• Journal of Navigation and Port Research
• /
• v.33 no.6
• /
• pp.437-442
• /
• 2009

The PID controller type autopilot is applied to support shipmaneuvering for course-keeping and heading control. A control constants of autopilot system should be evaluated by promoting energy loss (fuel consumption) from the view point of economic efficiency of the ship. This paper is obtained control constants of autopilot system from the RCGA pursued the minimum energy loss. In addition, the controller which is designed involves a constrained optimization problem. The performance of the proposed method is demonstrated through a set of simulation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1325-1333
• /
• 2011

An analytical, numerical, and experimental comparison of the hydraulic and thermal performance of new vascular channels with semicircular cross sections was conducted. The following conditions were employed in the study: Reynolds number, 30-2000; cooling channels with a volume fraction of the cooling channels, 0.04; and pressure drop, $30-10^5$ Pa. Three flow configurations were considered: first, second, and third constructal structures with diameters optimized for hydraulic operations. To validate the proposed vascular designs by an analytical approach, 3-D numerical analysis was performed. The numerical model was also validated by the experimental data, and the comparison results were in excellent agreement in all cases. The validation study against the experimental data showed that compared to traditional channels, the optimized structure of the cooling plates could significantly enhance heat transfer and decrease pumping power.

• The KIPS Transactions:PartA
• /
• v.12A no.5 s.95
• /
• pp.441-450
• /
• 2005

As game markets are rapidly growing, the cost and period of game development are both increasing. These imply that the game development projects require more professional management of the project. Game mechanics is an algorithm of the gameplay on a specific game-platform. Game mechanics is concentrated on engineering elements of the game and its quality should be continuously managed from the design phase to the implementation phase. In the design phase, useful methods that can analyze the quality of game mechanics are the simulations. There are several simulation methods of the game mechanics but each method has limited use range because of its characteristics. In this Paper, we survey the game mechanics simulation methods and analyze the characteristics of each method. By the analyzed results, the Petri net model simulation method is good for analyzing total quality of no-error, optimization, and play-balance of the game mechanics but others are not.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.5
• /
• pp.408-413
• /
• 2006

We assessed the ability of a Pseudonocardia sp. from soil samples to bioconvert vitamin $D_3$. The optimal culture conditions for the bioconversion of vitamin $D_3$ to active $1{\alpha}$,25-dihydroxyvitamin $D_3$ were investigated by varying the carbon and nitrogen sources, the metal salt concentrations, the initial pH, and the temperature. Microbial transformations were carried out with the addition of vitamin $D_3$ dissolved in ethanol. They were sampled by extraction with methanol-dichloromethane and the samples were examined by HPLC. Optimum culture conditions were found to be 0.4% yeast extract, 1% glucose, 3% starch, 1% fish meal, 0.2% NaCl, 0.01% $K_2HPO_4$, 0.2% $CaCO_3$, 0.01% NaF, and pH 7.0 at $28^{\circ}C$. The optimal timing of the addition of vitamin $D_3$ for the production of calcitriol by Pseudonocardia autotrophica ID9302 was concurrent with the inoculation of seed culture broth. Maximum calcitriol productivity and the yield of bioconversion reached a value of 10.4mg/L and 10.4% respectively on the 7th day in a 75L fementer jar under the above conditions.

• KSBB Journal
• /
• v.27 no.6
• /
• pp.347-351
• /
• 2012

This study was conducted to optim ize the composition of CEM (cabbage extract medium) and cryoprotectants on the growth of Lactobacillus plantarum, a probiotics growing in plant and milk. For this, we analyzed the growth characteristics of Lb. plantarum in CEM and subsequently optimized the medium composition by addition of carbon, nitrogen sources and buffering agents. Among carbon sources, glucose showed the best result to increase the cell density after dilution of CEM. When 0.5% yeast extract and 1% soy peptone were supplemented in the diluted CEM, Lb. plantarum grew up to the maximum cell density. Addition of buffering agents in CEM was not significantly effective to increase the cell density. Meanwhile, addition of 12% skim milk, 5% sucrose and 0.5% glycerol showed a cryoprotective effect against cell damage of Lb. plantarum during freeze drying process showing high survival rate after 150 days. This optimized CEM can be used for economical production of bacterial cells particularly originated from a plant-related ecosystem.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.293-300
• /
• 2020

