• 국제초고층학회논문집
• /
• 제7권2호
• /
• pp.161-170
• /
• 2018

Rapid urbanization, resource depletion, and limited land are further increasing the need for skyscrapers in city centers; therefore, it is imperative to enhance tall building performance efficiency and energy-generative capability. Potential performance improvements can be explored using parametric multi-objective optimization, aided by evaluation tools, such as computational fluid dynamics and energy analysis software, to visualize and explore skyscrapers' multi-resource, multi-system generative potential. An optimization-centered, software-based design platform can potentially enable the simultaneous exploration of multiple strategies for the decreased consumption and large-scale production of multiple resources. Resource Generative Skyscrapers (RGS) are proposed as a possible solution to further explore and optimize the generative potentials of skyscrapers. RGS can be optimized with waste-energy-harvesting capabilities by capitalizing on passive features of integrated renewable systems. This paper describes various resource-generation technologies suitable for a synergetic integration within the RGS typology, and the software tools that can facilitate exploration of their optimal use.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.397-397
• /
• 2016

Triboelectric nanogenerators (TENG) can produce power from ambient mechanical sources and have strong points of high output performance, light weight, low cost, and easy manufacturing process. It is expected that TENG can be utilized in the fields of wireless electronics and self-powered devices in the world which pays attention to healthcare and the IoT. In this work, we focus on scavenging ambient rotational energy by using a durably designed TENG. In previous studies regarding harvesting rotation mode energy, the devices were based on sliding mechanism and durability was not considered as a major issue. However friction by rotation causes reliability problems due to wear and tear. Therefore, in this study, we convert rotary motion to linear motion utilizing a cam by which we can then utilize contact-mode TENG and improve device reliability. In order to increase output performance, bumper springs were used below the TENG and the optimum value for the bumper spring constant was analyzed theoretically. Furthermore, the inserting a soft substrate was proposed and its effect on high output was determined to be due to an increase in the contact area. By increasing the number of cam noses, the output frequency was shown to increase linearly. For the purpose of maximum power transfer, the input impedance of the device was determined. Finally, to demonstrate the use of the C-TENG as a direct power source, it was installed on a commercial bicycle wheel and connected to 180 LEDs. In conclusion we present a rotational motion TENG energy scavenger system designed for enhanced durability and optimized output by appropriate choice of spring constants and substrate.

• 한국도로학회논문집
• /
• 제14권2호
• /
• pp.37-44
• /
• 2012

세계각국에서 홍수, 태풍과 같은 자연재해가 많이 발생하고 있다. 이러한 자연재해가 발생하는 원인으로는 지구온실가스 배출 증가에 따른 지구온난화 현상 때문이다. 지구온난화를 막기 위해, 많은 연구진들이 신재생에너지에 대한 연구를 진행하고 있다. 정부는 온실가스배출량을 감축하여 지구온난화를 막기위해 "저탄소 녹색성장"의 국가정책 하에서 신재생에너지와 같은 친환경적인 녹색산업에 많은 관심과 투자에 집중하고 있다. 연구팀들은 도로를 주행하는 차량으로부터 전달되는 역학전 에너지를 이용하여 신재생에너지를 생산하는 연구를 진행하고 있다. 본 논문에서는 압전세라믹의 크기와 연결방식에 따른 연구 결과를 나타내고 있다. 또한 실험변수에 따른 압전세라믹의 파워특성을 측정하여 분석을 하였다.

• Journal of Communications and Networks
• /
• 제18권6호
• /
• pp.926-937
• /
• 2016

In this paper, we study the feasibility of receiver diversity for application to downlink cellular networks, where low-energy devices are equipped with information decoding and energy harvesting receivers for simultaneous wireless information and power transfer. We compare several options that are based on selection combining and maximum ratio combining, which provide different implementation complexities. By capitalizing on the Frechet inequality, we shed light on the advantages and limitations of each scheme as a function of the transmission rate and harvested power that need to be fulfilled at the low-energy devices. Our analysis shows that no scheme outperforms the others for every system setup. It suggests, on the other hand, that the low-energy devices need to operate in an adaptive fashion, by choosing the receiver diversity scheme as a function of the imposed requirements. With the aid of stochastic geometry, we introduce mathematical frameworks for system-level analysis. We show that they constitute an important tool for system-level optimization and, in particular, for identifying the diversity scheme that optimizes wireless information and power transmission as a function of a sensible set of parameters. Monte Carlo simulations are used to validate our findings and to illustrate the trade-off that emerge in cellular networks with simultaneous wireless information and power transfer.

• 동력기계공학회지
• /
• 제15권5호
• /
• pp.49-53
• /
• 2011

This study concerns about wireless power generation that uses the energy harvester with EAP actuator. The UWSN(Underwater Wireless Sensor Network) has been considered many times by many researches. Because the information of underwater is getting important to secure the resource or to predict the meteorological phenomena. But the sensor node in the UWSN is driven by the acoustic wave to communicate with other sensor node. And this acoustic wave usually spends a 100 times energy than the RF(Radio Frequency) wave due to transfermation medium(sea water). Therefore the power source of the sensor node is very important that is needed to improve in the UWSN. For this purpose, the energy harvester is made by the acrylic elastomer in this study. And the electrode is modified with an aluminum impurity to improve the efficiency of energy harvester. After that, the modified energy harvester is experimented to confirm the improvement of the energy efficiency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권2호
• /
• pp.1250-1264
• /
• 2017

