• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.7
• /
• pp.506-513
• /
• 2014

The objective of this study is to establish the greenhouse gases (GHG) inventories and estimate the GHG reduction plans for Daegu University from 2009 to 2011. The annual average of GHG emissions in Daegu University was estimated to be 19,413 ton $CO_2$ eq during the study period. Emissions of electricity usage in Scope 2 most contributed about 55.4% of the total GHG emissions. Also, GHG emissions of Scope 2, Scope 1, and Scope 3 contributed 60.4%, 22.6%, and 17.0%, respectively. In order to estimate reduction potential of GHG, the Long-range Energy Alternatives Planning (LEAP) model was calculated using three scenarios such as sensor installation, LED replacement, and solar facility. The GHG will be reduced by 1,656 ton $CO_2$ eq for LED scenario, by 1,041 ton $CO_2$ eq for sensor scenario, and by 737 ton $CO_2$ eq for solar scenario compared to 2020 business as usual (BAU). Therefore, the total GHG emissions in 2020 apply three scenarios can be reduced by 15% compared with 2020 BAU.

• Journal of Sasang Constitutional Medicine
• /
• v.23 no.3
• /
• pp.275-284
• /
• 2011

1. Objective: This literary review investigates Lee Jema's clinical experiences with Soyang-type patients and their influence on his conceptualization of the Soyang physiology and pathology. 2. Methods: 1) The case reports in "Soyang constitutional type: Spleen Cold-based Exterior-Cold disease" were compared before and after the Sinchuk revision to explore the temporal change in the Sasang medical concepts. 2) The texts in Donguisusebowon (Gabo edition) and Donguisusebowon (Sasangchobongwon) were analyzed to investigate the pathological concepts appearing before the completion of the Donguisusebowon (Gabo edition). 3) The texts in Donguisusebowon (Sinchuk edition) was analyzed to investigate the pathological concepts formed between the Gabo and Sinchuk editions of Donguisusebowon. 3. Results and Conclusions: 1) Gabo edition : The Gabo edition divided the External-origin Exterior disease into Cold-dominant (Heat-moderate) and Heat-dominant (Cold-moderate) patterns and differentiated the severity of Exterior-based Exterior disease and Interior-based Interior disease into mild, moderate, severe, and critical conditions. Cold-damage Delirium disease pattern was categorized as an Interior-based Interior disease, and the treatment protocol using Baekho-tang (Baihu-tang) was established. The stool condition and bowel movement reflecting the patient's defecation habits, the prime indicator of health in the Soyang constitutional type, were emphasized on their importance. 2) Sinchuk edition: The Delirium disease pattern was moved into the Exterior-cold disease, and the treatment protocol applying Jihwangbaekho-tang (Dihuangbaihu-tang) and Hyeongbangsabaek-san (Jingfangxiebai-san), with variational usage of Gypsum, was newly established. The Seong-Jeong and basal disease patterns were suggested as important factors in treating the patients. Also, it was proposed that the symptoms and signs reflecting the condition of the life-preserving energy be assessed to understand the patient's current condition. The importance of post-acute rehabilitation and aftercare as well as the most appropriate acute-stage treatment were emphasized.

• Journal of East-West Nursing Research
• /
• v.11 no.1
• /
• pp.33-41
• /
• 2005

This study was conducted to identify the effect of meridian acupressure on defecation of patients with post spinal operation. The nonequivalent control group posttest only design was used. The data were obtained from 77 post spinal operative patients, 34 in the experimental 43 in control group in Y Hospital, Seoul, Korea. The neurosurgical unit A and B ward, assigned by matched sample by the name of operation such as laminectomy and posterior lumbar interbody fusion are performed. Meridian acupressure meant the method that an examiner presses response points distributed in the pass of energy vessel. In this study, meridian acupressure program was performed on as points in order of Hegue (LI-4), Zhigou (TE-6), Zusanli (S-36), Shangjuxu (S-37), Xiajuxu (S-39), Tianshu (S-25), Taichong (L-3) which was known to be related to large intestine. Data were collected from 1, July 2003 to 1, September 2003. Meridian acupressure program was carried out for 20 minutes 4 hours after operation twice daily. In order to evaluate the effect of meridian acupressure intervention, they were asked time of bowel recovery, gas passing, and defecation though questionnaire method. Data were analyzed by the SPSS/ WIN 11.0 program. The results of this study were summarized as follows; 1. Homogeneity tests of general characteristics and operation related characteristics of the experimental group and the control group were performed. General characteristics included age, sex, defecation habit, eating pattern, fluid intake, life style, activity, usage of laxative and etc. 2. Hypotheses were verification as follows; 1) Recovery of bowel sound of the experimental group who received meridian acupressure intervention was faster than that of the control group after spinal operation (t=-6.770,P=.000). 2) Time of gas passing of the experimental group who received meridian acupressure program was faster than that of the control group after spinal operation (t=-8.003, P=.000). 3) Time to defecation of the experimental group who received meridian acupressure program was faster than that of the control group after spinal operation (t=-9.026, P=.000). 4) Abdominal discomfort due to defecation of the experimental group who received meridian acupressure program was lesser than that of the control group after spinal operation (t=-3.431, P=.001). From these results, meridian acupressure intervention was effective for recovery of bowel sound, reduce time to gas passing, time to defecation and lessen abdominal discomfort due to defecation on post spinal operative patients. And therefore this intervention can probably considered on clinical practice.

