• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.2
• /
• pp.183-189
• /
• 2019

Researches utilizing the fourth industrial revolution technology are being conducted as a breakthrough for improving the earthworker productivity. In order to make the earthwork site smarter, it is necessary to digitize the construction site topography at first. For this purpose, photogrammetry using drones and LiDAR on MMS have been recently used. The purpose of this study is to analyze the accuracy of LiDAR by installation angles for verifying the application of MMS in the construction site. As a result of comparing the coordinates measured by the total station and the LiDAR, a small error of about 1-2 centimeters was shown. It is confirmed that MMS could be well applied to the earthwork site. In addition, there was no significant difference in the accuracy of the acquired coordinates according to the installation angle of the LiDAR, but the shape of the point clouds was different. The larger the installation angle, the better the shape of the site terrain is measured.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.5
• /
• pp.73-82
• /
• 2023

Optimization of Construction Site Layout Planning (CSLP) heavily relies on workers' travel paths. However, traditional path generation approaches predominantly focus on the shortest path, often neglecting critical variables such as individual wayfinding tendencies, the spatial arrangement of site objects, and potential hazards. These oversights can lead to compromised path simulations, resulting in less reliable site layout plans. While Deep Reinforcement Learning (DRL) has been proposed as a potential alternative to address these issues, it has shown limitations. Despite presenting more realistic travel paths by considering these variables, DRL often struggles with efficiency in complex environments, leading to extended learning times and potential failures. To overcome these challenges, this study introduces a refined model that enhances spatial navigation capabilities and learning performance by integrating workers' visibility into the reward functions. The proposed model demonstrated a 12.47% increase in the pathfinding success rate and notable improvements in the other two performance measures compared to the existing DRL framework. The adoption of this model could greatly enhance the reliability of the results, ultimately improving site operational efficiency and safety management such as by reducing site congestion and accidents. Future research could expand this study by simulating travel paths in dynamic, multi-agent environments that represent different stages of construction.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.1
• /
• pp.7-10
• /
• 2008

Effect of Pd addition on crystal structures of two nickel silicides, NiSi and $NiSi_2$, is investigated by using an ab initio calculation. A Pd atom substitutes a Ni and Si site, respectively, to evaluate the preferable site between them. Pd prefers Ni site to Si site in NiSi, while it prefers Si site to Ni site in $NiSi_2$. The calculated total energy also indicates that the Pd substitution to Si site stabilizes the $NiSi_2$ structure. This calculated data matches well with the experimental data obtained from Atom probe.

• Nuclear Engineering and Technology
• /
• v.14 no.1
• /
• pp.17-21
• /
• 1982

In this paper, as a site evaluation technique, SPMF(Site Population-Meteorology Factor) which is modified from SPF(Site Population Factor) of tile USNRC model, is defined from site population and meteorology data in order to consider the radiological impacts to the population at large from the atmospheric dispersion of the radioactive effluents released during routine plant operation as well as accidental conditions. The SPMF model proved its propriety from the comparison of SPMF and SPF for Kori site. The relative suitability of Korean sites to the U.S. sites have been also examined using SPF.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.5
• /
• pp.472-481
• /
• 2015

Black carbon (BC) aerosols were monitored at the KIST site ($37.603^{\circ}N$, $127.046^{\circ}E$) and Cheonan-KOREATECH site ($36.766^{\circ}N$, $127.281^{\circ}E$) during the pre KORea-US Air Quality Study (KORUS-AQ) campaign using a couple of Muliti Angle Absorption Photometers (MAAP). BC mass concentrations were presented as $2.14{\pm}1.06{\mu}g/m^3$ and $0.94{\pm}0.60{\mu}g/m^3$ at KIST site (Seoul) and KOREATECH site (Cheonan), respectively. BC mass concentrations measured at KIST and KOREATECH sites from 22:00 on May 22 to 12:00 on May 23, 2015 showed 80% and 72% higher than average BC mass concentrations measured during campaign period, respectively. It indicates both sites could be influenced by a remote source. Similar patterns of BC concentrations between two sites from 20:00 to 24:00 on June 6, 2015 implies that the BC could be transported into both sites and then be stagnant inside the Korean Peninsula. Diurnal variation of BC in weekdays and weekends were also presented for the KIST and KOREATECH sites. Morning rush hour peak was observed at KIST site located in metropolitan area though no distinct morning rush hour peak was not observed at KOREATECH site located in a suburban area. This study revealed transport pathways of BC near the Korean Peninsula using back-trajectory analysis of BC measured both in a metropolitan area and in a suburban area.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.3
• /
• pp.283-290
• /
• 2016

