immunized with KLH+PAMAM showed significantly higher antibody titers against KLH than those immunized with KLH alone. The assay for determining the isotypes of the antibodies showed that PAMAM augmented the KLH-specific antibody titers of IgG1, IgG2a, IgG2b, IgG3, and IgM. In addition, mice immunized twice with KLH+PAMAM followed by a subcutaneous injection of KLH (20 ㎍/site) 7 weeks after the primary immunization exhibited a higher delayed-type hypersensitivity (DTH) reaction than those treated with KLH alone. In an in vitro analysis of T lymphocyte proliferation in response to KLH in week 8, the splenocytes of mice treated with KLH+PAMAM showed significantly higher proliferating activity than those treated with KLH alone, and the culture supernatants of cell cultures from mice immunized with added PAMAM dendrimer showed higher levels of KLH-specific cytokine (IL-4 and IFN-r) production. These results suggest that PAMAM dendrimer G4 possesses a potent immune-adjuvant activity for enhancing both humoral and cell-mediated immunity specific to foreign antigens.

• Journal of Mushroom
• /
• v.12 no.2
• /
• pp.132-137
• /
• 2014

Green mold disease caused by Trichoderma species has recently caused considerable damage to oyster mushroom industries in Korea. This disease Trichoderma, Penicillium, Aspergillus, such as in (genus) to be included in a disease caused by a species that collectively the largest incidence and damage is caused by the pathogen Trichoderma genus. T. longibrachiatum, Trichoderma koningii, Trichoderma virens, T. hazianum, T. atroviride, and T. pseudokoningii were detected on oyster mushroom beds and, of them, T. virens, T. hazianum, T. longibrachiatum was the most frequently detected. The knowledge concerning physiological and ecological properties of Trichoderma spp. was essential for their effective control. T. longibrachiatum hyphal growth is very fast, spore formation, and, particularly well-chlamydospore formation characteristics, and reviews are dark green discoloration. T. koningii, fast mycelial growth, aerial hyphae and spores in aerial hyphae formation is concentrated. T. virens, especially if the color change caused by spore-forming, slow, late in infection, the more severe the damage is discovered. T. hazianum fast mycelial growth, white aerial hyphae and late turns dark green. After spore formation hyphae glob of white pustules or tufts on the top of the formation. T. atroviride. aerial hyphae usually the mycelial growth and spore formation in the unlikely event of the formation and smells similar to the smell of coconut is that. Fast T. pseudokoningii mycelial growth, spore formation is formed around the inoculation site, discoloration of the medium color and well formed chlamydospores.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.89-110
• /
• 1998

Variations of backfill load on the metal-polyethylene composite( MPC ) pipes buried in various trenches backfill afterward were investigated in this paper. The backfill loads obtained by the finite element method( FBM ) were compared with those calculated by the well-known MarstonBpangler(M-5) theory. The reliability of the finite element analysis used in this study was examined by an inaitu best for the buried pipe. The backfill lords and deflections on the real-size pipe buried on-site were measured while increasing the backfill height. In addition, further investigations were made for the variations of the backfill loads as a function of several important parameters such as the backfill soil type, bach. height$(\leq4.0m)$, diameter of the pipe$(B.$1.0m)$, and trench width($\leq 3.0 B_c$). It is confirmed that the M-S theory predicts reasonably well the backfill loafs of the MPC of the M-S backfill coils be 0.13 and 0.15 for the SC and SM coils in the D unman soil model, respectively. The load ratio, Wu-s/WwgM for a narrow trench varies negligibly with the back(111 height but fiends to increase for a wide trench. The ratio increases with increasing diameter of the pipe for a narrow trench while decreasing for a wide trench. It is also found that the ratio generally decreases as the degree of compaction increases and BM soil exhibits larger load ratio than that of SC soil.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.2
• /
• pp.11-26
• /
• 2013

Designing large parks such as Yongsan Park requires the open-ended process-oriented design approach in complex layers rather than the conventional self-completed master plan method. This study aims to examine the characteristics of process-oriented design in the eight invited entries of "International Competition for the Master Plan of the Yongsan Park, Korea"(2012). For this purpose, it analyzed each entry according to three criteria: objects of process-oriented approach, time factor and its features of phasing plan, and presentation method of the process. This analysis can not only critically review the current level of the process-centered design methodology but also suggest strategic future directions for Yongsan Park. The objects of process-oriented design in the eight works were order of physical space development, restoration process of ecosystem, recovering process of publicity, and economic operation and management. Main considerations in the objects were connections to adjacent urban fabrics, links to regional green and water system, reuse of existing buildings and infrastructures in the site. The temporal criteria of the phasing plan had two aspects. One was planning a certain time and period, and the other was just establishing an order of phases. Most of the presentation method of process was the phasing plan, but some of the entries suggested a scenario plan. The eight works of "International Competition for the Master Plan of Yongsan Park" did not attempt process-oriented designs entirely and completely. Rather, they tried to introduce the phasing plan as part of a process-centered design. Also, they took an eclectic approach between master plan and process-oriented design instead of rejecting the conventional master plan approach.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.80-109
• /
• 2020

