• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.71-79
• /
• 2020

This paper uses super-efficiency DEA model and Malmquist index to evaluate the carbon emission efficiency (CEE) values of the nine western provinces along the "Silk Road Economic Belt" for the period from 2000 to 2015, and analyses the influencing factors of the CEE. The major findings of this study are the following: (1) the overall CEE of the nine western provinces is not high, and there are significant inter-provincial differences in the CEE. Meanwhile, the provinces with higher levels of economic development generally have higher CEE. (2) The annual total factor productivity (TFP) of the nine western provinces, which is mainly determined by technological change, is greater than 1. Moreover, the total average growth rate of the TFP is 15.5%. (3) The CEE of the nine western provinces is not spatially dependent. In addition, the urbanization, openness, use of energy-saving technologies and research and development (R&D) investment have a significant positive impact on the CEE values, while the industrial structure, foreign direct investment, fixed asset investment, government expenditure levels and energy structure have a significant negative impact on the CEE. Among them, R&D investment is the primary factor in promoting the development of CEE, and the government expenditure has the greatest negative impact on the CEE.

• Journal of Environmental Science International
• /
• v.13 no.4
• /
• pp.349-357
• /
• 2004

Emergy is a measure of the processes required to produce something expressed in units of the same energy form. Emergy based indices can provide insights into the thermodynamic efficiency of the process, the quality of its output, and the interaction between the process and its surrounding environment. However, in an industrial system, the inputs are mostly nonrenewable, renewable energy source is nearly zero, ultimate purpose is pursuit of profits in economic activity. In study, we present two indices based on emergy - EEE(Ecological Economic Efficiency) and ERI(Environmental Responsibility Index). The EEE is taken into account real value of product in market economy. The ERI is shown to be a function of the net yield of the economy, its ‘load’ on the environment and ecological economic efficiency. Manufacturing industry of Korea produced the 30% of total GDP in 2001. We applied these indices to manufacturing industry for environmental management and further sustainable industry. As a results, the highest ERI is 0.34 in recycling industries, the lowest ERI is 0.01 in coke, refined petroleum products which is dominated by ELR. The higher ERI, the more friendly to environment. The suggested indices help us understand relative contributions of various alternatives in company's production and consumption activity, and provide a tool of decision-making for the rearrangement of future industries. Furthermore, they contribute to environmental friendly operation and consumption.

• Journal of the Korean Ceramic Society
• /
• v.31 no.2
• /
• pp.206-212
• /
• 1994

Effects of the film deposition process parameters on the properties such as deposition rate, etch rate, refractive index, stress and step coverage of plasma enhanced chemical vapor deposited (PECVD) tetraethylorthosilicate glass (TEOS) SiO2 film were investigated and analysed using SEM, FTIR and SIMS techniques. Increasing TEOS flow or decreasing O2 flow increased the deposition rate and the compressive stress of the oxide film but produced a less denser film. The deposition rate decreased owing to the decrease in the sticking coefficient of the TEOS and the O2 molecules onto the substrate Si with increasing the substrate temperature. Increasing the substrate temperature produced a denser film with a lower etch rate and the higher refractive index by lowering SiOH and moisture contents. Increasing the rf power increases the ion bombardment energy. This increase in energy, in turn, increases the deposition rate and tends to make the film denser. No appreciable changes were found in the deposition rate but the refractive index and the stress of the film decreased with increasing the deposition pressure. The carbon content in the plasma TEOS CVD oxide film prepared under our standard deposition conditions were very low according to the SIMS analysis results.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.4
• /
• pp.45-53
• /
• 2004

In the summer, the irradiated solar heat gain through the roof has an effect on the thermal environment of the top floor units of apartment houses. This paper investigated the differences of the indoor air temperature and thermal comfort index between the top floor unit and the middle floor unit by measuring them at the sample houses. The purpose of this paper is to provide quantitative data about the irradiated solar heat gain during the summertime through the roof of an apartment house and these data to be the source to reevaluate the appropriate roof insulation efficiency. From this study, we obtained the brief results as follows. Indoor air temperature at the top floor unit is $1.2\sim2.2^{\circ}C$ higher than that of middle floor unit. The evaluation of the indoor thermal comfort index at each sample rooms reveals notable thermal differences between the two units. Top floor units need more cooling load during the summertime compared to middle floor units. Therefore, solutions to reduce solar Heat gain at top floor units to be considered.

