• Journal of Periodontal and Implant Science
• /
• 제32권2호
• /
• pp.303-314
• /
• 2002

This study was performed to evaluate the usability of Er:YAG laser for periodontal therapy. Forty dental root slabs ($5{\times}5{\times}2mm^3$) were prepared from human periodontally diseased extracted teeth and grouped into 4 groups: 1) control (root planing only), 2) root planing and irradiated with laser at 30mJ, 3) root planing and irradiated with laser at 60mJ, and 4) root planing and irradiated with laser at 100mJ. The root slabs were embedded in resin block before laser treatment. Er:YAG laser was irradiated under water irrigation with the tip held perpendicular to the root surface in contact mode. After Er:YAG laser irradiation or planing on the root surface, morphological changes have been observed under SEM, and the micro-hardness and Ca/P ratio were compared. 1. In the Control group, the root surface showed the directional change caused by root planing instrumentation, and the presence of smear layer, and no exposure of dentinal tubule was observed. Laser irradiated group showed surface changes with rough dentin surface of niche and depression and dentinal tubule exposure by the elimination of smear layer. 2. The micro-hardness of root surface in the laser irradiated group was higher than the control group. The higher energy output was applied, the higher micro-hardness on root surface was resulted. 3. The higher energy output was applied, the higher Ca/P ratio was observed. The higher Ca/P ratio in 60mJ group and 100mJ group was statistically significantly compared to the control group and the 30mJ group. These results suggest that Er:YAG laser irradiation on the periodontally diseased root surface could remove smear layer and increase the micro-hardness on root surface and Ca/P ratio which contribute to enhance the acid resistance of periodontally treated root surface.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1992년도 학술발표회 초록집
• /
• pp.42-45
• /
• 1992

• 수산해양기술연구
• /
• 제40권1호
• /
• pp.17-22
• /
• 2004

This study was carried out at the CWC of Chosun university for the purpose of resistance performance improvement of planing hull, and the results of the tests were confirmed cooperatively with WJFEL. G/T 100 ton class planing hull form was selected, and the improvement of hull form including appendages were performed by using some model test techniques. The model test scope comprises resistance relative tests including wave profile observation, trim and sinkage measurement and flow visualization tests at full load and trial conditions for one bare hull and for two appended hulls. The final wedge and spray strip combined with improved hull form showed about 1.0 knot speed improvement at both of full and trial conditions, and outstanding improvement for fore wave phenomena.

• 한국주거학회논문집
• /
• 제21권1호
• /
• pp.103-112
• /
• 2010

This Study is about the check-List composition for 'Low carbon green growth' of Long-life housing. That utilization for required the check-list composition at Sustainable building strategies and Design methods. That for long life housing, sustainable building strategies part of building construction and interior, the proper foundation for legislative system, maintenance methods with in building life cycle, sustainable and green architecture capability realization prepare for connection plan with 'Low carbon-green growth'. Extracting from elements of Architectural planing answer to basic concept of Low carbon-green growth and aimed at Low carbon scheme for energy saving, green growth scheme for environmental conservation as to each application purpose reconstitute by classify Check-list category about elements of Architectural planing. Through this architectural research deduce elements of architectural planing that can be research utilization with in Check-list composition.

• 대한가정학회지
• /
• 제11권1호
• /
• pp.57-74
• /
• 1973

I. This study on planing menu for group feeding is based on the following ; 1) Decision of nutritive value is based on age, sex, and energy consumption of the students. 2) Selection of food is based on their preference for food through questionaire. 3) Amount of food calorie for each meal is based on data on energy consumption of their daily life. 4) Three data for planing menu for group feeding were based on food rice of each season, favourite foods of girl students and length of their stay at the institution. II. The menu for group feeding was evaluated on nutritive value calorie and protein, 5 basic food groups and price ; 1) The amount of calorie and protein for each season was satisfactory. 2) Each menu was composed of 5 basic food groups but the third group was not satisfactory compared with the other groups. 3) Average price of per day turned out to be 193 won which is less than the standard price, 200 won.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.184-189
• /
• 2009

In order to improve the operation of energy systems, it is necessary for the urban communities to have reliable optimization routines, both computerized and manual, implemented in their organizations. However, before a production plan for the energy system units can be constructed, a prediction of the energy systems first needs to be determined. So, several methodologies have been proposed for energy demand prediction, but due to uncertainties in urban community, many of them will fail in practice. The main topic of this paper has been the development of a method for energy demand prediction at urban community. Energy demand prediction is important input parameters to plan for the energy planing. This paper presents a energy demand prediction method which estimates heat and electricity for various building categories. The method has been based on artificial neural networks(ANN). The advantage of ANN with respect to the other method is their ability of modeling a multivariable problem given by the complex relationships between the variables. Also, the ANN can extract the relationships among these variables by means of learning with training data. In this paper, the ANN have been applied in oder to correlate weather conditions, calendar data, schedules, etc. Space heating, cooling, hot water and HVAC electricity can be predicted using this method. This method can produce 10% of errors hourly load profile from individual building to urban community.