This paper presents the architecture design, implement, experimental validation of a bistatic backscatter wireless communication system in Wi-Fi network. The operating principle is to communicate a tag's data by detecting the power level of the power modulated Wi-Fi packets to be reflected or absorbed by backscatter tag, in interconnecting with Wi-Fi device and Wi-Fi AP. This system is able to provide the identification and sensor data of tag on the internet connectivity without requiring extra device for reading data, because this uses an existing Wi-Fi AP infrastructure. The backscatter tag consists of Wi-Fi energy harvesting part and a backscatter transmitter/a power-detecting receiver part. This tag can operate by harvesting and generating energy from Wi-Fi signal power. Wi-Fi device decodes information of the tag data by recognizing the power level of the backscattered Wi-Fi packets. Wi-Fi device receives the backscattered Wi-Fi packets and generates the tag's data pattern in the time-series of channel state information (CSI) values. We believe that this system can be achieved wireless connectivity for ultra- low-power IoT and wearable device.

• 전자공학회논문지
• /
• 제50권6호
• /
• pp.105-113
• /
• 2013

본 논문에서는 0.5V 이하의 낮은 전압을 출력하는 초소형 PV(photovoltaic) 셀을 이용한 MPPT(Maximum Power Point Tracking) 제어 기능을 갖는 마이크로 빛에너지 하베스팅 시스템을 제안한다. MPPT 제어는 PV 셀의 개방전압과 MPP(Maximum Power Point) 전압간의 비례관계를 이용하여, 파일럿(pilot) PV 셀로 하여금 주(main) PV 셀의 MPP를 실시간 추적할 수 있도록 설계하였다. 제안된 회로는 0.18um CMOS 공정으로 설계되었으며, 칩 면적은 부하단 전하펌프와 패드를 포함하여 $900um{\times}1370um$이다. 제작된 칩을 측정한 결과 설계된 회로가 빛 세기의 변화에 따른 MPP 전압 변화를 실시간 트래킹하는 것을 확인하였다. 또한 MPPT 제어기능을 적용했을 때 부하가 큰 경우에도 MPP 근처의 전압을 부하에 공급함으로써 MPPT 제어기능을 적용하지 않았을 때에 비해 더 많은 전력을 부하로 공급하는 것을 확인하였다. 기존의 마이크로 빛에너지 하베스팅 회로에 비해 제안된 회로는 제어회로 구동을 위해 미리 충전된 배터리가 필요하지 않기 때문에 배터리를 사용하지 않는 초소형 자가발전 시스템에 적합하다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권4호
• /
• pp.1889-1910
• /
• 2017

This paper investigates a protocol so-called Adaptive Harvest Then Transmit (AHTT) for wireless powered communication networks (WPCNs) in multiple-input single-output (MISO) downlink systems, which assists in transmitting signals from a multi-antenna transmitter to a single-antenna receiver. Particularly, the power constrained relay is supplied with power by utilizing radio frequency (RF) signals from the source. In order to take advantage of multiple antennas, two different linear processing schemes, including Maximum Ratio Combining (MRC) and Selection Combination (SC) are studied. The system outage capacity and ergodic capacity are evaluated for performance analysis. Furthermore, the optimal power allocation is also considered. Our numerical and simulation results prove that the implementation of multiple antennas helps boost the energy harvesting capability. Therefore, this paper puts forward a new way to the energy efficiency (EE) enhancement, which contributes to better system performance.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.550-553
• /
• 2009

도로 환경 모니터링을 위한 센서 노드의 전력원으로 유도풍을 이용한 압전에너지 하베스팅 기술은 기존 재생 에너지의 설치 및 작동 조건에 영향을 받지 않고, 도로상에 주오염원인 자동차에서 발생되는 폐에너지를 활용하는 친환경적 에너지 순환시스템을 구현하는 핵심 요소이다. 차량 유도풍에 의해 발생되는 풍압으로 도로 상의 구조물에 진동을 유발한다. 이 때 발생한 진동 에너지는 압전체를 통해 전기 에너지로 변환, 저장할 수 있다. 이렇게 저장된 에너지는 센서의 구동과 무선 데이터 송수신을 위한 센서 노드의 전력원으로 사용함으로써 별도의 전력원이 필요없게 된다. 본 연구에서는 60km/h로 주행하는 한 대의 차량에 의해 2.7m/s의 유도풍이 발생하여 0.6g로 도로 상의 구조물에 에너지를 전달하게 된다. 전달된 에너지가 압전체를 통해 15uJ 전기에너지로 저장된다.

• 한국소음진동공학회논문집
• /
• 제25권6호
• /
• pp.406-413
• /
• 2015

The piezoelectric coupling in piezoelectric vibration energy harvesters with load resistance induces electrical damping as well as increase in the system stiffness. Starting from analytically deriving the explicit relations through governing equations in the frequency domain, this work identifies the characteristics of the electrically induced damping mechanism and shows that the electrically induced damping serves as a structural hysteretic damping on condition that a piezoelectric vibration energy harvester is excited at its short-circuit resonant frequency and its load resistor is optimally impedance- matched at the same time. Finally, it is analytically verified that the equivalence of a mechanical and an electrically induced damping ratio is required for the maximum power generation at a load resistor, which was claimed in some literature.