• Economic and Environmental Geology
• /
• v.56 no.5
• /
• pp.603-618
• /
• 2023

This study focused on evaluating the suitability of the WRK (waste repository Korea) bentonite as a buffer material in the SNF (spent nuclear fuel) repository. The U (uranium) adsorption/desorption characteristics and the adsorption mechanisms of the WRK bentonite were presented through various analyses, adsorption/desorption experiments, and kinetic adsorption modeling at various pH conditions. Mineralogical and structural analyses supported that the major mineral of the WRK bentonite is the Ca-montmorillonite having the great possibility for the U adsorption. From results of the U adsorption/desorption experiments (intial U concentration: 1 mg/L) for the WRK bentonite, despite the low ratio of the WRK bentonite/U (2 g/L), high U adsorption efficiency (>74%) and low U desorption rate (<14%) were acquired at pH 5, 6, 10, and 11 in solution, supporting that the WRK bentonite can be used as the buffer material preventing the U migration in the SNF repository. Relatively low U adsorption efficiency (<45%) for the WRK bentonite was acquired at pH 3 and 7 because the U exists as various species in solution depending on pH and thus its U adsorption mechanisms are different due to the U speciation. Based on experimental results and previous studies, the main U adsorption mechanisms of the WRK bentonite were understood in viewpoint of the chemical adsorption. At the acid conditions (＜pH 3), the U is apt to adsorb as forms of UO₂²⁺, mainly due to the ionic bond with Si-O or Al-O(OH) present on the WRK bentonite rather than the ion exchange with Ca²⁺ among layers of the WRK bentonite, showing the relatively low U adsorption efficiency. At the alkaline conditions (>pH 7), the U could be adsorbed in the form of anionic U-hydroxy complexes (UO₂(OH)₃^-, UO₂(OH)₄^2-, (UO₂)₃(OH)₇^-, etc.), mainly by bonding with oxygen (O^-) from Si-O or Al-O(OH) on the WRK bentonite or by co-precipitation in the form of hydroxide, showing the high U adsorption. At pH 7, the relatively low U adsorption efficiency (42%) was acquired in this study and it was due to the existence of the U-carbonates in solution, having relatively high solubility than other U species. The U adsorption efficiency of the WRK bentonite can be increased by maintaining a neutral or highly alkaline condition because of the formation of U-hydroxyl complexes rather than the uranyl ion (UO₂²⁺) in solution,and by restraining the formation of U-carbonate complexes in solution.

• Journal of Aquaculture
• /
• v.17 no.4
• /
• pp.275-281
• /
• 2004

The present study was conducted to evaluate dietary requirements for essential fatty acids (EFAs) such as linoleic acid (LA, l8:2n-6), -lenolenic acid (LNA, 18:3n-3), or docosahexaenoic acid (DHA, 22:6n-3), eicosapentaenoic acid (EPA, 20:5n-3) and arachidonic acid (ARA, 20:4n-6) in juvenile eel Anguilla japonica cultured in a recirculating system for 16 weeks. The experimental diets contained 50% crude protein, 10% crude lipid and 3800 kcal/kg energy.Brown fish meal and blood meal were used as the main protein sources, while coconut oil, com oil and linseed oil were used as the lipid source to yield target fatty acids ratios. At the end of the trial, the effects of essential fatty acids supplementation on weight gain (WG), specific growth rate (SGR), feeding efficiency (FE), proximate composition andwhole body fatty acids contents were examined. WG, SGR, and FEof eels fed diet D2, D3, was significantly higher (P<0.05) than those of fish fed the other diets. Whole body HUFA concentration of eels fed D 1 was significantly lower (P<0.05) than those fed the other diets. HUFA/SFA (saturated fatty acids) ratio of whole body in eels fed diets D2, D3 and D6 were significantly higher than that of eels fed diet D1 (P<0.05).DHA/EPA ratio of whole body in eels fed diet D7was significantly higher than those fed the other diets; and eels fed diet D5 showed the lowest DHA/EPA ratio among all the dietary treatments (P<0.05).Based on the experimental results, we concluded that LNA (n-3) and LA (n-6) were necessary for optimum growth of juvenile eel, and the dietary requirement of LNA and LA were 0.35∼0.5% and 0.5∼0.65%, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.2
• /
• pp.95-105
• /
• 1973

