• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.57-64
• /
• 2021

The speed change lane is installed at the point where the roads are connected on the urban roads, reducing the relative speed to facilitate traffic communication. However, in the case of the speed limit of 30 km/h in accordance with the implementation of the safe speed "5030" in the city, the standard is ambiguous, and there are criticisms about the installation of the transmission lane. This study conducted a pilot study on the traffic patterns of the speed change lanes, focusing on the section where the safe speed "5030" policy was scheduled to be implemented after theoretical consideration of the speed change lanes. After on-site investigation, as a result of analyzing the traffic pattern according to the travel speed of the main road according to road conditions and traffic conditions, the effectiveness of the speed change lane according to the safety speed "5030" was analyzed. In this study, the installation criteria for speed change lane by speed were presented. The criteria is that "speed change lanes should not be installed when the speed limit is 30 km/h, and speed change lanes should be installed when the speed limit is 50 km/h." The criteria will be considered as a reference when establishing engineering standards for connection of other facilities in urban areas in the future. It is expected that unnecessary restrictions on individuals' exercise of private property rights will be minimized, smooth traffic flow and secure safety by the installation of speed change lanes and expansion of turning radius.

• Journal of Environmental Impact Assessment
• /
• v.29 no.6
• /
• pp.441-452
• /
• 2020

The assessment of the river environment is widely applied as a method to establish the purpose and direction of river rehabilitation projects. This includes surveying and assessing the current state of the river environment and determining whether a previous river project was properly executed. The city of Seoul executed ecological river rehabilitation activities for the tributaries of the Han River from the 2000s following a masterplan to recover the physical shape and ecological functionality of damaged rivers. After the rehabilitation activities, the river environment had been changed substantially. In this study, physical properties, water quality properties, and ecological properties were assessed for 28 tributaries underthe control of the city of Seoul, and then those 3 properties were synthetically reassessed. From the result of the study on the physical properties, it was found that mostrivers had II-III grades. As for water quality properties, rivers had III-IV grades. The damaged rivers showed low grades of D-E based on the Aquatic Ecosystem Health evaluation. Accordingly, we concluded that all rivers of Seoul City have an unhealthy environment in terms of water quality and Aquatic Ecosystem Health, therefore it is regarded that long-term and systematic improvements are required.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.395-399
• /
• 2011

Material of the gasket for lithium ion battery requires the chemical resistance, the electrical insulting property, the compression set, the anti-contamination level and the low temperature resistance. We compounded ethylene propylene diene monomer (EPDM), which showed widely different solubility parameter index, with adjusting the amount of metal oxide as an activator. We did long-term test and compression set against an electrolyte with consideration for operating conditions in lithium-ion battery. In these tests, we checked the physical, chemical characteristics and the effect to lithium ion battery with different kinds of activators. In case of rubber with ZnO as an activator, through 1000 h depositing test in propylene carbonate which is one of representative solvents, we could get the satisfying characteristics and result. However, $Zn^{2+}$ had eluted in the ion elution test. So, ZnO should be limited in EPDM compound for the gasket material in lithium-ion battery.

• Journal of Wetlands Research
• /
• v.23 no.2
• /
• pp.154-162
• /
• 2021

The naturally opened Han river estuary is a place where the flows of the Han river, Imjin river, Yaesung river meet with West Sea of Korea, so the hydrodynamic mechanism(Impact-Response) structure of Han river estuary is complex. Continuous observation and measurement due to the morphological characteristics at the estuary are required to maintain the estuary environment and river management facilities. However, the Sannam wetland(the study area) is in the military operation area. Therefore, Sannam wetland has the limited access under the control from military office. In 2020, there had a natural disaster due to flooding in August and COVID-19, and it made a survey hard. The noncontact survey technique, the analysis of LANDSAT images at Sannam wetland, was applied to analyze riverbed fluctuation and morphological transformation around Sannam wetland. LANDSAT images obtained from EarthExplorer, USGS and analyzed by QGIS. The analysis was performed based on the area and the distance near Sannam wetland. As a result, an erosion was happened on the downstream of the study area, and the upstream of the study area did not have any serious sediment transport. Considering the resolution of LANDSAT images, this noncontect survey technique is applicable to manage the study area. From the analysis of LANDSAT images, it is assumed that the tidal effect is greater than the inflow from the upstream. The pattern change of tidal response causes the damage of the river facilities near the Hangang river estuary.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.290-298
• /
• 2021

A purification process was performed for the application of natural graphite as an anode material. The influence of the structural change and impurity content of graphite according to the process on the anode electrochemical characteristics was investigated. Natural graphite was chemically/physically purified by acid-treatment which used different amounts of solution of ammonium fluoride/sulfuric acid in the same ratio and thermal treatment used different temperatures (800~2500 ℃). Acid-treatment had limitation to remove impurities, and identified that all impurity contents was removed except some traces of atom such as Si by after progressed thermal-treatment until 2500 ℃. The anode materials characteristic of graphite treated by purification process was improved, and changes in the structure and impurity contents affected dominantly the capacity, rate property and initial Coulombic efficiency. Consequently, the complex purification process improved the graphite structure and also the performance of lithium ion battery by controlling the excessive formation of solid electrolyte interphase and expanding Li⁺ insertion space originated from the effective removal of impurities.

