• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.2
• /
• pp.252-256
• /
• 2000

Coronary heart disease (CHD) is caused by elevated blood lipids and the death rate from CHD is continuously increasing in recent years. In Korea, death rate from CHD is more than 30%. Recently, it has been reported that Job's tear decreaseds blood cholesterol level. However, most of the reports used Job's tear itself. Therefore, we have examined the effect of extruded Job's-tear cereal on blood and liver lipid levels in rats fed with a high fat diet for 5 weeks. The energy intake and body weight gain were higher in Job's tear cereal group (JFD) than in high fat fed group(HFD). Blood triglyceride concentration was significantly reduced in JFD group (p<0.05). And Atherogenic Index was decreased about 20% in JFD suggesting favorable effect of Job's-tear cereal on hyperlipidemia. Liver lipids levels were not affected by Job's-tear cereal.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.470-470
• /
• 2015

본 연구의 목적은 위성영상 기반의 SEBAL(Surface Energy Balance Algorithm for Land) 모형과 SWAT(Soil and Water Assessment Tool) 수문모형을 용담댐 유역($922.3km^2$)에 적용하여 증발산량을 산정하고 모형 간 공간 증발산량의 비교를 통해 각 모형의 적용성을 평가하는데 있다. 이를 위해 SEBAL모형의 입력자료로 Terra MODIS(Moderate Resolution Imaging Spectrometer) Product 중 Normalized Distribution Vegetation Index(NDVI), Albedo 영상을 2012년부터 2013년까지 월단위로 구축하고, 일단위의 Land Surface Temperature(LST) 영상을 구축하였다. 지형자료로는 Digital Elevation Model(DEM)과 Land use를 구축하였으며 SEBAL 모형의 구동을 위한 위성영상 및 지형자료는 500 m의 공간해상도로 재구축하였다. SWAT 모형의 모의를 위해 기상 및 유량 자료를 2000년부터 2013년까지 일단위로 구축하였고, DEM, Land use, 토양도의 지형자료를 30 m의 공간해상도로 구축하였다. SWAT 모형의 유출 검보정 후 수위관측소 지점에서 평균 $R^2$를 산정한 결과 도치(0.80), 동향(0.72), 석정(0.64), 주천(0.80), 천천(0.80), 용담댐(0.72)로 높은 상관성을 나타냈으며, 유출 검보정 후 SWAT 모형의 증발산량 모의 결과를 바탕으로 SEBAL 모형과의 공간 증발산량을 비교하였다. 두 모형의 증발산량은 SEBAL 모형의 경우 지형에 따라 SWAT 모형은 토양 특성에 따라 분포하는 경향이 다르게 나타났다. SEBAL 모형은 주로 저지대에서 증발산량이 높게 산정되며 고지대로 갈수록 감소하여 증발산량이 지형의 고저차에 따라 분포하는 모습을 보였다. SWAT 모형은 토양 특성에 따라 증발산량이 분포하며 유역 내에서 뚜렷한 차이를 나타내지는 않았다. 월별 총 증발산량은 SWAT 모형의 경우 7~8월에 약 90 mm/mon로 가장 높게 나타나고 1~2월은 0 mm/mon로 계절별 변화폭이 컸으나, SEBAL 모형의 경우 5~6월에 증발산량이 약 60 mm/mon로 가장 높게 나타났고 계절별 변화 폭이 SWAT 모형에 비해 적은 모습을 보였다. 이는 위성영상을 기반으로 하는 SEBAL 모형의 특성상 장마 기간에 해당하는 7~8월은 구름으로 인해 일사량이 적게 계산되고, 그 결과 5~6월에 비해 증발산량이 작게 산정되는 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.628-628
• /
• 2015