Sink (grain)-filling rates of IR667 line (Suwon 213 and 214) and local leading varieties (Jinheung and Paldal) were investigated in relation to sink-source ratio, sink-source distance, forms of photosynthates, and weather factors. The results are as follows. 1. IR667 line have higher maximum filling rate (g. grain/day. ear) and shorter duration to reach maximum filling rate than local varieties. The curve pattern of sink-filling rate was high and steep type in IR667 line and low and broad type in local varieties. 2. Weather factors seem to give little effect on the curve pattern of sink-filling rate. 3. The functional sink-source distance (actual sink-source distance multiplied by the contribution rate of leaf for grain production) was shorter in upper leaves (flag and 2nd leaf) for IR667 line, the upper leaf-dependent type in grain production, and was longer in lower leaves (3rd and 4th) for local varieties, the lower leaf-dependent type. Specially short first internode from top may contribute to the upper leaf depencency of IR667 line. 4. According to free sugar-starch ratio (sugar/starch) in the culm and leaf sheath IR667 line could be classified as the high sugar type and the local varieties as the high starch type. The ratio of transportable form (sugar) to non transportable photosynthate (starch) seems to relate with sink-filling rate. And high sugar type is expected to have higher efficiency for grain production in view of energy balance. 5. A hypothesis that the higher in the uniformity within the series of productive structure the more efficient in grain production is proposed and discussed in relation to productivity. 6. According to the pattern of percent nutrient retention of each leaf blade IR667 showed the central retention type and Jinheung showed the apical retention type and each retention type appears to be a cause of each canopy conservation pattern. 7. From the content and percent distribution of nutrient in various organ IR667 could be classified as the leaf sheath dominant type and Jinheung as the leaf blade dominant type. 8. The fact that the greater the percent translocation of nutrient into grain the greater the percent nutrient retention in leaf blade was held between nitrogen and phosphorus within a variety and between varieties within a nutrient (N, P or K).

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.137-141
• /
• 2010

Poly [4,7-Di-thiophen-2-yl-benzo(1,2,5)thiadiazole]-alt-1,4-bis(dodecyloxy)-2,5-divinylbenzene (PPVTBT) was synthesized by the Heck coupling reaction between 4,7-Di-thiophen-2-yl-benzo(1,2,5)thiadiazole and 1,4-bis(dodecyloxy)-2,5-divinylbenzene. The maximum absorption and band gap of PPVTBT were 550 nm and 1.74 eV, respectively. The HOMO and LUMO energy level of PPVTBT were -5.24 eV and -3.50 eV, respectively. The photovoltaic device based on the blend of PPVTBT and (6)-1-(3-(methoxycarbonyl)propyl)-{5}-1-phenyl[5,6]-$C_{61}$ (PCBM) (1 : 6 by weight ratio) was fabricated. The efficiency of device was 0.16%. The short circuit current density (Jsc), fill factor (FF) and open-circuit voltage (Voc) of the device was $0.74mA/cm^{2}$, 31% and 0.71 V, respectively, under AM 1.5 G and 1 sun condition ($100mA/cm^{2}$).

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.2
• /
• pp.176-184
• /
• 1998

A total of 125 pigs (5.8 kg of BW) were allotted in a completely randomized block design. Treatments were coconut oil, corn oil, soybean oil, tallow and tallow+lecithin. Each treatment had 5 replicates with 5 pigs per replicate. From d 0 to 7, pigs fed vegetable oil supported greater average daily gain (ADG) and improved feed/gain (F/G) compared to pigs fed the animal fat. Addition of lecithin to tallow increased ADG by 7.2%. Feed intake were similar for all treatment groups. From d 8 to 14, pigs fed coconut oil and soy oil showed better ADG and average daily feed intake (ADFI) than any of the others. From d 15 to 21, pigs fed the tallow diets had lower gains (p < 0.05) than those fed diets that contained vegetable oil and tallow with added lecithin. The effect of different fat sources on gain became smaller with age. Feed intakes were similar between the vegetable oil and lecithin supplemented diets each week postweaning except for pigs fed tallow (p < 0.05). Feed : gain ratios were superior during the initial 2 weeks postweaning period when pigs were provided vegetable oil diet compared with pigs fed tallow. All pig groups had similar feed : gain ratios during 3 weeks. Combinations of tallow with lecithin tended to have intermediate feed/gain ratio. It was found that vegetable oils were much better in improving growth rate of the piglets. Lecithin significantly improved growth rate and feed efficiency of the pigs through the whole experimental period compared to tallow. Coconut oil was the most effective in improving growth of pigs during the first two weeks postweaning. Corn oil had equal value with soy oil in improving growth performance of weaned pigs. When vegetable oil was added, the digestibilities of nutrients except for minerals were higher than when the tallow was fed. Nutrients digestibility was similar among vegetable oils. The addition of lecithin to tallow increased digestibility of gross energy, dry matter, ether extract and crude protein. Crude ash and phosphorus digestibility were not affected by the treatments. Dry matter excretion was not different among treatments except for tallow which showed significantly higher dry matter excretion (p < 0.05), while nitrogen excretion was significantly decreased in pigs fed vegetable oil sources. However, Phosphorus excretion was not affected by the different fat sources.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.9
• /
• pp.1305-1313
• /
• 2006

