• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.431-437
• /
• 2013

These days, many people live a healthy life, but suffering caused by chronic diseases. The main factors of chronic diseases are stress, blood pressure and obesity. Chronic diseases which are caused by high blood pressure are very high incidence. Therefore, this paper suggests the ways to prevent as diagnosis a phenomenon that occur rising in blood pressure consistently by analyzing the voice according th rising in blood pressure. For this, I studied some influence on voicing through rising in blood pressure by applying pitch that measure vocal fold vibration and intensity that measure voice energy size that is one of technique. That collect and analyse the voice after rising blood pressure by aerobic exercise.

• Journal of the Korean Society of Combustion
• /
• v.1 no.1
• /
• pp.75-82
• /
• 1996

Laser induced incandescence, LII, recently developed technique for measuring soot concentration in flames, can overcome most of limitations of conventional laser extinction measurement. In this study, experiments were performed to investigate the effect of laser intensity, detection wavelength, and also laser beam quality on both LII signal at a particular position and peak-to-centerline LII signal ratio. The results of LII signal with increasing laser intensity shows its near-independence of laser intensity once threshold level of laser intensity has been reached. However, this near-independence depends on laser beam quality and the incident optical setup. The peak-to-centerline LII signal ratio slowly but continuously increases with laser power. This fact is due to the dependence of LII signal on particle mean diameter. LII signal is attenuated during it passes through the flame containing soot particles. The attenuation rate is inversely proportional to detection wavelength. In this study, LII signal at 680 nm band is 10% greater than the signal at 400 nm band.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.481-488
• /
• 2015

It is difficult to see a therapeutic effect from cardiovascular disease treatment methods in the case of a hardened chronic total occlusion (CTO), owing to the calcification of the deposition materials. However, lesion cells, such as CTOs, can be selectively necrotized without affecting the normal tissue using high-intensity ultrasound focused on one point. In this study, a phantom CTO was necrotized by a high-intensity focused ultrasound (HIFU) energy system, and the acoustic characteristics in the focal region were analyzed. An experimental HIFU device was constructed to discover the appropriate conditions for the necrosis of a phantom CTO. The transfer characteristics of the ultrasound changed in the focal region by the density difference of the phantom CTO. These changes were acoustically analyzed to choose the available frequency band for each density. On-off temperature control in the focal region was applied to prevent rapid temperature rises, which would otherwise affect normal tissue.

• Journal of Hydrogen and New Energy
• /
• v.18 no.1
• /
• pp.75-84
• /
• 2007

The effects of hydrogen enrichment to methane on NOx formation have been investigated with swirl stabilized pre-mixed hydrogen enriched methane flame in a laboratory-scale pre-mixed combustor(nominally of 5,000 kcal/hr). The hydrogen enriched methane fuel and air were mixed in a pre-mixer and introduced to the combustor through different degrees of swirl vanes. The flame stability was examined for different amount of hydrogen addition to the methane fuel, different combustion air flow rates and swirl strengths by comparing equivalence ratio at the lean flame limit. The hydrogen addition effects and swirl intensity on the combustion characteristics of pre-mixed methane flames were examined using gas analyzers, and OH chemiluminescence techniques to provide information about species concentration of emission gases and flowfield. The results of NOx and CO emissions were compared with a diffusion flame type combustor. The results show that the lean stability limit depends on the amount of hydrogen addition and the swirl intensity. The lean stability limit is extended by hydrogen addition, and is reduced for higher swirl intensity at lower equivalence ratio. The addition of hydrogen increases the NOx emission, however, this effect can be reduced by increasing either the excess air or swirl intensity. The NOx emission of hydrogen enriched methane premixed flame was lower than the corresponding diffusion flame under the fuel lean condition.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.289-292
• /
• 2008

This paper represents the electric energy saving using light control system. Without Light Control System(LCS), it is very hard to classify the amount of electric energy saving for lighting, since it is determined by the end-user's preference in times. Typical LCS has an fixed algorithm to control each light's intensity by ON/Off Control, Step Control, or Dimming Control. We have studied the electric energy saving effect in a LCS equiped building with natural lighting. The electric power consumption at the peak power consumption time with LCS reduced up to 65% of the non-controled case.

