• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.94.2-94.2
• /
• 2012

에너지 하베스터에 적용 가능한 $0.72Pb(Zr_{0.47}Ti_{0.53})O_3-0.28Pb((Ni_{0.55}Zn_{0.45})_{1/3}Nb_{2/3})O_3$ (PPZNN) 후막세라믹의 구조적 압전 특성을 조사하였다. $850^{\circ}C$에서 하소를 마친 파우더를 72시간 볼 밀링 처리한 후, 테잎 캐스팅 공정을 이용하여 0.3mm의 두께로 PPZNN 압전 세라믹을 제조하였다. $900^{\circ}C$에서 $1200^{\circ}C$까지 다양한 온도에 소결하여 온도가 증가될수록 정방형 구조로 상전이 거동하는 모습을 보였으며, 특히 $1050^{\circ}C$에서 소결된 PPZNN후막 세라믹은 이차상이 없는 고밀도의 미세구조가 관찰되었다. $d_{33}$=440 pC/N 그리고 kp = 0.46의 우수한 압전 특성을 보였으며, 에너지 변환 성능을 나타내는 $d33{\cdot}g33$ 값은 약 $20439{\times}10^{-15}\;m^2/N$ 로 매우 우수하였다. PPZNN후막 세라믹을 유니몰프 켄틸레버 형태로 제작하여 발전 평가하였을 때 저항이 470 $k{\Omega}$에서 969 ${\mu}W$ (4930 ${\mu}W/cm^3$)로 관찰되었다. PPZNN 후막 압전 세라믹은 향후 압전에너지 하베스터 소재로 다양한 응용분야에 사용될 것으로 예상된다.

• 대한기계학회논문집A
• /
• 제34권7호
• /
• pp.867-872
• /
• 2010

자연계에 존재하지만 사용되지 못 하고 버려지는 에너지를 효과적으로 채집하여 배터리를 충전하거나 전기 장치에 전기 에너지를 공급하는 에너지 하베스팅에 대한 연구를 수행하였다. 압전재료는 물체의 움직임이나 진동으로부터 에너지를 채집하는 주요한 재료로 널리 연구되고 있다. 본 논문에서는 기존의 PZT 압전 특성을 개량하고자 압전-복합재료 발전소자(Piezo-Composite Generating Element, 이하 PCGE)를 도입하여 성능 예측모델을 제안하고 이를 실험적으로 검증하였다. PCGE는 탄소/에폭시, PZT, 유리/에폭시 층으로 구성된다. 제작 과정에서 적층된 PCGE는 오토클레이브 안에서 $177^{\circ}C$의 온도에서 성형되는데, 이때 PCGE 내부에 초기잔류응력이 발생하게 되어 압전재료의 성능이 변화하게 된다. 세 종류의 PCGE를 제작한 후 에너지 채집 실험을 수행하여 제안된 성능 예측모델의 타당성과 기계적 진동을 전기적 에너지로 변환되는 성능을 검증하였다. 실험 결과 이론적인 성능 예측모델이 실험 결과와 잘 일치함을 확인하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.221-221
• /
• 2014

The current energy crisis in many countries has led to the search of an efficient renewable energy source. Among those the solar energy is the most abundant and easily available. However harvesting the solar energy requires a much efficient device. Lot of research has been done in this regard and so far the efficiency of traditional solar cell stands around ~50% and for PET films it is much lesser. The potential application of PET films in the solar cells can be very promising provided the fact that the PET film is lighter and logistically more viable. There is a lot of work that is being done to increase the efficiency of PET based solar cells. The base electrode plays a vital role in increasing the efficiency of the cell.

