• 에너지공학
• /
• 제23권2호
• /
• pp.175-182
• /
• 2014

신재생에너지 분야 중 특히 태양에너지를 이용하는 분야는 자원의 무한 및 청정성 때문에 그 사용량이 증가 추세에 있다. 우리나라에서 태양열에너지의 이용률이 전체 에너지 사용량 중 아직 미미한 실정이지만, 근래 정부의 정책적 지원에 힘입어 이 분야에 대한 연구가 활발히 이루어지고 있다. 본 연구는 외부 날씨의 영향을 받지 않고 실내에서 안정적으로 태양열집열기에 관한 실험을 수행할 수 있는 태양열집열기 성능검사 시스템을 구축하고 또한 새로운 형태의 열사이폰관형 태양열집열기를 연구 개발하여 기존의 이중진공관형 태양열집열기와 집열효율을 비교하고자 하였다. 그 결과 할로겐 램프를 이용한 실내 측정의 경우, 열사이폰관형 태양열집열기의 집열효율이 이중진공관형 태양열집열기보다 120분 직후 약 15~22% 증가하였다. 또한 실제 태양을 이용한 실외 측정의 경우도 열사이폰관 형 집열기가 이중진공관형 집열기보다 최대 약 46% 높았다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권2호
• /
• pp.117-127
• /
• 2013

In this paper, we studied the correlation between the activation energy($E_a$) of the raw materials and the structural characteristics of the White LED PKGs. The samples used in the study were composed of low power LED 3type and high power LED 5type. To calculate the activation energy($E_a$) of the White LED PKGs conducted three conditions of high temperature operation test based on the Arrhenius model. The number of samples used in the experiment is 10, respectively. The $T_j$ of Conditions and target specifics expressed $T_{j1}$, $T_{j2}$, $T_{j3}$. The activation energy ($E_a$) of the samples was calculated based on the value of the actually measured lifetime. We investigated the correlation between the activation energy ($E_a$) of the raw materials and the structural characteristics of the White LED PKGs. As a result, White LED PKGs activation energy($E_a$) value was confirmed that the material properties affected more than the structural characteristics of the LED PKGs and we found that activation energy of each LED Model has difference. Normally, The activation energy of phosphor of YAG type was indicated from 0.21 to 0.25[eV] and Silicate type was indicated from 0.12 to 0.16[eV]. According to the results, we confirmed that the activation energy of phosphor of YAG type is higher more than The activation energy of phosphor of Silicate type.

• 대한가정학회지
• /
• 제20권4호
• /
• pp.113-124
• /
• 1982

We have investited on the efficiency of the electric vacuum cleaners for household use. On this experiment, we have used the Expired Gas Analyer IHO6(SAN-EI, K.K) to get energy expenditure of house cleaning. The testing items are, (1) The difference of energy expenditure of cleaning for the each types of the test floors: Which are P-tile, Tatami, and 4 kinds of carpets. (2) The energy expenditure of cleaning for the room with a given quantity of furnitures: The volumes of furnitures are 0, 3, 10, 20% of the room with 2 kinds of chair. The results of the experiments are as follows. 1. The energy expenditure of cleaning for the types of test floors: Setting the energy expenditure on the basis of P-tile, Tatami needs 20~24% energy expenditure than P-tile, and carpet needs 60~64% energy expenditure than P-tile. 2. Cleaning time: The more the room has many furnitures, the more it takes longer. The types of vacuum cleaners, the Shoulder-type cleaner needs 1.19 times of the Upright-type, and the Cylender-type needs 1.08 times of the Upright-type. 3. The energy expenditure of cleaning for a given quantity of furnitures: The more the rooms has many furnitures, the more the energy expenditure increase. A 10% (20%) increases in the volume of the furniture causes a 100% (200%) increases in the energy expenditure of vacuum cleaners.

• 상하수도학회지
• /
• 제31권1호
• /
• pp.13-19
• /
• 2017

Relatively low efficiency in anaerobic digestion process is mainly caused by unproper mixing method. In this study, tray motion type agitator was applied in actual anaerobic digestion tank in order to improve the digestion efficiency, equalize the flow velocity distribution and energy saving. The impeller of tray motion type agitator was reciprocated vertically. Gas lift type agitator and tray motion type agitator appears almost same mixing efficiency include digestion rates. However, tray motion type agitator have shown that lower energy consumption compared to the conventional gas lift type agitator. Implementation of tray motion type agitator in the anaerobic digestion tanks contributed to the stabilization of mixing environment, efficiency and energy efficiency of the tank.