• Earthquakes and Structures
• /
• v.6 no.6
• /
• pp.581-609
• /
• 2014

Reinforced concrete (RC) structures are likely to experience damage when subjected to earthquakes. Damage index (DI) has been recognised as an advanced tool of quantitatively expressing the extent of damage in such structures. Last 30 years have seen many concepts for DI proposed in order to calibrate the observed levels of damage. The current research briefly reviews all available concepts and investigates their relative merits and limitations with a view to proposing a new concept based on residual deformation. Currently available DIs are classified into two broad categories - non-cumulative DI and cumulative DI. Non-cumulative DIs do not include the effects of cyclic loading, whilst the cumulative concepts produce more rational indication of the level of damage in case of earthquake excitations. Ideally, a DI should vary within a scale of 0 to 1 with 0 representing the state of elastic response, and 1 referring to the state of total collapse. Some of the available DIs do not satisfy these criteria. A new DI based on energy is proposed herein and its performances, both for static and for cyclic loadings, are compared with those obtained using the most widely accepted DI in literature. The proposed DI demonstrates a rational way to predict the extent of damage for a number of case studies. More research is encouraged to address some identified issues.

• Journal of Nutrition and Health
• /
• v.35 no.5
• /
• pp.524-530
• /
• 2002

To evaluate the role of obesity and nutrient intake on serum IGF-1 and serotonin levels in 80 elementary school children (aged 10. 8 yr, 47 boys, 33 girls), we investigated the anthropometric data and the nutrient intake by questionnaries including food daily record, and measured serum IGF-1 and serotonin using RIA and HPLC F-1050 respectively. We obtained the following results by obesity index (underweight-, normal-, obese group). The protein intake of normal group was higher than the others (p < 0.05). The underweight and obese groups had snacks more often than the normal group. The obese group preferred‘cookies’and‘fries’more than the other groups. The serum serotonin levels showed weak correlation with fat (r = 0.315, p < 0.01), fiber (${\gamma}$ = 0.280, p < 0.05) and energy intake (r = 0.242, p < 0.05), but no differences in anthropometric data by obesity index. The serum IGF-1 level was significantly correlated height (r = 0.649, p < 0.001), weight (r = 0.437, p < 0.001) and hip (r = 0.417, p < 0.001), but showed weak correlation with energy intake (r = 0.232, p < 0.05) and carbohydrate intake (r = 0.244, p < 0.05). In this study, we could see only partly correlation among the serum IGF-1 and serotonin and obesity and nutrient intake. Forker research is required into consideration of the essential role of these hormones during a growth period.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.28-32
• /
• 2003

Both $LiNbO_3$ and $KTiOPO_4$ samples were implanted with 350 keY $H^+$ and $He^+$ ions at different doses ranging from $1 ${\times}$\times10^{16}$ to of $5 ${\times}$\times10^{16}$ ions/$\textrm{cm}^2$. Single and multi-energy implantations were performed at room temperature. Mono-mode or a few modes in both $LiNbO_3$ and $KTiOPO_4$ waveguides were observed. The effect of temperature on the refractive index profiles of $LiNbO_3$ and $KTiOPO_4$ waveguids was studied. The temperature covered from room temperature, $200^{\circ}C$, 194.5 K (dry ice) and 77K (liquid nitrogen). Different mechanisms are needed to interpret the observed behavior. A n, increased mono-mode $LiNbO_3$ waveguide was formed by multi-energy keV $He^+$ ions.