• Composites Research
• /
• 제35권6호
• /
• pp.371-377
• /
• 2022

마찰대전 나노발전기(triboelectric nanogenerator, TENG) 장치는 최근 몇 십여년 동안 많은 관심을 불러일으켰다. 주변에서 버려지는 에너지 중 기계적 에너지를 수확하는 기술 중 하나인 TENG 기술은 정전기 유도 및 마찰 대전의 이중 효과로 얻어진다. 특히, 나노 로봇이나 마이크로 전자기계 장치와 같은 초소형 전자 장치의 급속한 발전으로 초박막 장치에 대한 수요가 크게 증가했다. TENG 기술의 급속한 성장과 함께 높은 전기 출력 성능과 저렴한 제조 기술을 갖춘 적절한 마찰대전 재료를 선택하는 것은 지속 가능한 나노발전기 작동에 필수적이다. 최근 이러한 문제를 극복하기 위한 하나의 방법으로 다층박막적층법 (혹은 층상자기조립법, layer-by-layer (LbL)self-assembly technique)이 고려되고 있다. 이 LbL 자기조립 기술은 TENG의 성능 향상 및 응용 분야에서 두께 문제를 성공적으로 극복할 뿐만 아니라 저비용, 친환경 공정을 제시했으며 대규모 생산에 사용할 수 있다. 본 리뷰에서는 TENG 장치를 위한 LbL 기반의 소재 개발에 있어 최근의 연구들을 검토하였으며, 현재까지 검토된 에너지 수확 장치 분야에서의 잠재력을 살펴보았다. LbL 기술을 적용하여 제작한 TENG 장치의 이점에 대해 논의하고, 마지막으로 다양한 초박형 TENG 구현을 위한 본 제작 기술의 방향과 관점을 간략하게 제시하였다.

• 한국정보기술학회논문지
• /
• 제16권12호
• /
• pp.101-107
• /
• 2018

다양한 분야에 적용이 확대되고 있는 무선 센서 네트워크 기술은 센서들의 전력공급 및 전원관리 문제가 가장 큰 핵심이 되고 있다. 이러한 이유에서 새로운 개념의 전력공급장치와 전원관리장치가 요구된다. 이에 본 논문에서는 송전선에 흐르는 전류를 이용하여 전자기유도 원리에 의한 에너지 하베스팅 기술을 적용하여 별도의 외부 입력 없이 센서노드에 안정적인 전력을 공급하는 자율독립전원 시스템을 개발하였다. 제안한 자율독립전원 시스템은 Power CT를 활용한 전력공급장치와 충전회로를 포함한 전원관리장치로 구성되었다. 전원관리장치는 배터리의 충전의 안전성을 확보하기 위하여 전압제한회로, 충전전압/전류 모니터링 회로를 적용하였다. 제안된 시스템의 성능검증을 위하여 SVL진단장치에 적용하여 실험한 결과 안정적으로 운용됨을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1303_1304
• /
• 2009

With recent advanced in portable electric devices, wireless sensor, MEMS and bio-Mechanics device, the new typed power supply, not conventional battery but self-powered energy source is needed. Particularly, the system that harvests from their environments are interests for use in self powered devices. For very low powered devices, environmental energy may be enough to use power source. Therefore, in other to made piezoelectric energy harvesting device. The made 31type triple-morph cantilever was resulted from the conditions of $100k{\Omega}$, 0.25g, 154Hz respectively. The thick film was prepared at the condition of 6.57Vrms, and its power was $432.31{\mu}W$ and its thickness was $50{\mu}m$. And than, the fabricated piezoelectric cantilever was packaged for application.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.193-193
• /
• 2008

Wearable and ubiquitous micro systems will be greatly growing and their related devices should be self-powered in order to avoid the replacement of finite power sources, for example, by scavenging energy from the environment. With ever reducing power requirements of both analog and digital circuits, power scavenging approaches are becoming increasingly realistic. One approach is to drive an electromechanical converter from ambient motion or vibration. Vibration-driven generators based on electromagnetic, electrostatic and piezoelectric technologies have been demonstrated. Among various generator types proposed so far, piezoelectric generator possesses considerable potential in micro system. To overcome low mechanical-to-electric energy conversion, the piezoelectric device should activate in resonance mode in response to external vibration. Normally, the external vibration excretes at low frequency ranging 0.1 to 200 Hz, whereas the resonant frequencies of the devices are fixed as constant. Therefore, keeping their resonant mode in varying external vibration can be one of important points in enhancing the conversion efficiency. We investigated the possibility of use of multi-bender type piezoelectric devices. To match the external vibration frequency with the device resonant frequency, the various devices with different resonant frequency were chosen.