• 한국조경학회지
• /
• 제13권1호
• /
• pp.25-42
• /
• 1985

The objective of this article is to develop residential site planning techniques for the energy conservation by focusing on energy conscious site design process, influencing natural factors for energy conservation and suggestion of multi - family housing Prototypes. This article is the second part of the article titled "A Study on an Energy - Effective Site Planning for a Residential Environment"which is published in the previous issue (Vol. 12, No. 2) of this journal. The first part of the article dealt with how to make best use of energy conserving effect of natural forces such as sun, wind and water, and the selection techniques of suitable residential site for achieving energy conservation. The second part proposes the energy conscious design process of residential site development and suggests building forms of single family and multi -family housings. The three multi - family housing prototypes haute been developed which are most energy -effective ; the linear type, the cut -de -sac type and the atrium type. In the process of creating the prototypes, energy conserving design criteria have been also developed. These criteria can be used to develop some other alternative prototypes.

• 한국전기전자재료학회논문지
• /
• 제27권12호
• /
• pp.857-862
• /
• 2014

In this paper, we designed and fabricated electromagnetic induction based scaffold type energy harvester. For energy harvesting, mechanical energy of vertical motion is transferred to rotational energy using rack gear and multiplying gear was used to maximize energy transfer. To optimize design parameters, physical structure of energy harvester was modeled using finite element method. The effect of multiplying gear ratio and frequency levels of applied mechanical energy on energy generation efficiency are analyzed by computer simulation and experimental test. Experimental results showed that maximum 25.36 W of electric power can be achieved at the frequency of 2 Hz and 1:77 of gear ratio with only 5 mm of vertical changes on scaffold structure.

• 에너지공학
• /
• 제20권4호
• /
• pp.286-291
• /
• 2011

하이브리드 자동차는 전기방식 회생제동을 이용하여 연비가 우수하다. 본 논문에서는 새로운 공압식 회생제동 장치를 소개하였다. 공압식 회생제동장치는 압축과 팽창기능을 동시에 가지는 스크롤 기구를 이용한다. 차량 감속시에는 스크롤 기기는 압축기로 작동되면서 대기중의 공기를 압축하여 압축탱크에 저장한 후 차량 가속시에는 스크롤기구가 팽창기로 작동되면서 탱크에 저장된 압축공기가 차량 운동에너지로 활용된다. 회생제동장치를 사용함으로써 개선되는 연비를 분석하기 위해, CVS-75 모드 주행조건에서 시뮬레이션을 수행하였다.

• 복합신소재구조학회 논문집
• /
• 제1권1호
• /
• pp.16-26
• /
• 2010

In this paper, we present the result of investigations pertaining to the development of the floating type photovoltaic energy generation system. Pultruded FRP has superior mechanical and physical properties compared with those of conventional structural materials. Since the FRP has an excellent corrosion-resistance and high specific strength and stiffness, the FRP material may be highly appreciated for the development of the floating type photovoltaic energy generation system. In the paper, we discussed the development concepts of the floating type photovoltaic energy generation system, briefly. The mechanical properties of the FRP structural member used in the development are investigated through the tensile and compression tests. Test results are used in the finite element analysis and the design of the system. In addition, bolted connections of the members are briefly discussed and the strengths of FRP bolted connections are estimated based on the results of experiments. The experimental results are compared with the finite element analysis results and discussed briefly. The floating type photovoltaic energy generation system is designed, fabricated, and installed successfully in site.

• 한국주거학회논문집
• /
• 제20권4호
• /
• pp.19-29
• /
• 2009

The purpose of this study is to evaluate the air diffusion performance of a range of indoor units for room airconditioners; the wall-mounted type, floor-standing type, and ceiling-mounted type. These types of units, which have been widely used in housing spaces, will be studied with respect to thermal comfort and the energy performance using CFD analysis. In this study, current air conditioning status and related problems in housing spaces are examined, and a CFD analysis is performed in order to compare and analyze the thermal comfort and energy efficiency across each type of indoor-unit using the PMV, ADPI, EUC and FCEI indexes. The analysis results collectively considering thermal comfort and energy performance indicated that the ceiling-mounted type 4-way indoor unit showed the best diffusion performance in terms of thermal comfort, and had the second best diffusion performance in terms of energy performance after the wall-mounted type under certain conditions.

• 신재생에너지
• /
• 제10권4호
• /
• pp.29-35
• /
• 2014

Non-used waste heat has recently been paid special attention due to several global warming regulation and energy cost rising. In this study, therefore, thermal energy storage system which uses a solid type heat media has been investigated about the possibility of heat accumulation and heat release for thermal energy storage system. 35kWh of bench-scale thermal storage system was used to investigate the characteristics of the solid type heat media. From the result, it is shown that a solid type heat media should be divided to supply constant heat to the customers' side. It is also shown the flow direction should be considered to reduce temperature difference between top and bottom sides in the thermal storage system.