Five male dairy goats (Saanen), 4.6 month old with a body weight of 21.4 ($SD{\pm}1.6$) kg, were used to examine 5 dietary urea treatments in a $5{\times}5$ Latin Square experimental design. The five levels of urea were 10, 20, 30, 40 and 50 g urea/kg DM of steam-treated oil palm fronds (OPF) and dry matter intake tended (p>0.05) to increase with increasing urea supplementation up to 30 g/kg OPF (77.7 g/kg $BW^{0.75}$), but decreased (p<0.05) with 40 and 50 g urea/kg OPF (67.4 and 63.7 g/kg BW0.75, respectively) supplementation. Similarly, dry matter, organic matter, crude protein, neutral detergent fiber and hemicellulose digestibilities increased (p<0.05) with the addition of urea to 30 g/kg OPF but thereafter decreased (p<0.05) with 40 and 50 g/kg OPF. Ruminal pH, ruminal $NH_3$-N concentration and plasma urea concentration increased linearly (p<0.01) and quadratically (p<0.01) as a consequence of addition of urea to the diet. Excretion of total purine derivatives (PD) by goats fed 30 g of urea/kg OPF was highest (p<0.05) followed by goats fed 20, 40, 10 and 50 g of urea/kg OPF. Microbial N (g N/day) and efficiency of microbial N supply expressed as g N/kg organic matter apparently digested in the rumen were higher (p<0.05) in goats fed 30 g of urea/kg OPF (5.5 g N/day and 22.0 g N/kg DOMR, respectively) than in goats on 10 and 50 g of urea/kg OPF treatments. However, the former did not differ from goats fed 20 g of urea/kg OPF (3.9 g N/day and 16.6 g N/kg DMOR, respectively). Ruminal VFA concentration, protein/energy ratio, N absorption and N retention increased (p<0.05) with the addition of urea to the diet up to 30 g/kg OPF but decreased (p<0.05) with 40 and 50 g/kg OPF. This implies that the optimal level of urea supplementation in an OPF based diet was about 30 g urea/kg OPF.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.4
• /
• pp.561-566
• /
• 2008

Two experiments were conducted to evaluate nutritive value of cell mass from lysine production (CMLP) as a protein supplement for ruminants. In each experiment, animals were fed a diet containing 40% of forages and 60% of concentrates, mainly composed of rice straw and ground corn, respectively, to meet the maintenance requirements, and the diets were formulated to supply equal amounts of energy and nitrogen among treatments. In order to investigate the effect of CMLP on ruminal fermentation (Experiment 1), three Korean native goats weighing $26.1{\pm}1.4kg$ were allotted into individual cages with a $3{\times}3$ Latin square design. Each animal was fed one of three protein sources (CMLP, soybean meal (SBM), and urea). Rumen pH, bacterial and fungal counts, volatile fatty acid concentrations and acetate to propionate ratio were not significantly different among treatments. Concentration of propionate, however, was higher in SBM treatment (14.1 mM) than in CMLP (8.7 mM) or urea (9.3 mM) treatments. There was significantly more branch-chain volatile fatty acid production in CMLP (1.9 mM) and SBM (1.8 mM) treatments than in urea (1.3 mM) treatment. The number of protozoa was the highest in urea treatment, followed by CMLP and SBM treatment with significant differences. A metabolic trial (Experiment 2) was conducted to measure in vivo nutrient digestibility and nitrogen retention in Korean native goats fed CMLP and SBM. Two heavy ($35.0{\pm}1.2kg$) and two light ($25.0{\pm}0.9kg$) Korean native goats, caged individually, were used in this experiment. A heavy and a light animal were paired and supplemented with either CMLP or SBM. The animals fed CMLP showed a trend of lower total tract digestibility in all the nutrients measured; however, there was no statistical significance except for digestibility of ether extract. Nitrogen digestibility of CMLP was estimated to be about 7% units lower than that of SBM. There was a tendency for lower nitrogen retention in CMLP treatment (35.9%) compared to SBM treatment (42.3%). In summary, CMLP can be a good protein source for ruminant animals from nutritional and economic perspectives and may replace some, if not all, of SBM in a diet without losing nitrogen utilization efficiency. Further research is warranted for investigating the effect of CMLP fed with easily fermentable forage and the effective level of CMLP for replacing SBM.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.7
• /
• pp.952-960
• /
• 2013

