• 제목/요약/키워드: energy yield

검색결과 1,904건 처리시간 0.032초

PEMFC에 사용되는 수소 생산 및 정화 기술 최적화 연구 (A study on the Optimization of Hydrogen Production and Purification System for PEMFC )

  • 고석균;이상용
    • 한국수소및신에너지학회논문집
    • /
    • 제34권1호
    • /
    • pp.1-7
    • /
    • 2023
  • A fuel handling process combined with a pressure swing adsorption system (PSA) was simulated to produce pure hydrogen with a purity greater than 99.97%. The simulation consists of two parts. The fuel processing part consisting of reformer and water-gas shift reaction was simulated with Aspen plus®, and the hydrogen purification part consisting of PSA was simulated with Aspen Adsorption®. In this study, the effect of reformer temperature and pressure on the total hydrogen production yield was investigated. Simulations were performed over a temperature range of 700 to 1,000℃ and a pressure range of 1 to 10 bar. The total hydrogen production yield increased with increasing temperature and decreasing pressure. The maximum hydrogen yield was less than 50% in the simulation and will be lower in the real process.

가새형 소성변형감쇠기의 설계 방법에 관한 연구 (Design of Energy Absorbing Braces)

  • 김진구;이강준
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2000년도 가을 학술발표회논문집
    • /
    • pp.265-272
    • /
    • 2000
  • Unbond brace hysteretic dampers are generally used to prevent or decrease structural damage in buildings subjected to strong earthquake by its energy dissipating hysteretic behavior. According to a previous research, the optimum ratio of device yield strength to story yield strength of the combined system has been identified as the most important parameter for characterizing the performance of this device. In this research, the validity and the applicability of the previous research has been investigated and a new approach has been proposed through earthquake response analysis of a steel structure installed with unbond brace type hysteretic damper.

  • PDF

Characteristics of Products in the Reaction 40 MeV/nucleon $^{14}N+Ag$

  • Chung, Yong-Hee;Porile, N. T.
    • Bulletin of the Korean Chemical Society
    • /
    • 제15권11호
    • /
    • pp.971-975
    • /
    • 1994
  • Cross sections and recoil properties have been measured for the fragments produced in the interaction of silver with 40 MeV/nucleon $^{14}N$ ions using off-line ${\gamma}$-ray spectroscopy. The data were used to obtain the isobaric-yield distribution, the mass yield distribution, and the fractional momentum transfer. The values of forward-to-backward ratios were measured to be very large, indicating that substantial momentum transfer occurs at this energy regime. The results are compared with other studies of the interaction of silver with intermediate-energy heavy ions.

Torrefaction and Hydrothermal Carbonization (HTC) of Dead Leaves

  • Saqib, Najam Ul;Park, Seong-Kyu;Lee, Jai-Young
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제19권5호
    • /
    • pp.45-52
    • /
    • 2014
  • Torrefaction and hydrothermal carbonization (HTC) are productive methods to reclaim energy from lignocellulosic biomass. The hydrophobic, homogenized, energy dense and carbon rich solid fuel can be obtain from torrefaction and hydrothermal carbonization. Dead leaves were carbonized in a stainless steel reactor of volume 200 ml with torrefaction ($250-270^{\circ}C$) for 120 minutes and hydrothermal carbonization ($200-250^{\circ}C$) for 30 minutes, with mass yield solid fuel ranging from 57-70% and energy content from 16.81MJ/kg to 22.01 MJ/kg compare to the biomass. The char produced from torrefaction process possess high energy content than hydrothermal carbonization. The highest energy yield of 89.96% was obtained by torrefaction at $250^{\circ}C$. The energy densification ratio fluctuated in between 1.15 to 1.30. On the basis of pore size distribution of the chars, the definition of the International Union of Pure and Applied Chemistry (IUPAC) was used as a classification standard. The pore diameter was ranging within 11.09-19 nm which play important role in water holding capacity in soil. Larger pores can hold water and provide passage for small pores. Therefore, it can be concluded that high pore size char can be obtained my HTC process and high energy content char of 22.01 MJ/Kg with 34.04% increase in energy can be obtain by torrefaction process.

Steam Reforming of Toluene Over Ni/Coal Ash Catalysts: Effect of Coal Ash Composition

  • Jang, Jinyoung;Oh, Gunung;Ra, Ho Won;Yoon, Sung Min;Mun, Tae Young;Seo, Myung Won;Moon, Jihong;Lee, Jae-Goo;Yoon, Sang Jun
    • Korean Chemical Engineering Research
    • /
    • 제59권2호
    • /
    • pp.232-238
    • /
    • 2021
  • The development of a low cost catalyst with high performance and small amount of carbon deposition on catalyst from toluene steam reforming were investigated by using coal ash as a support material. Ni-loaded coal ash catalyst showed similar catalytic activity for toluene steam reforming compared with the Ni/Al2O3. At 800 ℃, the toluene conversion was 77% for Ni/TAL, 68% for Ni/KPU and 78% for Ni/Al2O3. Ni/TAL showed similar toluene conversion to Ni/Al2O3. However, Ni/KPU produced higher hydrogen yield at relatively lower toluene conversion. Ni/KPU catalyst showed a remarkable ability of suppressing the carbon deposition. The difference in coke deposition and hydrogen yield is due to the composition of KPU ash (Ca and Fe) which increase coke resistance and water gas shift reaction. This study suggests that coal ash catalysts have great potential for the application in the steam reforming of biomass tar.

