• Journal of Engineering Education Research
• /
• v.10 no.1
• /
• pp.34-59
• /
• 2007

The purpose of this study was to analyse the correlation between students' perceptions on the achievement of program outcomes and grades. The subjects of this study were 4 programs at two engineering universities in Seoul. As a result, there is no significant correlation between students' self-assessment of the achievement of program outcomes and grades. Therefore, engineering colleges have to improve the way of assessing the students' achievement of program outcomes.

• Journal of Engineering Education Research
• /
• v.12 no.4
• /
• pp.63-74
• /
• 2009

The purpose of this study was to suggest to enable the development of lifelong learning skill through literature review on lifelong learning concept, educational method and objectives, factor of lifelong learning skill and case on foreign engineering colleges. Some strategies and implications were given to develop of lifelong learning skill of engineering college students. In the future, Applicable program is developed and needed for effective verification through demonstration research.

• Journal of Power System Engineering
• /
• v.17 no.2
• /
• pp.114-120
• /
• 2013

This study was carried out to investigate the relationship between mechanical properties and damping capacity in high manganese austenitic stainless steel with two phase mixed structure of reversed austenite and deformation induced martensite. Reversed austenite of ultra-fine grain size less than $0.3{\mu}m$ was obtained by reversion treatment. Two phase structure of deformation induced martensite and reversed austenite was obtained by annealing treatment at range of $500^{\circ}C{\sim}700^{\circ}C$ for various time in cold rolled high manganese austenite stainless steel. In stainless steel with two phase mixed structure of martensite and austenite, damping capacity decreased rapidly with the increasing hardness and strength. With the increasing elongation, damping capacity was increased rapidly and then, slowly increased.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.337-345
• /
• 2017

The sponge city construction is being carried out in China, and how to reasonably determine the scale of the sponge city facilities is a key point that the planners and designers should seriously solve. In this paper, taking determination of the sponge city facilities in a residential building in Shenzhen as an example, the layout and scales of the rainwater tanks, raingardens, ecological roofs and permeable pavements are decided by using the volumetric method and stormwater management model (SWMM). The calculated results by the two methods are compared and analyzed. The results show that the scales of the sponge city facilities determined by the two methods are almost the same, and it means that any method can be used to determine the scale of sponge city facilities. The volumetric method is relatively simple, and it is suggested to use to determine the scale of sponge city facilities during planning stage. While SWMM is more complex and requires a lot of input conditions, but it can provide the reduction effects of the sponge city facilities for rainfalls with different recurrence periods. Therefore, SWMM is recommended to use the calculation of the hydrological process of the sponge city facilities during the design stage.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.3
• /
• pp.211-216
• /
• 2016

Al alloys are useful materials having high specific strength and are used in machining of parts having thin-walled structures for weight reduction in aircraft, automobiles, and portable devices. In machining of thin-walled structures, it is difficult to maintain dimensional accuracy because machining deformation occurs because of cutting forces and heat in the cutting zone. Thus, cutting conditions and methods need to be investigated and cutting signals need to be analyzed to diagnose and minimize machining deformation and thereby enhance machining quality. In this study, an investigation on cutting conditions to minimize machining deformation and an analysis on characteristics of cutting signals when machining deformation occurs are conducted. Cutting signals for the process are acquired by using an accelerometer and acoustic emission (AE) sensor. Signal characteristics according to the cutting conditions and the relation between machining deformation and cutting signals are analyzed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.23 no.4
• /
• pp.325-329
• /
• 2014

This paper proposes a method to predict chatter vibration generated in milling processes and to enhance machining quality and surface finish. Chatter vibration is a common problem in the milling of thin walls and floors. It causes a poor surface finish, or even marks, to appear on the final machined surface. Therefore, an effective method is necessary to predict chatter vibration in machine tools. In this investigation, chatter vibration is measured by an accelerometer, microphone, and Acoustic Emission (AE) sensor in a machining operation. Based on the results of the experiment, a microphone can be applied for the prediction of chatter vibration in milling processes.

• Journal of Korea Foundry Society
• /
• v.27 no.4
• /
• pp.179-183
• /
• 2007

The TiC layer was formed on Ti and Ti alloys by plasma carburizing method. The main experimental parameters for plasma car boozing were temperature and time. XRD, EDX, hardness test and corrosion test were employed to analyze the evolution and material properties of the layer. The preferred orientation of TiC layers is (220) at treated temperature of $700^{\circ}C\;and\;880^{\circ}C$ However, it is changed to (200) at temperature of $800^{\circ}C$ The thickness of carbide layer increase with increasing carburizing temperature. Highest hardness of hardened layer formed on CP-Ti was obtained at the carburizing condition of processing temperature $880^{\circ}C$ and processing time 1080min. The corrosion potential of carburizing specimen was higher than untreated CP-titanium, and corrosion potential increased as carburizing temperature and time increased. Thus the corrosion resistance of CP-Ti was greatly enhanced after plasma carburizing treatment.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.85-93
• /
• 2009

This research is intended to grasp the characteristics of heat flow inside auxiliary power device engine room to obtain the design basic data through numerical analysis and experiment. For experiment cost reduction, numerical analysis was done to obtain quantitative data by observing the change in temperature distribution of major parts according to changes in normal condition, incompressible condition, engine surface heat emission rate and absorption temperature with the use of commercial STAR-CD. The experiment was done by grasping the temperature distribution of major interested parts inside engine room in loaded and unloaded conditions during engine operation. The temperature distribution data here will serve as useful design data during APU engine room designing.

• Journal of Digital Convergence
• /
• v.12 no.7
• /
• pp.77-83
• /
• 2014

Currently, a lot of colleges and universities offer Acoustics and audio engineering courses. In this paper, we analyze and classify the current state of the graduate level curriculums of the area. For the purposes, we focus on graduate school courses of the U.S. and Europe where audio engineering is highly advanced. They were classified into three different types depending on the educational objectives. In addition, the representative cases of each type are presented to examine the characteristics of the subjects.

• Journal of Engineering Education Research
• /
• v.18 no.6
• /
• pp.18-23
• /
• 2015

Nowadays, IT that leads information era is closely connected to our lives. The importance of training human resources for global empowerment on IT is being emphasized all over the world. With the growth of international society, the cultivation of global human resources now includes the cultivation of future human resources and the educations related with the career development program. However, the programs that colleges are operating for the cultivation of global human resources have been limited only to supporting the participation in international training program, operating camp and conferences, etc. On the contrary, to give many learners chances of experiencing courses for global empowerment and employment capability, We are operating the Internet of Everything online education program with Cisco Networking Academy Korea. Based on the management cases of Internet of Everything online education program, this thesis is suggesting a career program on global empowerment that many learners can experience, different from the limitation of the existing program.