• 한국전기전자재료학회논문지
• /
• 제23권3호
• /
• pp.250-259
• /
• 2010

The ability for energy harvesting via the piezoelectric effect was studied for a unimorph element such as piezo buzzer. A simple equivalent circuit was proposed to predict the energy generated based on the internal stress. Unimorphs with a metal-cavity were used as a driving device of the generation panel. Both the AC open voltage and DC output voltage as a function of pressure period and number of element were measured. For the unimorph generation circuit, DC output voltage varies with pressure period, reaching a maximum value at $470{\mu}F$. The maximum output voltage a according to load resistance was measured at $1M{\Omega}$. Data analysis of the DC output voltage and time constant indicated that number of piezoelectric element of optimum was 60~80. It was found that piezoelectric unimorph has the possibility to be used as the driving element of the electric generation.

• 한국재료학회지
• /
• 제32권11호
• /
• pp.508-514
• /
• 2022

Piezoelectric composite films which are enabled by inorganic piezoelectric nanomaterials-embedded polymer, have attracted enormous attention as a sustainable power source for low powered electronics, because of their ease of fabrication and flexible nature. However, the absorption of applied stress by the soft polymeric matrices is a major issue that must be solved to expand the fields of piezoelectric composite applications. Herein, a flexible and porous piezoelectric composite (piezoelectric sponge) comprised of BaTiO₃ nanoparticles and polydimethylsiloxane was developed using template method to enhance the energy conversion efficiency by minimizing the stress that vanishes into the polymer matrix. In the porous structure, effective stress transfer can occur between the piezoelectric active materials in compression mode due to direct contact between the ceramic particles embedded in the pore-polymer interface. The piezoelectric sponge with 30 wt% of BaTiO₃ particles generated an open-circuit voltage of ~12 V and a short-circuit current of ~150 nA. A finite element method-based simulation was conducted to theoretically back up that the piezoelectric output performance was effectively improved by introducing the sponge structure. Furthermore, to demonstrate the feasibility of pressure detecting applications using the BaTiO₃ particles-embedded piezoelectric sponge, the composite was arranged in a 3 × 3 array and integrated into a single pressure sensor. The fabricated sensor array successfully detected the shape of the applied pressure. This work can provide a cost-effective, biocompatible, and structural strategy for realizing piezoelectric composite-based energy harvesters and self-powered sensors with improved energy conversion efficiency.

• Journal of Communications and Networks
• /
• 제14권2호
• /
• pp.188-194
• /
• 2012

Cognitive networks (CNs) are capable of enabling dynamic spectrum allocation, and thus constitute a promising technology for future wireless communication. Whereas, the implementation of CN will lead to the requirement of an increased energy-arrival rate, which is a significant parameter in energy harvesting design of a cognitive user (CU) device. A well-designed spectrum-sensing scheme will lower the energy-arrival rate that is required and enable CNs to self-sustain, which will also help alleviate global warming. In this paper, spectrum sensing in a multi-user cognitive ad hoc network with a wide-band spectrum is considered. Based on the prospective spectrum sensing, we classify CN operation into two modes: Distributed and centralized. In a distributed network, each CU conducts spectrum sensing for its own data transmission, while in a centralized network, there is only one cognitive cluster header which performs spectrum sensing and broadcasts its sensing results to other CUs. Thus, a wide-band spectrum that is divided into multiple sub-channels can be sensed simultaneously in a distributed manner or sequentially in a centralized manner. We consider the energy consumption for spectrum sensing only of an analog-to-digital convertor (ADC). By formulating energy consumption for spectrum sensing in terms of the sub-channel sampling rate and whole-band sensing time, the sampling rate and whole-band sensing time that are optimal for minimizing the total energy consumption within sensing reliability constraints are obtained. A power dissipation model of an ADC, which plays an important role in formulating the energy efficiency problem, is presented. Using AD9051 as an ADC example, our numerical results show that the optimal sensing parameters will achieve a reduction in the energy-arrival rate of up to 97.7% and 50% in a distributed and a centralized network, respectively, when comparing the optimal and worst-case energy consumption for given system settings.