The objective of this study was to investigate the effect of carbohydrate source and cottonseed meal level in the concentrate on feed intake, nutrient digestibility, rumen fermentation and microbial protein synthesis in swamp buffaloes. Four, 4-yr old rumen fistulated swamp buffaloes were randomly assigned to receive four dietary treatments according to a $2{\times}2$ factorial arrangement in a $4{\times}4$ Latin square design. Factor A was carbohydrate source; cassava chip (CC) and CC+rice bran at a ratio 3:1 (CR3:1), and factor B was level of cottonseed meal (CM); 109 g CP/kg (LCM) and 328 g CP/kg (HCM) in isonitrogenous diets (490 g CP/kg). Buffaloes received urea-treated rice straw ad libitum and supplemented with 5 g concentrate/kg BW. It was found that carbohydrate source did not affect feed intake, nutrient intake, digested nutrients, nutrient digestibility, ammonia nitrogen concentration, fungi and bacterial populations, or microbial protein synthesis (p>0.05). Ruminal pH at 6 h after feeding and the population of protozoa at 4 h after feeding were higher when buffalo were fed with CC than in the CR3:1 treatment (p<0.05). Buffalo fed with HCM had a lower roughage intake, nutrient intake, population of total viable and cellulolytic bacteria and microbial nitrogen supply than the LCM fed group (p<0.05). However, nutrient digestibility, ruminal pH, ammonia concentration, population of protozoa and fungi, and efficiency of microbial protein synthesis were not affected by cottonseed meal levels (p>0.05). Based on this experiment, concentrate with a low level of cottonseed meal could be fed with cassava chips as an energy source in swamp buffalo receiving rice straw.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.205-209
• /
• 2015

CCU (Carbon Capture & Utilization) has a potential technology for the reduction and usage of carbon dioxide which is greenhouse gas emitting from a fossil fuel buring. To decompose the carbon dioxide, a three phase gliding arc plasma-catalytic reactor was designed and manufactured. Experiments of carbon dioxide reduction was performed by varying the gas flow rate with feeding the $CO_2$ only as well as the input power, the catalyst type and steam supply with respect to the injection of the mixture of $CO_2$ and $CH_4$. The $CO_2$ decomposition rate was 7.9% and the energy efficiency was $0.0013L/min{\cdot}W$ at a $CO_2$ flow rate of 12 L/min only. Carbon monoxide and oxygen was generated in accordance with the destruction of carbon dioxide. When the injection ratio of $CH_4/CO_2$ reached 1.29, the $CO_2$ destruction and $CH_4$ conversion rates were 37.8% and 56.6% respectively at a power supply of 0.76 kW. During the installation of $NiO/Al_2O_3$ catalyst bed, the $CO_2$ destruction and $CH_4$ conversion rates were 11.5% and 9.9% respectively. The steam supply parameter do not have any significant effects on the carbon dioxide decomposition.

• Applied Chemistry for Engineering
• /
• v.24 no.2
• /
• pp.148-154
• /
• 2013

UV curable acryl resin, pressure-sensitive adhesives (PSAs), are used in many different parts in the world. In particular, PSAs has been used in the wafer manufacturing process of semiconductor industry. As wafers become much thinner, UV curable PSAs require more proper adhesion performance. In this study, acrylic PSAs containing hydroxyl groups were synthesized using monomers of 2-ethylhexyl acrylate, 2-ethylhexyl methacrylate, styrene monomer and 2-hydroxyethyl acrylate. Isocyanate modified UV curable PSAs were then prepared by the adduct reaction that facilitates the UV curing property via controlling the amount of methacryloyloxyehtyl isocyanate. The proper adhesion performance and UV curing behavior of UV curable PSAs with various hydroxyl values were studied, and experimental conditions were then optimized to raise the efficiency of wafer manufacturing process. It was found that in case of using the equivalent ratio of 1 : 1 isocyanate hardener used in the UV curable PSAs, the peel strength before the UV curing process decreased as the amount of hydroxyl groups increased in the PSAs. The peeling adhesive strength was also decreased with increasing UV dose due to high curing characteristics.