Recent, the construction of the multi-purpose double-deck tunnel is required to solve the flood protection and congested area at urban city. The multi-purpose double-deck tunnel is desperately needed for the introduction of efficient utilization of underground space in addition to the main feature of road capabilities. A basic review was performed for site selection to consider the control capability and features of road tunnel at the same time, and the processable flow in accordance with tunnels cross section of double deck tunnel. Site Selection Criteria for multi-purpose use of the double-deck tunnel has been proposed through the site selection criteria by use of the tunnels review. Also the estimation processable flow was performed to review the versatility of double-deck tunnel due to design of tunnel cross-section. Site Selection of double-deck tunnel from this study can be seen the need for a complex consideration through a variety of analyzes.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.767-778
• /
• 2006

This study was carried out to evaluate the temporal variations of VOCs at an urban site, and to compare the concentrations of VOCs at an urban site in Daegu with those at a suburban site in Gyeongsan. Three hourly VOC samples in the ambient air were collected using a sequential tube sampler (STS 25, Perkin Elmer) throughout two weeks during May and July representing spring and summer seasons, respectively. The VOC concentrations were determined by an automatic thermal desorption apparatus with GC/MS analysis. A total of 12 VOCs of environmental concern were determined, which are chloroform, benzene, trichloroethylene, toluene, tetra-chloroethylene, ethylbenzene, m+p-xylenes, o-xylene, styrene, 1,3,5- and 1,2,4-trimethylbenzenes. Among 12 target VOCs, the most abundant compound appeared to be toluene, being followed by xylenes. The mean concentrations at the urbn site were 1.2 pub for benzene and 20.4 ppb for toluene (n=221) while the mean levels at the suburban site were 0.9 ppb and 4.3 ppb for benzene and toluene (n=96), respectively. The urban site concentrations were typically several-fold higher than those measured at the suburban site. It was found that general trends of VOC levels were significantly dependent on traffic conditions at the sampling site since VOC concentrations were at their maximum during rush hours, i.e. $9{\sim}12a.m$ and $6{\sim}9p.m$. Statistical investigations were conducted to investigate any significant relationships between VOC concentrations and affecting factors. Calculated correlation coefficients among VOCs were positively significant at a level of 0.05 in most cases. Increased concentrations of toluene in the urban site were estimated to reflect the effect of large industrial sources, mainly from textile industry.

• Elastomers and Composites
• /
• v.47 no.3
• /
• pp.254-258
• /
• 2012

Material characteristics and the prediction of life time of polyacrylic rubber (ACM) for automotive engine gasket were studied. Two kinds of ACM rubber compounds, having chlorine cure-site and carboxyl cure-site, were made with optimum formulations and the properties of each materials were examined. As a test results for the thermal properties and compression set, which are very important in the application for the automotive engine gasket, the compound using ACM with carboxyl cure-site was evaluated as having a better characteristics than that of ACM with chlorine cure-site. Arrhenius relationship based on time-temperature superposition principle (TTSP) was obtained through the accelerated heat aging test to predict the useful life-time for the compound using ACM with carboxyl cure-site.

• Earthquakes and Structures
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2018

A new site classification system and site coefficients based on local site conditions in Korea were developed and implemented as a part of minimum design load requirements for general seismic design. The new site classification system adopted bedrock depth and average shear wave velocity of soil above the bedrock as parameters for site classification. These code provisions were passed through a public hearing process before it was enacted. The public hearing process recommended to modify the naming of site classes and adjust the amplification factors so that the level of short-period amplification is suitable for economical seismic design. In this paper, the new code provisions were assessed using dynamic centrifuge tests and by comparing the design response spectra (DRS) with records from 2016 Gyeongju earthquake, the largest earthquake in history of instrumental seismic observation in Korea. The dynamic centrifuge tests were performed to simulate the representative Korean site conditions, such as shallow depth to bedrock and short-period amplification characteristics, and the results corroborated with the new DRS. The Gyeongju earthquake records also showed good agreement with the DRS. In summary, the new code provisions are reliable for representing the site amplification characteristic of shallow bedrock condition in Korea.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3247-3255
• /
• 2021

As Probabilistic Safety Assessments (PSAs) are thoroughly conducted for the Site Operating States (SOSs) for a single unit, multi-unit Probabilistic Safety Assessments (MUPSAs) are ongoing worldwide to address new technical challenges or issues. In South Korea, the determination of the site operating states for a single site requires a logical approach with reasonable assumptions due to the fact that there are 4-8 operating units for each site. This paper suggests a simulation model that gives a reasonable expectation of the site operation states using the Monte-Carlo method as a stochastic approach and deterministic aspects such as operational policies. Statistical hypothesis tests were conducted so that the reliance of the simulation results can be guaranteed. In this study, 7 units of the Kori site were analysed as a case study. The result shows that the fraction of full power for all 7 units is nearly 0.45. For situations when more than two units are not in operation, the highest fraction combination was obtained for Plant Operation State (POS) 8, which is the stage of inspection and repairment. By entering various site operation scenarios, the simulation model can be used for the analysis of other site operation states.