• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.697-703
• /
• 2023

As a part of the global industrial efforts to reduce environmental pollution owing to air pollution, regulations have been established by the International Maritime Organization (IMO). The IMO has implemented various regulations such as EEXI, EEDI, and CII to reduce air pollution emissions from ships. They are also promoting measures to decrease the power consumption in ships, aiming to conserve energy. Most of the power used in ships is consumed by electric motors. Among the motors installed on ships, the engine room blower that takes up a significant load, operates at a constant irrespective of demand. Therefore, energy savings can be expected through frequency control. In this study, we demonstrated the efficacy of energy savings by controlling the frequency of the electric motor of the generator blower that supplies combustion air to the generator's turbocharger. The system was modeled based on the output data of the turboharger outlet temperature in response to the blower frequency inpu. A PI control system was established to control the frequency with the target being the turbocharger outlet temperature. By maintaining the turbocharger design standard outlet temperature and controlling the blower frequency, we achieved an annual energy saving of 15,552kW in power consumption. The effectiveness of energy savings through frequency control of blower fans was verified during the summer (April to September) and winter (March to October) periods. Based on this, we achieved annual fuel cost savings of 6,091 thousand won and reduction of 8.5 tons of carbon dioxide, 2.4 kg of SOx, and 7.8 kg of NOx air pollutants on the training ship.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1992.11a
• /
• pp.64-68
• /
• 1992

The demand for home automation system has increased in high-rise apartment houses. Home automation system is realized a more comfortable, more secure, more economical, more convenient, and more satisfying home life. The proposed system functions are meter reading, home security, energy saving, and house control. The technical requirements and configuration of home automation system are provided.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1989.10a
• /
• pp.59-64
• /
• 1989

Daylight is regarded by most people as preferred light source for interior lig-hting. With poper design, daylight can save electric lighting during daytime. This paper attemptes to show that bett-er use of daylight might be the balanced use of supplementary artificial lighting at times and places where the natural 1-ighting is inadequate with consequent c-ost and energy saving.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.31 no.7
• /
• pp.25-30
• /
• 1982

This paper considered the energy saving problem of D.C. motor in arbitrary load condition. We can improve efficiency by maintaining the proper ratio of armature current/field current. First, the condition of maximizing the efficiency was obtained, and then the real time control was implemented by using microprocessors. As a result, the efficiency was improved in spite of constant output. For example, the efficiency at 1/5 load was improved from 56.7% to 80%.

• Journal of KIISE:Information Networking
• /
• v.32 no.2
• /
• pp.180-189
• /
• 2005

This paper describes a transmission power control method for power saving in 802.11b wireless LANs. We have first explored how much effects reducing transmission power has on communication performance. Then we propose a power control algorithm, whose approach is similar to that of TCP congestion control, determining an appropriate transmission power level by monitoring the retransmission rate. We have implemented an utility software on a Linux-based system and made several experiments to validate the proposed method. The results show that it is possible to save energy consumption by controlling transmission power without sacrificing communication performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.4
• /
• pp.313-320
• /
• 2011

Multi-axle driving vehicles that are used in special environments require high driving performance, steering performance, and stability. Among these vehicles, 6WS/6WD vehicles with middle wheels have structural safety by distributing the load and reducing the pitch angle during rapid acceleration and braking. 6WS/6WD vehicles are favored for military use in off road operations because of their high maneuverability and mobility on extreme terrains and obstacles. 6WD vehicles that using in-wheel motor can generate the independent wheel torque without other mechanical parts. Conventional vehicles, however, cannot generate an opposite driving force at each side wheel. Using an independent steering and driving system, six-wheel vehicles can show better performance than conventional vehicles. Using of independent steering and driving system, the 6 wheel vehicle can improve a performance better than conventional vehicle. This vehicle enhances the maneuverability under low speed and the stability at high speed. This paper describes an independent 6WS/6WD vehicle, consists of three parts; Vehicle Model, Control Algorithm for 6WS/6WD and Simulation. First, vehicle model is application of TruckSim software for 6WS and 6WD. Second, control algorithm describes the optimum tire force distribution method in view of energy saving. Last is simulation and verification.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.20-28
• /
• 2008

It is prevalent to research on the energy saving systems using daylight. Daylight responsive dimming systems are to automatically control lighting output by available daylight for maintaining target illuminance on the workplane. The system application is not popular because of blocked daylight by shading systems. Automated roller shading systems automatically control shade height by sun position and sky conditions. Both daylight responsive dimming systems and automated roller shading systems should be integrated for energy savings and visual luminous environment. In this research, software are developed and integrated for control of integrated systems.

• Journal of Power Electronics
• /
• v.5 no.1
• /
• pp.45-54
• /
• 2005

This paper presents an application of SR drives for LSEV's(Low Speed Electric Vehicles) which are used for golf and leisure. Two types of 5[HP] SRM's and its drive system are designed and tested. In order to be energy saving and have effective braking during deceleration, a multi-level inverter is proposed. For the precise switching angle control, a new type of analog encoder is proposed. A current control is adopted for soft starting and an angle control is adopted at high speed to increase efficiency. Drive characteristics and performance are shown with test results.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.113-118
• /
• 2010

In this paper, We proposed remote dimming control system for Light Emitting Diode(LED) street light using Power Line Communication(PLC). LED will be used widly by indoor or outdoor lighting because of semi-permanent life and environment restriction. For energy saving of street light, the dimming control system is very necessary and the PLC is a very efficient technique. Thus, in this paper we proposed the remote dimming control system for LED street light using PLC. A performance of the proposed system was validated by experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.47.4-47
• /
• 2001

The automatic-driverless operation, a very important technique for metro railways, is necessary for achieving higher safety, greater reliability, and bigger transport capacity. To achieve these things, we have to build up the system design and tasting techniques for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems should interface not only with each other but also between the sub-systems and the signal system on the ground. For the saving of energy, we designed coasting strategy of ATO system, In this paper, we developed ATO system and tested on the test line and ...