• 한국지열·수열에너지학회논문집
• /
• 제7권1호
• /
• pp.65-71
• /
• 2011

Recently, central and local governments of Korea have established and implemented various energy policies such as making energy map of city level and establishment of environment friendly city plan to materialize low carbon green city. To implement effectively these policies, however, conditions of energy consumption by each administrative district and each usage have to be verified exactly. This study is aimed to suggest a basic data for planing energy policy and energy demand prediction of city level by analyzing energy consumption unit and conditions of city gas by borough and usage in Busan.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.198-198
• /
• 2011

Cooling and Heating system using Geothermal energy in the country has shown rapid development in the research and business field during about 10 years. However, like other renewable energy sources, high initial construction cost is acting as an obstacle to apply widely. Therefore Energy pile system(Heat Exchanger inserted inside the structure pile) that can save about 25 % initial construction cost has been studied in European countries and recently being studied in our country. Therefore, KPECO(Korea Electric Power Corporation) is also studying energy pile system to improve cooling & heating system in substation that install about 200 pile. KPECO is aimed to make energy pile design, construction and maintenance standards because substation has good applicability. In this study, we studied to make new grout material and design program to make optimized design & counstruction method of energy pile system. And planing to peform field test for energy pile system in a 154 kV substation to obtain long-term behavior and efficiency of the system.

• 한국해양환경ㆍ에너지학회지
• /
• 제16권3호
• /
• pp.202-210
• /
• 2013

최근 소득증대로 인해 해양레저에 대한 관심이 높아짐에 따라 해양레저용으로 많이 이용되는 활주형선의 선형설계와 생산에 대한 많은 연구 개발이 필요해지고 있다. 지금까지 수행된 활주형선의 저항에 대한 연구를 분석해본 결과 활주형선은 속도가 빠르고 침수표면적이 매우 작기 때문에 일반 선박과는 다른 저항 특성을 가지고 있음을 알게 되었다. 본 연구는 현재 조선소와 추진기 및 엔진 생산업체에서 유효마력 산정에 널리 활용되는 Savitsky공식을 이용하여 연구대상 활주형선의 전저항을 먼저 계산한 후 이론해석과 풍동실험을 통하여 활주형선 주위에 대한 유동특성을 분석하고 속도와 트림각도 변화에 따른 공기저항, 양력 등을 구하였다. 또한 이 결과를 이용하여 전저항에 대한 공기저항의 비율을 속도와 트림각 변화에 대하여 이론해석결과와 실험결과를 비교하고 분석하였으며 본 연구결과는 좀 더 정확한 유효마력 추정에 활용되어 산출근거를 무시하고 막연하게 고마력 엔진을 장착하는 폐단을 막을 수 있을 것으로 기대된다. 한편 기상 이변으로 인한 자연재해가 증가하면서 온실가스에 대한 관심이 높아지고 있다. 국제해사기구(IMO)에서는 선박의 설계 단계에서 적용되는 에너지 효율 지수(EEDI)와 해상을 운항할 때 적용되는 에너지 효율지수(EEOI)를 제정하여 선박으로부터 배출되는 온실가스를 줄이려 하고 있다. 그러나 이 규정은 총톤수(GT) 400톤 이상의 선박에 적용될 예정이므로 해양레저용 선박과 같은 소형 선박은 대형 선박에 비해 단위 출력 당 온실가스 배출량은 오히려 많지만 이 IMO 규정에 의한 규제를 받지 않는다. 따라서 본 연구는 소형선박인 해양레저용 활주형선의 온실 가스 배출량을 산출함으로써 이에 대한 문제점을 제기하고 소형선박에 적용될 수 EEDI 계산법 제정의 필요성을 제시하였다.

• 한국환경과학회지
• /
• 제12권3호
• /
• pp.359-366
• /
• 2003

Ecological society and energy conservative systems has become a subject of world wide attention. To examine the technologies of such systems as resource recycling society, this study is proposed for using rainwater as energy source and water resources in urban area. Useful informations for planning of utilizing rainfall as energy source, water resources, emergency water and controlling flood are discussed with model systems in urban area. It is calculated that the rate of utilizing rainwater, amounts of utilizing rainwater, substitution rate of supply water, amounts of overflow rainwater according to rain storage tank volume. By applying the past weather data, The optimum volume of rain water storage was calculated as 200m$^3$ which mean no benefits according to the increase of storage tank volumes. For optimum planing and control method at the model system, several running method of rainwater storage tank was calculated. The optimum operating method was the using weather data as 3hours weather forecast.