• Journal of architectural history
• /
• v.18 no.2
• /
• pp.47-63
• /
• 2009

This study focused on changes in form and spatial uses of Urban Hanok in Bukchon, Seoul. There are 10 representative cases which have been renovated through the policy of 'Preservation & Regeneration of Bukchon' by Seoul metropolitan government and other experts. Changes in form and spatial uses of Urban Hanok in Buckon are as follows. First, Changes of scale. Trough removing extension parts, facade of renovated Hanoks are 'transformed' into recovering their identity. Using basements or lofts, intensive application of spaces is transformation which promotes the vitality of Hanoks. Second, changes of space organization. As Hanok changes its function from residence to commercial or cultural use, il a1so changes space character or reorganizes space organization. It is important that deciding function of Hanok has to adjust its scale and organization. Third, changes of construction performance. Through introducing new material and constructing method, performance of wall has been changed respecting its wooden structure and interior-exterior figure. However, technical studies must back it up not to destroy its value of eco-friendly architecture. Fourth, changes of facility systems, like floor heating system. They changes floor level of Hanok equally, and then sections of Hanok have became simple. Furthermore, inserting new facility space, such as boiler room, stand-up kitchen, bathroom and toilet, organization of space also changed. It is necessary that wise alternative proposal through the method of transformation or mutation must be presented. These four changes can be classification into method of 'transformation' and 'mutation'. Changes of scale are method of transformation and changes of space organization are method of mutation. Also, while changes of construction performance are mutation, changes of facility systems are transformation. Recently, as price of lots have been increased, a lot of Hanoks have been commercialized. Thc commercial energy threat 'the identity of Bukchon as residential area'. From now on, to operate 'identity' and 'vitality' complementary, it is necessary to make up for the preservation policy of Hanok and consolidate renovating standards of Hanok which correspond to character of particular region and building usage.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.333-342
• /
• 2010

For the energy-saving production of fresh vegetables in poor environment such as the Antarctic, a container-type plant factory was designed and developed. To maximize space usage of the 20 feet container ($L5.9m{\times}W2.4m{\times}H2.4m$), a three-level hydroponic cultivation system was installed and the nutrient solution was supplied by bottom watering. Using this system, 3 lettuce cultivars were grown under different the light source (light intensity). After 2 weeks from the transplanting, fluorescent lamp ($145\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) showed the best fresh weight of top part and leaf area. However, After 4 weeks, fluorescent lamp plus metal halide lamp ($150\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) led to the optimum growth of the each lettuce cultivar. The cultivar, 'Cheongchima', showed the best fresh weight of top part and leaf area, followed by 'Jeokchukmyeon' and 'Lollo rosa'. The chlorophyll concentrations (SPAD) showed no significant difference among the sources of lights. However, 'Cheongchima' showed relatively high chlorophyll concentration. With the above results, we found that the growth of lettuce is depend on light intensity and even at same intensity, the growth is different among the cultivars. Therefore, the selection of optimum cultivar should be considered in the plant factory system that has only weak light density.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.581-588
• /
• 2018

In this article, electrochemical investigation of the transfer reaction of ionizable cefotiam (CTM), an antibiotic molecule across a polarized water/1,2-dichloroethane (water/1,2-DCE) interface was studied. Ion partition diagram providing the preferred charged form of CTM in either water or 1,2-DCE phase was established via the voltammetric evaluation of the transfer process of differently charged CTM species depending upon the pH variation of aqueous solutions. Thermodynamic information including the formal transfer potential and formal Gibbs transfer energy values in addition to important pharmacokinetics including partition coefficients of ionizable CTM were also evaluated. In particular, the current associated with the transfer of CTM present at pH 3.0 aqueous solution proportionally increased with respect to the CTM concentration which was further used for developing CTM sensitive ion sensor. In order to improve the portability and convenient usage, a single microhole interface fabricated in a supportive polyethylene terephthalate film was used of which hole was filled with a polyvinylchloride-2-nitrophenyloctylether (PVC-NPOE) gel replacing 1,2-DCE, a toxic organic solvent. A dynamic range of $1-10{\mu}M$ CTM was obtained.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.7
• /
• pp.52-60
• /
• 2010

In this paper, we propose a dynamic power management framework for multi-core systems. We reduced the power consumption of multi-core processors such as Intel Centrino Duo and ARM11 MPCore, which have been used at the consumer electronics and personal computer market. Each processor uses a different technique to save its power usage, but there is no embedded multi-core processor which has a precise power control mechanism such as dynamic voltage scaling technique. The proposed dynamic power management framework is suitable for smart phones which have an operating system to provide multi-processing capability. Basically, our framework follows an intuitive idea that reducing the power consumption of idle cores is the most effective way to save the overall power consumption of a multi-core processor. We could minimize the energy consumption used by idle cores with application-targeted policies that reflect the characteristics of active workloads. We defined some properties of an application to analyze the performance requirement in real time and automated the management process to verify the result quickly. We tested the proposed framework with popular processors such as Intel Centrino Duo and ARM11 MPCore, and were able to find that our framework dynamically reduced the power consumption of multi-core processors and satisfied the performance requirement of each program.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.413-413
• /
• 2014