Eucheuma spinosum, red macro-algae, contains carrageenan as the major polysaccharide and is commercially produced in Indonesia, Malaysia, Philippines, China and Tanzania. In this study, E. spinosum was converted to sugar and platform chemicals (5-HMF, levulinic acid, formic acid) via FeCl₃-catalytic hydrothermal reaction. In addition, statistical methodology (3-level 3-factor Box-Behnken design) was applied to optimize and evaluate the effects of reaction factors (reaction temperature, catalyst concentration and reaction time). As a result of optimization, the concentration of 5-HMF was obtained to be 2.96 g/L at 160 ℃, 0.4 M FeCl₃ and 10 min. Optimal conditions of levulinic and formic acids were determined at 200 ℃, 0.6 M FeCl₃ and 30 min, and the concentrations were obtained to be 4.26 g/L and 3.77 g/L, respectively.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.266-272
• /
• 2020

In this study, the production of ethyl levulinate from chitosan using successive acid-catalyzed hydrolysis and esterification was investigated. To optimize and analysis the reaction factors and heir reciprocal interaction, response surface methodology was introduced. In the effect of water content in ethanol solvent, the production yield of ethyl levulinate was high at 5% water content (or 95% ethanol). As a result of optimization of reaction factors, 30.1% ethyl levulinate yield was obtained under the condition of 200 ℃, 3.19% chitosan, 0.49M sulfuric acid, 5% water content, and 58 min. Finally, the formation yield of ethyl levulinate was tended to enhance by increase of combined severity factor. This result indicated that the potential of chitosan as feedstock for production of chemicals and fuels.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.6
• /
• pp.231-236
• /
• 2014

The transit time of contrast agents and the parameters of time-intensity curves in ultrasonography are important factors to diagnose various diseases of a digestive organ. We have implemented an automatic parametric imaging method to overcome the difficulty of the diagnosis by naked eyes. However, the micro-bubble noise and the respiratory motions may degrade the reliability of the parameter images. In this paper, we introduce an optimization technique based on MRF(Markov Random Field) model to enhance the quality of the parameter images, and present an image tracking algorithm to compensate the image distortion by respiratory motions. A method to extract the respiration periods from the ultrasound image sequence has been developed. We have implemented the ROI(Region of Interest) tracking algorithm using the dynamic weights and a momentum factor based on these periods. An energy function is defined for the Gibbs sampler of the image enhancement method. Through the experiments using the data to diagnose liver lesions, we have shown that the proposed method improves the quality of the parametric images.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.139-151
• /
• 1992

A reservoir operation model was established under the varying restricted water level(r.w.l.) subject to the inflow distributions in flood period. The optimization model consists of 2 sub-models. One model minimizes deviations of releases from the expected release and the other minimizes capacity requirement for flood control. In order to make deterministic equivalents, the inflow distribution of reservoir is assumed to be 2-parameter Lognormal, and its parameters are estimated by the maximum likelihood method. The model is applied to joint operation of Soyang and Chungju dam. The results show that Soyang was designed for larger flood event than that for Chungju. The operation under the varying r.w.l. turns out to be more effective than one under the uniform r.w.l. Such effect is more obvious at Chungju compared with Soyang. Release pattern shows diminishing and delaying effect in a period of high inflows and larger discharges than actual in a period of low inflows.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.617-624
• /
• 2015

The conflict of opposing pedestrian traffic-flow in a subway station(made up of stair, passageway, and escalator) diminishes the convenience and mobility of its users. In addition, the station's efficiency would be negatively affected by the growth of delay and queue length in pedestrian facilities. As these phenomena have been resulted by the overlapping in pedestrian's traffic-line, the separation of it would alleviate these problems. For the criteria and methodology of separation, this paper has investigated the bi-directional queue length and delay on the entrance of each facility (stair, passageway and escalator). Since the pedestrian flow exists bidirectionally, we have used the weighted average by inflow rate for the delay value. For the optimization of the separation, the Genetic Algorithm has been utilized in order to minimize the delay.