• Journal of the Korean Physical Society
• /
• v.73 no.11
• /
• pp.1725-1728
• /
• 2018

We synthesized the gold nanoparticles (Au NPs)-embedded methylammonium lead iodide ($MAPbI_3$) film for the first time. The effects of metal nanoparticles on $MAPbI_3$ perovskite were systematically studied using UV-Vis absorption and photoluminescence (PL) measurements. As a result, the 20-nm-sized Au NPs-embedded $MAPbI_3$ film exhibited a 4.15% higher absorbance than the bare $MAPbI_3$ film. Moreover, the average PL intensity of the Au NPs-embedded $MAPbI_3$ film increased by about 75.25% over the bare $MAPbI_3$ film. Therefore, we have confirmed that addition of the Au NPs has a positive effect on the optical properties of $MAPbI_3$, and we believe that this study will provide a basic insight into the metal nanoparticles-embedded perovskite thin films for the future optoelectronic applications.

• Environmental and Resource Economics Review
• /
• v.20 no.2
• /
• pp.199-228
• /
• 2011

In this study, the effect on the economy-energy-environment gap among regions of reducing GHGs is analyzed under various scenarios, using a multiregional dynamic CGE model. Regions in Korea are classified as six metropolitan areas. Scenarios are set in three cases such as self-regulatory measures, carbon tax and emissions trading scheme. The reduction target under each scenario is again classified according to volume basis and intensity basis. In results, self-regulation is shown to deepen the economic divide mostly, followed by a carbon tax, emissions trading scheme in order. This result could be interpreted such that a system based on market incentives gives less effect on the gap among regions. However, market incentives based system is expected to take time to build. Thus in implementing policies to increase short-term effects of the reduction targets, complementary policies are needed to reduce the regional devide.

• Nuclear Engineering and Technology
• /
• v.32 no.1
• /
• pp.1-9
• /
• 2000

Delayed hydride cracking (DHC) velocity and threshold stress intensity factor for DHC ($K_{IH}$) tests in the radial direction on M11 pressure tube material in Wolsong unit 1 were carried out following the Atomic Energy Canada Limited (AECL) standard test procedure in order to identify the effect of undercooling on DHCV and to acquire the $K_{IH}$ data. The results showed that $K_{IH}$ 's were 8.8$\pm$0.8 MPa√m in the back offcut and 11.4$\pm$0.7 MPa√m in the front offcut. The fact that $K_{IH}$ in the front offcut is about 20% higher than that in the back offcut is attributed to the microstructural difference between the materials of the front and back ends. $K_{IH}$ 's in M11 pressure tube appeared to be higher than the values from the tubes made of double melted ingot reported earlier. This can be interpreted by the fact that very small amounts of Chlorine (Cl) and Phosphorus (P) are contained in the ingot and that the content of the harmful elements in the M11 pressure tube is equivalent to that made of a quadruple melting process. DHC velocities at 25$0^{\circ}C$ in the front offcut in the radial direction are measured to be 5~8$\times$10$^{-8}$ m/s. The results show that the prior thermal history change the DHC velocity significantly. This effect was confirmed by the experiment of undercooling prior to the DHC tests.DHC tests.

• Nuclear Engineering and Technology
• /
• v.33 no.6
• /
• pp.626-637
• /
• 2001

A series of study on energy dependence in chemiluminescence dosimetry with sugar and sorbite produced in two different countries was carried out administering a dose of 5 Gy to the samples at six different mean photon energies of 30, 50, 80, 130, 662 and 1250 keV. The results revealed distinct energy dependence of chemiluminescence(CL) output of sugar and sorbite. Although the energy dependence, in general, could be fitted by a polynomial of (os E, with I being radiation energy, up to cubic term, we reached a conclusion that the adoption of a fitting function, $y_{R}$$^{=a}$.(1-e $^{-b.logE}$)$^{c}$ +d, deduced from theoretical energy response curve calculated as the ratio of the mass energy absorption of the samples of interest to the soft tissue is more reasonable and rational. Herecoefficients $y_{R}$ is CL intensity, and a, b, c and d are constants to be determined in the fitting process. Energy dependence of relative sensitivities of one sample to the other, discrepancy in sensitivities of the samples from the two countries, and prominent grain size effect in Sorbitol were also shown.shown.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.75-76
• /
• 2007

ZnS:Cu,Cl phosphor was coated by solid-gel reaction with $SiO_2$ outside layer. The effect of $Cu^{2+}$-doping concentration has been investigated on the luminescence characteristics of ZnS:Cu,Cl blue-green phosphors for inorganic electro luminescent device. Also, SiO2 coated layers' effect on luminescence characteristics. Evaluation of luminescence characteristics dependent on the synthesis conditions is important to get high-performance phosphors properties. EL and PL properties such as luminescence intensity and chromaticity of ZnS:Cu,Cl phosphors synthesized with different concentration of activator, $Cu^{2+}$, were analysed separately