• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.365-368
• /
• 2006

The objective of this research is to investigate usage of 3KW photovoltaic-wind power hybrid generation system composed of 500W solar power generator and 400W wind power generator in a parallel circuit. In addition, solar radiation meter and wind monitor have been installed into each generation system to obtain the practical operating data that monitored in monthly, daily and hourly. These data that are independent to weather change and location would provide adequate generation output on average and cope with emergency situation in generation system In conclusion, based on this study, it could be considered for 3KW combined generation system to be gradually propagated to houses and small-size public facilities.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.4
• /
• pp.275-281
• /
• 2004

Compared with the earlier technique of dual photon absorptiometry (DPA) using $^{153}Gd$ radionuclide source, dual energy X-ray absorptiometry (DXA) has advantages of higher precision, accuracy and shorter scanning time. Despite the change from DPA to DPX, the nuclear medicine physicians has remained one of major suplier of this service due to long-standing use of DPA. Among many kinds of bone densitometries, DXA is the "gold standard" for the noninvasive diagnosis of osteoporosis. Especially there is no role for peripheral devices in the monitoring of patients on therapy. But, there are some areas of controversy related to the application of DXA, such as proper site of measurement, accurate interpritation, appropriate use of T-score, and the reference population young database. And the accuracy, precision, and quality control issues relating to bone density measurement are important subjects. To address these issues, the International Society for Clinical Densitometry (ISCD) has convened two Position Development Conferences and addressed official positions. This review deals the key elements of ISCD position paper and other important issues on the management of bone densitometry.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.1
• /
• pp.32-36
• /
• 2011

In this study, authors have proposed the autonomous state estimation which has been composed with IEC61850, GPS time synchronization and objective model design concept. The proposed method is able to supervise/correct measurement and communication error from SCADA. The major advantages of the proposed autonomous state estimation are that it is possible to evaluate integrity of data measured and transferred from SCADA, to reduce human intervention and to expense national-size applications such as EMS (Energy Management System), WAMS (Wide Area Monitoring System) or WAPS (Wide Area Protection System). This study addresses the issues related to the operation of the smart grid and proposes a new automated approach to achieve this goal. Through applying the proposed system to IEEE 14-bus test electric system, we prove the possibility of the proposed idea.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.08a
• /
• pp.75-87
• /
• 2005

Remote sensing(RS)- and geographic information system(GIS)-based information management to measure and assess agri-environment schemes, and to quantify and map environment indicators for nature and land use, climate change, air, water and energy balance, waste and material flow is in high demand because it is very helpful in assisting decision making activities of farmers, government, researchers, and consumers. The versatility and ability of RS and GIS containing huge soil database to assess agricultural environment spatially and temporally at various spatial scales were investigated. Spectral and microwave observations were carried out to characterize crop variables and soil properties. Multiple sources RS data from ground sensors, airborne sensors, and also satellite sensors were collected and analyzed to extract features and land cover/use for soils, crops, and vegetation for support precision agriculture, soil/land suitability, soil property estimation, crop growth estimation, runoff potential estimation, irrigated and the estimation of flooded areas in paddy rice fields. RS and GIS play essential roles in a management and monitoring information system. Biosphere-atmosphere interection should also be further studied to improve synergistic modeling for environment and sustainability in agri-environment schemes.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.693-697
• /
• 2007

A control system for solar thermal power plant is the control system to coordinate the whole system's operation, including management of distributed control systems, process control for optimal operation of total system, monitoring system operating conditions and doing administrative functions. This work, as a progress report, presents the results obtained so far in building a control system for the 1MW solar thermal power plant. To make the control system, we first defined the control system's hierarchy and classified the role of each layer. Then, as the first stage of making control system, we designed and developed the sun tracking control system for heliostat.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.273-274
• /
• 2018

Recently, many countries around the world are investing heavily in green industries based on green IT technology. The key industry in the green industry is LED. If we replace traditional lighting, we can save a lot of socioeconomic costs. Because it is energy efficient. However, the research and development on maintenance and management are still insignificant about LED lighting. Therefore, after the failure, the post-treatment is delayed and often occurs. In order to solve these problems, it is planned to detect the failure of the LED lighting and to establish a monitoring system that can monitor the situation in real time on the computer or mobile phone of the remote manager using the latest IoT network technology.