• Food Engineering Progress
• /
• v.23 no.2
• /
• pp.125-133
• /
• 2019

The characteristics of extracts and precipitates after extraction at different water temperature (25, 50, 75, 95℃), ethanol ratio (25, 50, 75, 100%), and extraction method (stir, soak, autoclave) of yam powder and raw yam were investigated. The total polyphenol content was the highest in the 50% ethanol extract of yam powder. The DPPH radical scavenging activity was the highest in the 75% ethanol extraction and the crude saponin content was the highest in the 95℃ water extraction. Tyrosinase inhibitory activity was the highest in 95℃ water extraction, low concentration of ethanol extraction, and autoclave extraction. The peak viscosity, trough, and final viscosity of the precipitates increased after ethanol extraction, whereas decreased after the 95℃ water extraction and the autoclave, indicating the destruction of starch granules. This was confirmed by observing the starch granules broken using the SEM. The significance of this study was to investigate the possibility of the use of yam resources as a material, processing product development, skin beauty functional food and cosmetic material.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.864-872
• /
• 2020

In accordance with the sulfur regulations of the International Maritime Organization (IMO), very low sulfur fuel oil (VLSFO) shows various production-dependent physico-chemical properties. This study aims to use as basic data for oil spill response according to study of physico-chemical characteristics of VLSFO and mixed fuel oil of VLSFO-HSFO. The mixed fuel oil was prepared by mixing 25, 50, 75 mass% of HSFO with VLSFO containing 0.46 and 0.36 mass% of sulfur. The physico-chemical properties such as the kinematic viscosity, pour point and distribution of Saturates, Aromatics, Resins, and Asphaltenes (SARA) were studied in the laboratory. As mixed of 75 mass% of HSFO with high the kinematic viscosity and low pour point in VLSFO, the kinematic viscosity of the mixed fuel oil increased to 350.2 %, and VLSFO with pour point of 23℃ and -11℃ lowered or raised to -3℃ and -6℃ respectively. As HSFO was mixed in VLSFO with a small Asphaltenes distribution, the Saturates distribution decreased to 68.8% and Asphaltenes distribution increased to 1,417 % dramatically.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.3
• /
• pp.45-51
• /
• 2021

The evaluation of the degree of compaction of the embankment area, which accounts for most of highway earthworks, is generally performed by a flat plate loading test. The plate loading test is a traditional test method and has high reliability in the field. However, as reaction force equipment must be carried out and it takes about 40 minutes per site during the test, there may be limitations in managing the entire expanse of earthworks. Meanwhile, in order to overcome this, the Ministry of Land, Infrastructure and Transport proposed a simple method of evaluating the level of compactness in the provisional guidelines for compaction management of the packaging infrastructure in 2010. However, it has not been utilized at the highway construction site until now, 10 years later. Therefore, this study attempted to verify the utility of the compaction evaluation method using LFWD (Light Falling Weight Deflectometer) of the impact loading method among the test methods suggested in the provisional guideline. To this end, the correlation was derived by conducting a plate loading test and an LFWD test for each site property and compaction degree. As a result of the test, there was no consistency of test data in the ground with a relative compaction of 80% or less. However, it was confirmed that the correlation has a tendency to increase beyond that. If the test method or test equipment is improved to ensure the consistency of the test values of the impact loading method in the future, it will play a big role in solving the blind spot for compaction management in the earthworks.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.1
• /
• pp.9-18
• /
• 2021

Recently, the rapid proliferation, introduction, and application of the fourth industrial revolution technology has emerged as a trend in the construction market. Building Information Model (BIM) technology is a multidimensional information system that forms the basis of the fourth industrial revolution technology. The river sector utilizing this information-based system is also being actively reviewed, for example, the current measures for maintenance. In recent years, active research and current work should be done to reflect the need for river experts to introduce BIM into the river field. In addition, the development of tools and support software for establishing various information systems is essential for the activation of facility maintenance information systems reflecting advanced technology and to establish and operate management plans. A study on the maintenance of river facilities involves using existing drawings to build a three-dimensional (3D) information model, check the damage utilizing it, and inform it, and utilize it as the data for maintenance reinforcement. This study involved determining a method to build a river facility without the existing information system and using the property maintenance information with 3D modeling to provide a more effective and highly utilized management plan to check maintenance operations and manage damages.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.1
• /
• pp.22-28
• /
• 2021

Multivariate processes, such as chemical and mechanical process, power plants are operated in a state where several facilities are complexly connected, the fault of a particular system can also have fatal consequences for the entire process. In addition, since process data is measured in an unstable environment, outlier is likely to be include in the data. Therefore, monitoring technology is essential, which can remove outlier from measured data and detect failures in advance. In this paper, data obtained from dynamic and multivariate process models was used to detect fault in various type of processes. The dynamic process is a simulation of a process with autoregressive property, and the multivariate process is a model that describes a situation when a specific sensor fault. Mahalanobis distance was used to remove outlier contained in the data generated by dynamic process model and multivariate process model, and fault detection was performed using ICA. For comparison, we compared performance with and a conventional single ICA method. The proposed fault detection method improves performance by 0.84%p for bias data and 6.82%p for drift data in the dynamic process. In the case of the multivariate process, the performance was improves by 3.78%p, therefore, the proposed method showed better fault detection performance.