The Sacheonwangsa Temple in Silla is an esoteric temple that was founded provisionally in 670, and was completed in 679. This study attempted to elucidate the planning method of the Sacheonwangsa Temple based on the results of research on excavations and investigations into its construction processes and construction measures thereof. The research results are as follows. (1) In the site construction, assuming the size of one Bang (坊) on the south of Nangsan Mountain, after dividing the north-south width into three equal parts, there is a possibility that two of these parts were set to the flat portion. (2) In the 'Jochang (祖創, 670)', it is estimated that an area of 300 cheoks by 300 cheoks was postulated on the flat surface, and, as an initial conception, the mandala's plane design of the outer square 2 hasta (3 cheoks) and inner square 1 hasta (1.5 cheoks) was originally devised for the setting of 'Mudra (神印)', and an area 100 times greater has been set as the basis in the scale and layout planning of the central block. (3) During 'Gaechang (攺刱, ~679)', it is judged that because of the narrowness of the distance between the Pagoda and Geumdang Hall, which occurs when the center of the Geumdang Hall coincides with the center of 'the first stage of the foundation (先築基壇)', the scale and layout planning were adjusted from the initial conception. (4) The arrangement of the building was determined by dividing the fixed size of the central block (280 cheoks by 320 cheoks). Specifically, the east-west direction is set on the quartile's line of the east-west width of the central block, and in contrast, the north-south direction is based on the structural characteristics of the central block. It is presumed that the position of the transept was determined through the division and adjustment of the column spacing of the east-west corridor, then the Geumdang Hall and Altar were based on this. (5) The scale of the Geumdang Hall and Pagoda is determined by the petition of the division by the unit fraction starting from the quartile's line of the central block's east-west width. This planning is understood to be based on the self-similarity, which is rooted in the mandala's plane design as the model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.575-580
• /
• 2017

This study analyzed the effects of RGG box of hnRNP A1 on its subcellular localization and stabilization of hnRNP A1 over a three year period from October 2014. First, a 6R/K mutation in RGG box was generated, and pcDNA1-HA-hnRNP A1(6R/K) was constructed. The subcellular localization of hnRNP A1(6R/K) from the HeLa cells transfected with this plasmid DNA was analyzed by immunofluorescence microscopy. HA-hnRNP A1(6R/K) was found to exhibit nuclear and cytoplasmic fluorescence. The stability of hnRNP A1(6R/K) was checked by Western blot analysis using the expressed protein from the HeLa cells transfected with the pcDNA1-HA-hnRNP A1(6R/K). The results show that HA-hnRNP A1(6R/K) has a smaller size. These confirm that HA-hnRNP A1(6R/K) is localized both in the nuclear and cytoplasm, not because 6R/K mutation affects the nuclear localization of hnRNP A1, but because 6R/K mutation causes hnRNP A1(6R/K) to cleave at the mutation or near the mutation site. The cleaved protein fragment, which lacks the M9 domain (i.e. nuclear localization signal of hnRNP A1), did not exhibit nuclear fluorescence. This suggests that the arginines of RGG box in hnRNP A1 play an important role in stabilizing hnRNP A1. An analysis of the RNA-binding ability of hnRNP A1(6R/K) expressed and purified from bacteria will be a subsequent research project.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2018

As part of a research dedicated to the field evaluation of the durability of concrete subjected to freezing-thawing, this study analyzes the relationship between the surface roughness and the relative dynamic elastic modulus through image analysis. Four mix compositions with water-to-binder ratios (W/B) of 40%, 50%, 60% and 70% and without AE agent were considered to provoke early freezing. The basic physical properties of the mixes including the relative dynamic elastic modulus and the compressive strength were first evaluated experimentally according to W/B. Then, tests were performed to measure the surface roughness followed by photographs and SEM image analysis. The measured surface roughness tended to increase with larger number of freezing-thawing cycles regardless of W/B. The relative dynamic elastic modulus appeared to increase gradually with the number of cycles for the relatively denser mixes with W/B of 40% and 50%. Besides, the surface roughness increased only at rupture for the mixes with W/B of 60% and 70%. Moreover, the analysis of the photographs of the surface of the mixes with W/B of 40% and 50% revealed that the degradation progressed gradually from the surface with the freezing-thawing cycles. However, for the mixes with W/B of 60% and 70%, apparent change of the surface remained very insignificant until rupture at which damage like cracking could be observed. Consequently, the analysis of surface photograph or the measurement of the surface roughness presented some limitation in assessing the degree of freezing-thawing-induced degradation in case of relatively porous specimens. On the other hand, the photograph and surface roughness appeared to be sufficient for assessing such degradation for the mixes with W/B of 40% and 50%. Accordingly, the image of the surface and the surface roughness are potentially applicable on site for the assessment of freezing-thawing damages in relatively dense mixes.