• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.465-473
• /
• 2015

The increasing need to improve transient security assessment of existing or forecasted operating conditions of networks by power system operators is major concern of the power system security monitoring problem at the Energy Management Systems. This paper proposes a preventive control of transient stability with generation rescheduling based on rotor trajectory index obtained using time domain simulations. This index may help power engineers in making operational decision and to obtain a generation configuration with better transient security dispatch. The effectiveness of the proposed methodology is demonstrated on IEEE 39-bus New England system for a three phase fault at different loading conditions with single and multiple line outage cases.

• Journal of Energy Engineering
• /
• v.29 no.2
• /
• pp.61-67
• /
• 2020

ESS-based buildings are being widely studied as an effective methods for saving energy with ZEB, BEMS, and FEMS. However, in large scale buildings, there are many energy-consuming facilities, so it is necessary to identify important energy-consuming facilities to build a real-time measurement system. In addition, there are a myriad of factors that affect the dependent variable of energy use, therefore there is a limitation that effective energy management is difficult. Therefore, this study applied the measurement boundary setting methodology according to the energy supply status through due diligence for the demonstration ESS distribution logistics facility, and suggested the methodolgy for presenting priority for the construction of the measurement system. Afterwards, the impact variables that Acting as an independent variable affecting the energy consumption of the distribution and logistics facilities were categorized into intrinsic and meteorological variables. Lastly, all factors that could affect the energy consumption of the actual distribution and logistics facilities, were classified and presented as guidelines list. By applying the results of this study, it is possible to build a monitoring system at a low cost and high efficiency in a distribution and logistics facility with a complex structure. And by identifying the main independent variables for the measured energy consumption, effectively identifying trends in energy consumption and deriving saving points It is expected to be able to operate the ESS-based infrastructure.

• Journal of Korean Society on Water Environment
• /
• v.37 no.6
• /
• pp.458-468
• /
• 2021

In this study, we investigated the variations of dissolved organic matter (DOM) in an agricultural reservoir during the monsoon period (June to October, 2020) with respect to the organic carbon concentration (DOC), molecular weight distribution, and optical properties. The monsoon period was divided into three phases - beginning storm (BS), during storm (DS), and after storm (AS). Our results showed significant differences in the concentrations and characteristics of DOM during the summer monsoon. The DOC concentrations were decreased after the monsoon, probably due to a dilution effect. In contrast, increasing trends were observed in the specific UV absorbance (SUVA), and relative abundances of humic-like fluorescence and larger-sized compounds. These observations implied that the large-sized and humic-like organic components with terrestrial origins strongly affected the reservoir DOM after the summer monsoon. Meanwhile, biopolymer size fraction, which is associated with algal activity, became more abundant after the monsoon. These results suggest that DOM with autochthonous sources became dominant as a result of the inflow of nutrients into the reservoir after the storm. Spatial changes in DOM within the reservoir were not pronounced as much as the temporal variations. All taken, it can be concluded that the summer monsoon simply led to the decrease of DOM concentrations while the sources and the quality of DOM underwent substantial changes, which may enrich refractory organic matter in the reservoir. This study reveals the importance of in-depth DOM quality monitoring before and after summer monsoon for effective water quality management in agricultural reservoirs.

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.592-603
• /
• 2019

This study is about the implementation of low energy sewage management technology through effective control of blower which consumes the most energy in sewage treatment. In calculating the amount of oxygen required for microorganisms, unlike the existing method using the operating index in the bioreactor or TMS data in the discharge port, the CODcr and NH₄⁺-N concentration changes in sewage flowing into the sewage treatment plant were detected in advance before entering the bioreactor and the amount of air was controlled based on this. The pre-sensing was found to have a high correlation compared with conventional products. As a result of blower control, it was possible to save about 9.9% energy more than the manual control. Consequently, this study suggested the possibility of blower's real-time control combined with pre-sensing technology. Also, it is expected that the low energy sewage treatment can be applied to sewage treatment facilities dependent on operation by manpower, and it will contribute to the reduction of greenhouse gas emissions.

• Korean Institute of Interior Design Journal
• /
• v.21 no.3
• /
• pp.194-202
• /
• 2012

The purpose of this study is to extract environment-friendly planning elements to apply in Korea by putting together and reclassifying four foreign environment-friendly certification systems related to regeneration spaces - LEED in USA, CASBEE in Japan, BREEAM in England and BEAM in Hong Kong - and analyze and evaluate domestic and foreign spaces which were certified as Environment-friendly spaces in order to offer plan guidelines to raise awareness of the importance of environment-friendly elements in regeneration spaces and to encourage them. The concept and the characteristics of green building were studied through documentary survey. In addition, green certification system of the present domestic new spaces and foreign regeneration spaces was studied and assessment tools for indoor regenerated spaces-related green certification system were developed. With checklists which are developed in this study, level of going green of foreign spaces certified environment-friendly was assessed. Based on the results of this study, conclusions are as follows. As a result of case research of spaces-certified green of Hong-Kong's existing buildings with a developed checklist, application of general assessment part was all alike, but that of detailed assessment part was different. However, Hong Kong showed superiority in lighting energy saving, separate collection of recyclable domestic waste, recycling by-product and management. In addition, Hong Kong applied eco-friendly planning elements maintaining buildings in their condition as possible as it could with management, use of green program, replacement with high efficiency lighting, monitoring system, installation of recycling bins and energy saving by attaching reflective film.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.3
• /
• pp.173-180
• /
• 2009