• Health Policy and Management
• /
• v.11 no.3
• /
• pp.71-88
• /
• 2001

The purpose of this study is to analyze the cost-effectiveness of four medications for treating and preventing osteoporosis -HRT therapy(conjugated equine estrogen 0.625mg for 25 days and medroxyprogesterone acetate 5mg for 01112 days), Alendronate(10mg and 5mg), Active Vitamin D(Calcitriol), and Calcium. Total costs include the direct medical cost -examination fee, consultation fee, prescription fee, fee for preparing medications, and the price of pharmaceuticals- and the indirect cost of patients such as traffic expenses and time cost. In addition, the costs of monitoring in adverse reactions are added. The effects of four medications are expressed as BMD(Bone Mineral Density) percent change measured by DEXA(Dual Energy X-ray Absorptiometry) in lumbar spine(L2-L4) and femoral neck site. A mixed model based on meta analysis provides the estimates of effectiveness, which are then appled to the hypothetical cohort consisting of postmenopausal women at the age of 50-59. HRT therapy is the most cost-effective medication at 172,433.64 won (lumbar spine site) and 546,328.28 won (femoral neck site) per BMD percent change for osteoporosis. Alendronate 10mg is more cost-effective than Alendronate 5mg as 345,971.23 won and 378,441.63 won per lumbar BMD percent change at 0.991ｇ/$cm^2$, respectively. Alendronate 10mg is more cost-effective than Alendronate 5mg as 1,329,257.89 won and 1,467,291.23 won per femoral neck BMD percent change at 0.834ｇ/$cm^2$, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.55-63
• /
• 2017

Due to spatial problems and system size,conventional measurement methods used to acquire the information needed for existing electrical energy and management have been limited to new buildings or areas where replacement is possible. This electric load management method is problematic when applying it to energy and safety management of vulnerable areas or existing homes or offices. The problem with installing a measurement module in every branch is that the system is too large. Even if the measurement module is installed, the type of load is not recognized, and efficient management is not performed. In particular, it is very difficult to apply it to traditional markets and backward facilities in Korea. In this paper, we apply NIALM technology and arc detection technology to solve these problems and verify the feasibility of NIALM for normal arc generation. Also, based on the verification results, we propose a new smart home safety management system that can effectively manage electrical safety and that can be applied to conventional market and existing home safety management systems. The proposed system conducts a comparative performance test with an existing safety management system. In addition, it achieves 95% or more load recognition for four loads, which is impossible in 40% of the existing systems, and the arc detection function was confirmed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.2
• /
• pp.70-76
• /
• 2014

In industrial situation, electronic and electro-mechanical systems have been using different type of batteries in rapidly increasing numbers. These systems commonly require high reliability for long periods of time. Wider application of battery for low-power design as a prime power source requires us knowledge of failure mechanism and reliability of batteries in terms of load condition, environment condition and other explanatory variables. Battery life is an important factor that affects the reliability of such systems. There is need for us to understand the mechanism leading to the failure state of battery with performance characteristic and develop a method to predict the life of such battery. The purpose of this paper is to develope the methodology of monitoring the health of battery and determining the condition or fate of such systems through the performance reliability to predict the remaining useful life of primary battery with load condition, operating condition, environment change in light of battery life variation. In order to evaluate on-going performance of systems and subsystems adopting primary batteries as energy source, The primitive prototype for performance reliability analysis device was developed and related framework explained.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.20-25
• /
• 2021

In the background of the rapid development of the IoT, smart home work is becoming more and more important to each science and technology company. Smart home provides a safe, comfortable, high-quality, high-performance smart home living space compared to general homes, and at the same time It is responding to the low-carbon, eco-friendly global trend. Growth drivers driving the smart home market are increasing the number of Internet users, increasing disposable income in developing countries, increasing the importance of remote home monitoring, and increasing the need for energy saving and low carbon. In 2013-2014, Xiaomi launched a series of smart routers and smart home hardware devices. In 2015, it announced the latest product of the Xiaomi Ecological Chain, the "Smart Home Package," and in 2016 launched the MIJIA brand to invest in various smart product companies. In 2017, Xiaomi announced a plan to build an open smart hardware MIOT platform. We investigated the management strategy of Xiaomi home smart service based on IOT. The management strategy was divided into cost lead strategy, differentiation strategy of Xiaomi home service, and AIOT strategy of Xiaomi smart home.