• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1203-1208
• /
• 2010

Recently, there are environmental issues for sustainable transportation system to pursue the energy-efficient and environment-friendly public urban transit. These transportation system needs to offer demand-oriented high-quality service being on the same level with cab service for urban space. PRT(Personal Rapid Transit), small track-guided vehicle, is repeatedly mentioned as a possible alternative for the new urban public transportion system, but but there are not many researches on the operational optimal routing for PRT network. In this paper, the concept of PRT and general optimal routing methods are reviewed. And we suggest the optimal routing method for city-wide PRT network with multi-vehicles and stations, junctions and directional arcs. Futher research directions for PRT routing are presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.05a
• /
• pp.760-761
• /
• 2010

As is widely known, SPL measurement using sound level meter (SLM) is limited to higher than 30 dBA, because of the self-noise n(x) of condenser microphone (CM). The authors confirmed n(x) is composed of 3 kinds, each of which is stable enough under the condition -20 ~ +50 deg C to eliminate the influence of n(x) by subtracting its energy from the squared input signal in the integration process, as well as to develop new type of SLM with ultra-low SPL measuring function. This is so-called "0-dB SLM" since it enables to measure SPL down to around 0 dB-SPL. The RMS of n(x) is acquired and stored in ROM in advance, by placing CM in the supersilent space or by using dummy microphone with equivalent capacitance before the actual measurements.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.11 s.176
• /
• pp.151-158
• /
• 2005

Micro-machine tool is essential in the micro/meso cutting for the sake of saving of space, resources, and energy. In this research, a micro-turning lathe was fabricated with piezoelectric feed drive mechanism, and motion of each axis was generated by stepwise mechanism with two piezo actuators. The resolution to drive the axis was $0.05{\mu}m$ and position accuracy less than $2{\mu}m$ was assured. From the positioning experiment, piezo feed mechanism is good enough for the micro machine tools. Many fuming experiments were carried out with diamond-cutting tools to evaluate cutting capability of a machine tool. Continuous flow type chip could be obtained even if the cutting speed was very low due to small diameter of workpiece. However, thorough investigation about machineability in micro/meso cutting is inevitable to assure high quality surface roughness in micro machine tool.

• Journal of The Korean Astronomical Society
• /
• v.49 no.4
• /
• pp.127-136
• /
• 2016

We investigate optical properties of amorphous alumina (Al2O3) dust grains in the envelopes around O-rich asymptotic giant branch (AGB) stars using laboratory measured optical data. We derive the optical constants of amorphous alumina over a wide wavelength range that satisfy the Kramers-Kronig relation and reproduce the laboratory data. Using the amorphous alumina and silicate dust, we compare the radiative transfer model results with the observed spectral energy distributions. Comparing the theoretical models with observations on various IR two-color diagrams for a large sample of O-rich AGB stars, we find that the amorphous alumina dust (about 10-40%) mixed with amorphous silicate better models the observed points for the O-rich AGB stars with thin dust envelopes.

• Journal of The Korean Astronomical Society
• /
• v.40 no.4
• /
• pp.113-118
• /
• 2007

Recently far infra-red (FIR) polarization of the $850{\mu}m$ continuum emission from T Tauri disks has been detected. The observed degree of polarization is around 3 %. Since thermal emission from dust grains dominates the spectral energy distribution at the FIR regime, dust grains might be the cause of the polarization. We explore alignment of dust grains by radiative torque in T Tauri disks and provide predictions for polarized emission for disks viewed at different wavelengths and viewing angles. In the presence of magnetic field, these aligned grains produce polarized emission in infrared wavelengths. When we take a Mathis-Rumpl-Nordsieck-type distribution with maximum grain size of $500-1000{\mu}m$, the degree of polarization is around 2-3 % level at wavelengths larger than ${\sim}100{\mu}m$. Our study indicates that multifrequency infrared polarimetric studies of protostellar disks can provide good insights into the details of their magnetic structure.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.70.2-70.2
• /
• 2010

We present near- and mid-infrared images of the Crab Nebula, taken with the Infrared Camera (IRC) onboard the AKARI infrared space telescope. These images have a field-of-view of 10'*10' and show the full extent of the nebula at 3, 4, 7, 11, 15, and 24 um. The Crab nebula in near infrared is dominated by synchrotron emission while, in mid infrared, the ionic forbidden lines of Ar, Ne, S, and Fe makes significant contribution. We separate the line emission from synchrotron emission in 3-15 um AKARI bands using the ISOCAM CVF data, and present separate images for the line and synchrotron emissions in each band. We derive the total synchrotron fluxes of the Crab nebula in these bands, which are used to complete the synchrotron spectral energy distribution of the Crab nebula from radio to X-rays. We discuss the spectral variations of the Crab nebula.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.72.1-72.1
• /
• 2018

Recently, an analysis of 3-micron spectra of CH4 line emission from our Gemini/GNIRS observations of Jupiter's polar regions yielded an unexpected result: The homopause (~1 microbar pressure level) located directly above the long-lasting 8-micron CH4 north-polar hot spot (Great 8-micron Hot Spot: GHS) is cool compared with the temperatures of nearby auroral regions (Kim et al. 2017). Most of the 8-micron emission of the GHS originates from CH4 at the ~1 mbar level (i.e., deeper in the stratosphere, where cooling time is several years), much longer than at the altitude of the homopause. We propose a mechanism to explain the temperature difference: locally-fixed and transient, but energetic auroral particles, which can penetrate to the 1 mbar level and deposit energy there creating and maintaining the GHS. For Saturn, thus far we have not detected distinctive 8-micron nor 3-micron CH4 hot spots in the polar regions. We will present a possible implication for this difference between Jupiter and Saturn.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.15-23
• /
• 1999

Active damping system is generally used for the vibration suppression and precise motion control for the flexible structure. This application can be easily found on the space structure and driving mechanism of optical storage devices. Although a control system using the flexible structure has many advantages over using rigid mechanism in driving energy saving, system weights, and etc., more complex and precise control strategies are required. A position control system using flexible structure and the concept of active damper is designed and manufactured, which is driven by slide DC motor and moving coil motor located at the tip of the flexible beam. Dynamic characteristics of this system are investigated by analytic and experimental ways. By the comparison of those two results, a nominal reference model for this system is proposed.

• Korean Institute of Interior Design Journal
• /
• no.41
• /
• pp.236-245
• /
• 2003

Environment friendly architecture, which will reduce shortcomings of current architectural culture, can be achieved by using natural energy and environment friendly building materials together with their environmental architecture techniques. Particularly, even though the overall building system is perfect, it cannot be considered as comfortable architectural space if the materials are polluted, harmful to human bodies and producing wastes. Therefore, in order to build environment friendly architecture, the selection of the materials is very important and necessary from the planning stage with careful reviews and concern. This study tries to define what the environment friendly materials we, to investigate and to classify them, in order to provide some guidelines for selecting them at plans to build. For examples, the materials can be classified into natural materials, continuously usable materials, recycled materials from wastes, and less polluting materials mixed with natural materials. Finally, this study reviews the existing products in the market and proposes to develop new ones in the future. It will present the circulation of resources in the 21century through recycled and reused materials.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2309-2310
• /
• 2008

The surface made of dielectric materials can therefore become probable sites for damaging electrostatic discharges. Thanks to a specially equipped chamber, the spatial environment can be reproduced experimentally in the laboratory. In this paper, the behavior of high energy electrons injected in polymers such as PolyMethylMetaAcrylate (PMMA) and Kpton is studied. Results obtained by surface potential technique, pulse-electro acoustic device and a cell based on the split Faraday cup system are analyzed and discussed.