After the UN General Assembly on 2006, Interest on the marine litter has rapidly increased internationally. The UN sub-organizations, UNEP/Regional Seas, FAO(Food and Agriculture Organization of the United Nations) and OC(Ocean Conservancy) as a one of world NGO had been tackled to collect information and prepared world reports related on marine litter, recently, those are published. Through the 10years experience of Korea's policy on marine litter since 1999, it is re-evaluated as a roll model internationally. In this paper, brief introduction of structure and function of Korea's authorities which are responsible for or are involved in the marine litter issue as well as the National Marine Litter Management Basic Plan which is established in 2008, has been provided. This paper also included the structure and roll of the marine litter initiative center in the plan. Change of the paradigm of action plan on marine litter in Korea already had been started.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.15-21
• /
• 2020

This study analyzes the results of applying the ISO19030 (hull and propeller performance monitoring method) standard to an actual 178 k bulk vessel. Recently, there have been many attempts to apply various energy reduction solutions to vessels to continuously strengthen GHG reduction regulations and secure maritime competitiveness. However, it is not easy to quantitatively analyze the performance of a ship. To resolve these problems, shipping companies, marine paint companies, ship owners, and transportation associations have appointed specialists and standardized the ISO19030 (standard of hull and propeller performance monitoring method) guidelines in 2016 after three years of continuous review. The ISO19030 standard provides methods to monitor hull and propeller performance quantitatively through standardized procedures, thus allowing ship managers to arrive at informed decisions for hull and propeller maintenance, and to evaluate energy-saving solutions and ship-maintenance efficiency. The ISO19030 standard provides a method of analyzing the ship's own performance by collecting the ship's operation and agency data and correcting its environmental and operating factors. In this paper, we apply the ISO19030 standard to three actual ships and propose the ISO19030 application result and the improvement point of the current ISO19030 standard.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.4
• /
• pp.223-233
• /
• 2021

Systematic and continuous monitoring and management of the energy consumption of buildings are important for estimating building energy efficiency, and ultimately aim to cope with climate change and establish effective policies for environment, and energy supply and demand policies. Globally, buildings consume 36% of total energy and account for 39% of carbon dioxide emissions. The purpose of this study is to generate three-dimensional thermo-spatial building models with photogrammetric technique using drone TIR (Thermal Infrared) images to measure the temperature emitted from a building, that is essential for the building energy rating system. The aerial triangulation was performed with both optical and TIR images taken from the sensor mounted on the drone, and the accuracy of the models was analyzed. In addition, the thermo-spatial models of temperature distribution of the buildings in three-dimension were visualized. Although shape of the objects 3D building modeling is relatively inaccurate as the spatial and radiometric resolution of the TIR images are lower than that of optical images, TIR imagery could be used effectively to measure the thermal energy of the buildings based on spatial information. This paper could be meaningful to present extension of photogrammetry to various application. The energy consumption could be quantitatively estimated using the temperature emitted from the individual buildings that eventually would be uses as essential information for building energy efficiency rating system.

• Journal of Korea Foresty Energy
• /
• v.25 no.2
• /
• pp.42-48
• /
• 2006

This study looked into the change of tree growth of five forest growth monitoring plots which were set up at the Undulyeong Hongchungun Kangwondo, and was accomplished to provide the basic data for the forest management calculating carbon storage and absorption in the Undulyeong area. Annual height and DBH growth were slowly progressed in the Pinus koraiensis, Larix kaempferi, and Pinus densiflora stand which were at young stage, but the growth rates of the other stands were lower than those young stands. The diameter class of the mixed forest and Quercus mongolica and Betala platyphylla stand was predicted to be similar as it is and those of Pinus koraiensis and Larix kaempferi stands were predicted to move to the upper diameter classes because of rapid growth rates of the those stands. As in the year 2005, total carbon storage of the Undulyeong model forest was increased by 155,000 TC(2.7%) compared with the previous year. During 2005, total carbon which was absorbed and stored according to growth of the forest was 166,174 TC and net carbon absorption (155,481 TC) increased by 2,736 TC (1.8%) compared with the previous year. Resultingly, the Undulyeong model forest is acting as a net sink and the net carbon absorption rate is slightly increasing recently.

• Knowledge Management Research
• /
• v.17 no.2
• /
• pp.27-50
• /
• 2016

Korean manufacturing industry have recently faced the catch-up of China in the mass commodity product, such as automotive, display, and smart phone in terms of market as well as technology. Accordingly, discussion on the importance of achieving catch-up in complex product systems (CoPS) has been increasing as a new innovation engine for the industry. In order to achieve successful catch-up of CoPS, we explored emerging technologies of CoPS, which are featured by the characteristics of radical novelty, relatively fast growth and self-sustaining, through the study of emerging technologies of gas turbine for power generation. We found that emerging technologies of the gas turbine are technologies for combustion nozzle and composition of electrical machine for increasing power efficiency, washing technology for particulate matter, cast and material processing technology for enhancing durability from fatigue, cooling technologies from extremely high temperature, interconnection operation technology between renewable energy and the gas turbine for flexibility in power generation, and big data technology for remote monitoring and diagnosis of the gas turbine. We also found that those emerging technologies resulted in technological progress of the gas turbine by converging with other conventional technologies in the gas turbine. It indicates that emerging technologies in CoPS can be appeared on various technological knowledge fields and have complementary relationship with conventional technologies for technology progress of CoPS. It also implies that latecomers need to pursue integrated learning that includes emerging technologies as well as conventional technologies rather than independent learning related to emerging technologies for successful catch-up of CoPS. Our findings provide an important initial theoretical ground for investigating the emerging technologies and their characteristics in CoPS as well as recognizing knowledge management strategy for successful catch-up of latecomers. Our findings also contribute to the policy development of the CoPS from the perspective of innovation strategy and knowledge management.