불포화 점성토의 등방압축 상태에서 발생하는 항복곡면과 경화감수 (Yield Surface and Hardening Laws of Unsaturated Clayey Soils for Isotropic Compression)

  • 송창섭
    • 한국농공학회지
    • /
    • 제39권1호
    • /
    • pp.93-101
    • /
    • 1997
  • This paper presents yield surfaces and hardening laws for describing the state of an unsaturated soil under isotropic compression and suction changes. The yield surface is formulated within the framework of hardening plasticity using two independent sets of stress variables : the excess of total stress over air pressure and the suction. And the application of the yield surfaces and hardening laws are confirmed from the result of the experiment. To this end a series of suction-controlled isotropic tests are conducted on clayey soils. Matric suction is controlled by the axis translation technique using high air entry ceramic disk. The specimens are compacted using a half of Proctor compaction energy with 5 % lower of water content than the optimum moisture contents. From test results, existence of the yield surfaces and an application of hardening laws to samples are confirmed by comparison between test and predicted results. And it is confirmed that LC yield locus is extened with the total plastic deformations induced by suction or stress changes, however, SI yield locus is only extended with the plastic deformations by induced suction changes.

  • PDF

혐기 발효 공정을 통한 음식물류 폐기물 탈리액으로부터 수소 생산 (Dark Fermentative Hydrogen Production using the Wastewater Generated from Food Waste Recycling Facilities)

  • 김동훈;이모권;임소영;김미선
    • 한국수소및신에너지학회논문집
    • /
    • 제22권3호
    • /
    • pp.326-332
    • /
    • 2011
  • The authors examined the effects of operating parameters on the $H_2$ production by dark fermentation of the wastewater generated from food waste recycling facilities, in short "food waste wastewater (FWW)". Central composite design based response surface methodology was applied to analyze the effect of initial pH (5.5-8.5) and substrate concentration (2-20 g Carbo. COD/L) on $H_2$ production. The experiment was conducted under mesophilic ($35^{\circ}C$) condition and a heat-treated ($90^{\circ}C$ for 20min)anaerobic digester sludge was used as a seeding source. Although there was a little difference in carbohydrate removal, $H_2$ yield was largely affected by the experimental conditions, from 0.38 to 1.77 mol $H_2$/mol $hexose_{added}$. By applying regression analysis, $H_2$ yield was well fitted based on the coded value to a second order polynomial equation (p = 0.0243): Y = $1.78-0.17X_1+0.30X_2+0.37X_1X_2-0.29X_1{^2}-0.35X_2{^2}$, where $X_1$, $X_2$, and Y are pH, substrate concentration (g Carbo. COD/L), and hydrogen yield (mol $H_2$/mol $hexose_{added}$), respectively. The 2-D response surface clearly showed a high inter-dependency between initial pH and substrate concentration, and the role of these two factors was to control the pH during fermentation. According to the statistical optimization, the optimum condition of initial pH and substrate concentration were 7.0 and 13.4 g Carbo. COD/L, respectively, under which predicted $H_2$ yield was 1.84 mol $H_2$/mol $hexose_{added}$. Microbial analysis using 16S rRNA PCR-DGGE showed that $Clostridium$ sp. such as $Clostridium$ $perfringens$, $Clostridium$ $sticklandii$, and $Clostridium$ $bifermentans$ were main $H_2$-producers.

감마선 조사가 미역귀 조다당의 추출수율 및 미백활성 변화에 미치는 영향 (Effects of Gamma Irradiation on the Extraction Yield and Whitening Activity of Polysaccharides from Undaria pinnatifida Sporophyll)

  • 김다미;김경희;성낙윤;정필문;김정수;김재경;김재훈;최종일;송범석;이주운;김진규;육홍선
    • 한국식품영양과학회지
    • /
    • 제40권5호
    • /
    • pp.712-716
    • /
    • 2011
  • 본 연구에서는 해조류에 대한 방사선의 영향 평가에 관하여 알아보기 위하여 감마선 조사된 미역귀로부터 추출된 조다당의 추출수율 및 미백활성에 관하여 관찰하였다. 미백활성은 melanin 합성에 중요하게 작용하는 tyrosinase 억제활성과 melanocyte의 melanin 생성 억제능을 평가하였다. 실험 결과, 방사선의 조사는 선량 의존적으로 조다당의 추출수율을 증가시키고, tyrosinase 억제 활성 및 ${\alpha}$-MSH로 melanin을 과생성 시킨 B16BL6 melanoma 세포내 melanin 생성 억제 활성을 유지시켜 주는 것으로 나타났다. 이러한 결과로 미루어 보아 감마선의 조사는 미백활성을 갖는 미역귀 조다당을 얻기 위한 효과적인 방법이며, 미백 산업 분야에서도 효과적으로 이용될 수 있을 것으로 사료된다.

PET 영상용 18F 표지 Isoquinolinium Salt의 합성 (Synthesis of 18F Labelled Isoquinoline Salt for PET Imaging)

  • 김희정;김동연;김인종;박정훈;이홍래;김상욱;허민구;최상무;양승대;유국현
    • 방사선산업학회지
    • /
    • 제4권1호
    • /
    • pp.1-6
    • /
    • 2010
  • The purpose of this study is to synthesize the radio fluorine labelled isoquinoline salt derivative as new radiopharmaceutical for imaging tumors using positron emission tomography (PET). The planarity of isoquinoline allows to inhibit topoisomerase or intercalate between adjacent DNA base pairs, which result in producing double strand breaks in the DNA and a cell death. Therefore, the isoquinoline has seemed to have a potential anticancer activity. In order to obtain 2-(5-[$^{18}F$]fluoropentylisoquinolinium salt with good radiochemical yield, tosylated precursors have been synthesized. The labelling reaction was carried out for 30 minute in HMPA at $120^{\circ}C$. The radiochemical yield was about 50~60%.