• Smart Structures and Systems
• /
• v.23 no.2
• /
• pp.195-205
• /
• 2019

An accurate non-model-based method for delamination identification of laminated composite plates is proposed in this work. A weighted mode shape damage index is formulated using squared weighted difference between a measured mode shape of a composite plate with delamination and one from a polynomial that fits the measured mode shape of the composite plate with a proper order. Weighted mode shape damage indices associated with at least two measured mode shapes of the same mode are synthesized to formulate a synthetic mode shape damage index to exclude some false positive identification results due to measurement noise and error. An auxiliary mode shape damage index is proposed to further assist delamination identification, by which some false negative identification results can be excluded and edges of a delamination area can be accurately and completely identified. Both numerical and experimental examples are presented to investigate effectiveness of the proposed method, and it is shown that edges of a delamination area in composite plates can be accurately and completely identified when measured mode shapes are contaminated by measurement noise and error. In the experimental example, identification results of a composite plate with delamination from the proposed method are validated by its C-scan image.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.494-501
• /
• 2013

The convolution code(CC) of code rate 1/2 as a forward error correction (FEC) in Quadrature Phase Shift Keying (QPSK) is applied to decrease bit error rate (BER) by background noise and multipath in shallow water acoustic channel. Ratio of transmitting signal bandwidth to channel coherence bandwidth is defined as frequency selectivity index. BER and bit energy-to-noise ratio gain of transmitted signal according to frequency selectivity index are evaluated. In the results of indoor water tank experiment, BER is well matched theoretical results at frequency selectivity index less than about 1.0. And bit energy-to-noise ratio gain is also matched theoretical value of 5 dB. BER is effectively decreased at frequency selective multipath channel with frequency selectivity index higher than 1.0. But bit energy-to-noise ratio greater than a certain size in terms of CC weaving is effective in reducing bit errors. In the results, the defined frequency selectivity index in this study could be applied to evaluate a performance of CC in multipath channel. Also it could effectively reduced BER in a low speed underwater acoustic communication system without an equalizer.

• Journal of the East Asian Society of Dietary Life
• /
• v.9 no.3
• /
• pp.325-335
• /
• 1999

The aim of the present study was to evaluate the relations among nutrient intake. self body image and satisfaction, and physical fitness of college students in Taegu. A total of 213 apparently healthy college students living in Taegu were selected for the study. The following anthropometric measurements were made on all participants : weight, height: waist and hip circumferences, and bioimpedence. Using weight and height, the body mass index (kg/$m^2$) was calculated. The 24-hour recall were obtained from subjects. Dietary habits and energy expenditure were examined through questionnaires. Nutrients intake were analyzed by computer aided nutritional analysis program. Variables of Physical fitness were consisted of body fat, muscular strength and endurance, agility. power, flexibility, cardiorespiratory function, physical efficiency index(PEI). Data were analyzed by computer using the SAS 6.12(Statistical Analysis System). The mean heights and weights of these students were similar to those reported for the 50th percentile in a national survey. Nutrient intake of the college students in Taegu was considerably lower than RDA. The male subjects' mean intake of two nutrients, vitamin B$_2$ and calcium, were less than 55% of the RDAs. the female subjects' mean intake of two nutrients, iron and calcium, were less than 55% of the RDAs. A most variables of physical fitness except sit and reach in male students showed a significant higher values than those of female students. There was a significant positive relationship between PEI and the intake of animal protein, fat, Ca. and B$_2$ in male students. Also there was a significant positive relationship between exercise duration of PWC 170 and protein, fat, iron, vitamin A, B$_2$, niacin, and energy intake in female students. The muscular strength showed the significant correlation with weight, height, and waist circumference in male and female students. The cardiorespiratory function and Physical efficiency index showed significantly negative correlation with tricep and subscapular skin thickness in the female students. There were significantly positive correlations between WHR and body efficiency index in male students, and significantly positive correlations between WHR and the cardiorespiratory function in female students. There was no significant level of correlation between the degree of satisfaction of body image and physical efficiency index. However. there was a significant positive correlation between waist circumference (and weight) and physical efficiency index in male and female students and almost all of the surveyed male and female college students wanted less waist circumference or weight even though they were in the criteria of standard waist circumference or weight. In conclusion, a beneficial effect of adequate nutrient intake on physical fitness was found, college students must increase their energy and nutrient intake if it is below than the RDA for improving their physical fitness.