In this paper, we present a fabrication method of functionalized gold nanostructures on flexible substrate that can be implemented for plasmonic sensing application. For biomolecular sensing, many researchers exploit unconventional lithography method like nanoimprint lithography (NIP), contact transfer lithography, soft lithography, colloidal transfer printing due to its usability and easy to functionalization. In particular, nanoimprint and contact transfer lithography need to have anti-adhesion layer for distinctive metallic properties on the flexible substrates. However, when metallic thin film was deposited on the anti-adhesion layer coated substrates, we discover much aggravation of the mold by repetitive use. Thus it would be impossible to get a high quality of metal nanostructure on the transferred substrate for developing flexible electronics based transfer printing. Here we demonstrate a method for nano-pillar mold and transfer the controllable nanoparticle array on the flexible substrates without an anti-adhesion layer. Also functionalization of gold was investigated by the different length of thiol applied for effectively localized surface plasmonic resonance sensing. First, a focused ion beam (FIB) and ICP-RIE are used to fabricate the nanoscale pillar array. Then gold metal layer is deposited onto the patterned nanostructure. The metallic 130 nm and 250 nm nanodisk pattern are transferred onto flexible polymer substrate by bi-layer functionalized contact imprinting which can be tunable surface energy interfaces. Different thiol reagents such as Thioglycolic acid (98%), 3-Mercaptopropionic acid (99%), 11-Mercaptoundecanoic acid (95%) and 16-Mercaptohexadecanoic acid (90%) are used. Overcoming the repeatedly usage of the anti-adhesion layer mold which has less uniformity and not washable interface, contact printing method using bi-layer gold array are not only expedient access to fabrication but also have distinctive properties including anti-adhesion layer free, functionalized bottom of the gold nano disk, repeatedly replicate the pattern on the flexible substrate. As a result we demonstrate the feasibility of flexible plasmonic sensing interface and anticipate that the method can be extended to variable application including the portable bio sensor via mass production of stable nanostructure array and other nanophotonic application.

• Korean Journal of Community Nutrition
• /
• v.21 no.2
• /
• pp.190-199
• /
• 2016

Objectives: The purpose of this study was to identify the differences in nutrient intake according to using diuretics, symptom severity and degree of physical functioning in heart failure patients. Methods: A secondary data analysis was conducted by using baseline data of an intervention study for heart failure patients. In this study, 131 heart failure patients were included. Data were collected using medical records, NYHA (New York Heart Association functional classification) class, and 6-minute-walking test and 24-hour diet recall. Data were analyzed using descriptive statistics and Chi-square test by SPSS 21.0. Nutrient intake was assessed using CAN-pro 2.0. Results: Majority of the participants consumed total calorie less than Estimated Energy Requirement (EER) and consumed carbohydrates more than 65% of their total calorie intakes. 24.4% of the participants consumed fat more than 30% of their total calorie intakes and 23.7% consumed saturated fat more than 7% of their total calorie intakes. 100.0% of the participants consumed protein less than 7% of their total calorie intakes and 73.3% of the participants consumed more than recommended intakes of sodium. More than 90.0% of the participants consumed less than adequate intakes of potassium (90.1%) and Vitamin D (91.6%), respectively. 100% and 62.6% of the participants consumed less than Estimated Average Requirement (EAR) of magnesium and Vitamin $B_1$, respectively. Nutrient intakes in heart failure patients were different for potassium intake according to the usage of diuretics. The participants with symptom severity tended to intake protein less properly and the participants walking more than 300.0 m tended to intake sodium improperly high. Conclusions: The findings of this study indicated the need for screening nutrient intakes of heart failure patients. It is necessary to increase the intake of total calories and most nutrients and to restrict sodium intakes among heart failure patients.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.46-56
• /
• 2018

This paper aimed to identify main factors of community characters, which have an effect on the land surface temperature(LST) change and estimate the impacting coefficient(ratio) of factors in a significant level of statistics. Chungcheongbuk-do province was selected and then partitioned into city and county areas for the sake of convenience of modeling. LST time series data and the community character data were developed based on Terra Satellite MODIS data and collected from the National Statistical Office, respectively. By the cause and effect relationship between community characters and LST, regression coefficients were estimated using a penal model. In a panel modeling, LST and community characters were used as a dependent variable and explanatory variables, respectively. Panel modeling analysis was carried out using statistical package STATA14 and one-way fixed effect model was selected as the most suitable model to evaluate the regression coefficients in the study area. The impacting ratio of LST change by any explanatory variable derived from the regression coefficients of the panel model fixed. Impacting ratios for industrial areas, elevation ${\times}$ building, energy usage, average window speed, non-urban management area, agricultural, nature and environmental conservation, average precipitation were 3.746, 2.856, 2.742, 0.553, 0.102, 0.071 and 0.003, respectively.