유역의 형상은 강우, 산사태 등과 같은 지배적인 침식작용과 더불어 지형 지질학적 요인들에 의해 결정되어 진다. 그러므로 유역형상에 대한 공간특성 분석을 위해서는 지형학적 요인과 다양한 침식작용에 대한 분석이 필요하다. 국내 외 많은 연구결과에 의하면 지형학적 인자에 의한 침식 형태는 국부경사와 집수면적의 크기에 의해 다양한 구간으로 나뉘며, 그 특성에 따라 지표침식, 세굴, 산사태 등으로 구분되는 것으로 연구된 바 있다. 일례로 유역 내 세굴과 관련된 지배인자는 집수면적보다는 국부경사에 반대로 지표침식, 산사태는 국부경사보다는 집수면적의 크기에 따라 영향을 받는다. 따라서 지형학적 인자(국부경사, 집수면적)의 임계치(threshold) 산출을 통해 침식특성(불안정지역)을 검토할 수 있으며, 이에 대한 물리적 검증은 여러 연구를 통해 물질플럭스(유량, 에너지)에 대한 Power Law로써 검증된바 있다. 본 연구에서는 이러한 지형학적 침식특성 분석을 위하여 2006년 집중호우에 의해 광역적 산사태가 발생한 강원도 평창군 진부면 일대의 $10m{\times}10m$ DEM로부터 국부경사, 집수면적을 산출하고 경사-면적한계곡선(Slope-Area Threshold Curve, SATC), 배수면적 확률분포곡선(Probability distribution of Drain Areas Curve, PDAC), 에너지지수 확률분포곡선(Probability distribution of Energy Index Curve, PEIC)를 실제 산사태지점과 중첩하여 도시하였다. 그 결과, 특정 임계구간(Threshold Area, Unstable area, 2~3권역)내에서 산사태 발생지점이 분포하는 것으로 분석되었다. 이를 통해 지형학적 인자만을 고려하여 미계측 유역에 대한 잠재적 불안정지역의 판별이 가능할 것으로 판단되며, 추후 광역적 사면안정해석에 적용 가능할 것으로 판단된다.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.4
• /
• pp.352-359
• /
• 2017

Because the Energy Efficiency Design Index(EEDI) came into effect in 2013, it is necessary to develop a new technology to overcome $CO_2$ emission regulations. In structural design viewpoint, lots of researches are carried out to develop eco-friendly and high fuel efficiency ships by weight reduction. By using the automated compartment arrangement system and automated structural design algorithm which were developed by the authors, new researches are performing to combine the above two systems. However, the effect of weight reduction was not significant because structural designs by using these systems for the midship part was carried out only focused on the minimum still water bending moment. In this paper, at first, good compartment arrangements which give the minimum still water bending moment and(or) shear force were chosen by using the automated compartment system. And then, influence of shear force on weight reduction was investigated by using the automated structural design algorithm considering longitudinal strength, local strength and shear strength of longitudinal members in cargo holds. Conclusively, it is necessary to consider the minimum still water bending moment and shear force simultaneously to reduce the weight of mid-sized bulk carrier. Also, good compartment arrangement which gives much more weight reduction compared with existing ship was proposed.

• Steel and Composite Structures
• /
• v.25 no.2
• /
• pp.157-175
• /
• 2017

The novelty of this work is the use of a new displacement field that includes undetermined integral terms for analyzing thermal buckling response of functionally graded (FG) sandwich plates. The proposed kinematic uses only four variables, which is even less than the first shear deformation theory (FSDT) and the conventional higher shear deformation theories (HSDTs). The theory considers a trigonometric variation of transverse shear stress and verifies the traction free boundary conditions without employing the shear correction factors. Material properties of the sandwich plate faces are considered to be graded in the thickness direction according to a simple power-law variation in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic material. The thermal loads are assumed as uniform, linear and non-linear temperature rises within the thickness direction. An energy based variational principle is employed to derive the governing equations as an eigenvalue problem. The validation of the present work is checked by comparing the obtained results the available ones in the literature. The influences of aspect and thickness ratios, material index, loading type, and sandwich plate type on the critical buckling are all discussed.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3413-3420
• /
• 2021

Applying the available neutron flux for medical and industrial purposes is the most important application of research reactors. The neutron radiography system is used for non-destructive testing (NDT) of materials so that it is one of the main applications of nuclear research reactors. One of these research reactors is the 5 MW pool-type light water research reactor of Tehran (TRR). This work aims to investigate on materials and location of the beam tube (BT) of the TRR radiography system to improve the index parameters of BT. Our results showed that a through-type BT with 20 cm thick carbon neutron filter, 1.2 cm and 9.4 cm of the diameter of inlet (D₁) and output (D₂) BT, respectively gives thermal neutron flux almost 25.7, 5.6 and 1.1 times greater than the former design of the TRR (with D₁ = 1.8 cm and D₁ = 9.4 cm), previous design of the TRR with D₁ = 3 cm and D₁ = 9.4 cm, and another design with D₁ = 5 cm and D₁ = 9.4 cm, respectively. Therefore, the design proposed in this paper could be a better alternative to the current BT of the TRR.

• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.19-26
• /
• 2021

In this paper, we carried out the process modelling and economical analysis of the 500 kg-H₂/d-class green hydrogen production system process based on biomethane from the Food Bio Energy Center in Chungju. As a result of economic analysis, the NPV(Net present value) after 15 years of operation is 3.831 billion won, the PI(Profitability index method) is 1.42. It was found that the project of 500 kg-H₂/d-class green hydrogen production system has a 20.25% of IRR, which is higher than social discount rate of 4.5% and feasibility is ensured.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2900-2922
• /
• 2021

In this paper, the power spectral density(PSD) for Multilevel Minimum Shift Keyed signal with modulation index h = 1/2 (M-ary MSK) are derived using the mathematical method of the Markov Chain model. At first, according to an essential requirement of the phase continuity characteristics of MSK signals, a complete model of the whole process of signal generation is built. Then, the derivations for autocorrelation functions are carried out precisely. After that, we verified the correctness and accuracy of the theoretical derivation by comparing the derived results with numerical simulations using MATLAB. We also divided the spectrum into four components according to the derivation. By analyzing these figures in the graphic, each component determines the characteristics of the spectrum. It is vital for enhanced spectral characteristics. To more visually represent the energy concentration of the main flap and the roll-down speed of the side flap, the specific out-of-band power of M-ary MSK is given. OMLCD(Optimum Maximum Likelihood Coherent Detection) of M-ary MSK is adopted to compare the signal received with prepared in advance in a code element T to go for the best. And M-ary MSK BER(Bit Error Rate) is compared with the same ary PSK (Phase Shift Keying) with M=2,4,6,8. The results show the detection method could improve performance by increasing the length of L(memory inherent) in the phase continuity.

• Journal of Navigation and Port Research
• /
• v.45 no.3
• /
• pp.165-172
• /
• 2021

Breaking wave is one of the important design factors in the design of coastal and port structures as they are directly related to various physical phenomena occurring on the coast, such as onshore currents, sediment transport, shock wave pressure, and energy dissipation. Due to the inherent complexity of the breaking wave, many empirical formulas have been proposed to predict breaker indices such as wave breaking height and breaking depth using hydraulic models. However, the existing empirical equations for breaker indices mainly were proposed via statistical analysis of experimental data under the assumption of a specific equation. In this study, a new Munk-type empirical equation was proposed to predict the height of breaking waves based on a representative linear supervised machine learning technique with high predictive performance in various research fields related to regression or classification challenges. Although the newly proposed breaker height formula was a simple polynomial equation, its predictive performance was comparable to that of the currently available empirical formula.

• Korean Journal of Community Nutrition
• /
• v.24 no.4
• /
• pp.309-320
• /
• 2019

Objectives: This study was undertaken to compare dietary life of the elderly living alone and in a family, and to compare differences based on gender, for the 2013-2016 Korea National Health and Nutrition Examination Survey (KNHANES). Methods: The subjects included 2,612 elderly people aged over 65 years who participated in the health survey, health examination and nutrition survey. Subjects on a diet therapy were excluded. This study analyzed the general characteristics, dietary habits, daily energy and nutrient intakes, CPF ratio, estimated average requirement (EAR), nutrient adequacy ratio (NAR) and mean adequacy ratio (MAR), index of nutrient quality (INQ), and food consumption of the elderly living alone and in a family. We also compared the differences based on gender. Results: Daily intake of food, water, dietary fiber, potassium, retinol, and riboflavin were low in the male elderly subjects living alone. The elderly living with family revealed higher NAR and MAR as compared to the elderly living alone. Although all MAR values were <1, the elderly living alone had lower values. Considering the intake of food, the consumption of seaweed, fish and shellfish, and oils (animal) was higher in elderly men living with families, whereas women living with families consumed more vegetables, fruits, seaweeds and seafood, as compared to their counterparts living alone. Furthermore, analyzing the foods consumed by the elderly people living alone, female subjects consumed more seaweed, milk and animal oil as compared to male subjects. Conclusions: The results of this study indicate that the elderly living alone have poor nutrient intake as compared to the elderly living with families. Based on this research data, we recommend that it is necessary to improve the health and nutritional status of the elderly living alone.