• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.296-300
• /
• 2015

ALDC8 (Al-Si-Cu) alloy has been often corroded with pattern of intergranular corrosion in corrosive environments. Thus, in order to improve its corrosion resistance, the effect of annealing heat treatment to corrosion resistance and hardness was investigated with parameters of heating temperatures such as $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$, $400^{\circ}C$ and $500^{\circ}C$ for 1hr. The hardness was varied with annealing temperature and slightly decreased with annealing heat treatment. However, the relation between annealing temperature and hardness agreed not well each other. Corrosion potential was shifted to noble direction and corrosion current density was also decreased with increasing annealing temperature. Moreover, both AC impedance at 10 mHz and polarization resistance on the cyclic voltammogram curve were also increased with increasing annealing temperature. Furthermore, intergranular corrosion was somewhat observed in non heat treatment as well as annealing temperatures at $100^{\circ}C$, $200^{\circ}C$ and $300^{\circ}C$, while, intergranular corrosion was not nearly observed at annealing temperature of $400^{\circ}C$, $500^{\circ}C$. Consequently, it is considered that the annealing heat treatment of ALDC8 alloy may be an available method not only to inhibit its intergranular corrosion but also to improve its corrosion resistance.

• 대한화학회지
• /
• 제54권3호
• /
• pp.275-282
• /
• 2010

분자 내 수소결합 가능성을 가지고 있는 2-fluorocyclopropanemethanol과 2-chlorocyclopropanemethanol에 대하여 MP2/6-311++G(d,p) 방법과 B3LYP/6-311++G(d,p) 방법으로 최적화 계산을 수행하였다. 두 분자 모두 가장 안정한 conformer에서 O-H의 수소가 F나 Cl을 향하고 있어 수소결합 가능성을 보이기는 하나 $H{\cdots}F$, $H{\cdots}Cl$ 거리가 van der Waals radii보다 커서 강한 수소결합이라 보기 힘들고 두 번째 안정한 conformer의 경우가 가까운 $H{\cdots}F$, $H{\cdots}Cl$ 거리를 보이며 더 강한 수소결합 가능성을 보였다. 그러나 에너지가 5 ~ 7 kJ 더 높게 나타났다. Methanol group과 F나 Cl이 서로 반대 방향을 향할 때 일반적으로 안정하나 앞의 가장 안정한 conformer보다는 에너지가 높다.

• 한국환경과학회지
• /
• 제24권3호
• /
• pp.339-352
• /
• 2015

This study analyzed the change in tropical cyclone (TC) activity according to the fluctuation in July-to-September average North Pacific Oscillation index (NPOI) and its underlying large-scale environment during the last 37 years from 1977 to 2013. For this purpose, seven years with highest index NPOI value (positive NPOI phase) and another seven years with lowest NPOI index value (negative NPOI phase) among the 37 years were selected as sample after excluding the ENSO years. During the positive NPOI phase, TCs were created in the east of tropical and subtropical western North Pacific and moved to the west from the Philippines toward the southern region in China or toward far eastern sea of Japan. Meanwhile, during the negative NPOI phase, TCs tended to proceed to the north toward Korea or Japan passing East China Sea from the eastern sea of the Philippines. As a result, also in the TC recurvature, TCs in positive NPOI phase showed a tendency of recurving toward more eastern direction compared to TCs in negative NPOI phase. Hence, TC intensity was stronger in negative NPOI phase which allowed more time for obtaining energy from the ocean.

• 한국의상디자인학회지
• /
• 제22권2호
• /
• pp.117-136
• /
• 2020

The purpose of this study is to analyze changes in high-tech fashion along with the types and characteristics of high-tech fashion that have appeared recently providing diverse material for the fashion field. High-tech fashion requires such research to learn how much distance one has in one's life. It is also meaningful to predict what direction high-tech fashion research may be needed. For research methods, previous research and literary studies were considered and photographs in which high-tech techniques were used were collected using the keyword 'high-tech fashion'. High-tech fashion types can be organized into the four types of luminescent types, mutual interaction types, 3D printing fashion, and virtual fashion. The research results were as follows. First, luminescent fashion was an important expression method of high-tech fashion. Materials for luminescent fashion first started with LED electric wire connections and many methods have been attempted with the appearance of electrically conductive clothing material, such as luminescent lasers and beam projectors. Second, interactive high-tech fashion often appears as variable fashion. The work of Hussein Chalayan, which was combined with advanced technology, set up a base for variable type interactive high-tech fashion in the 2000s. As bioengineering technology has developed, fashion that interacts with the environment without an energy source has appeared and the interaction among fashion, people, and the environment can be seen. Third, diverse forms of expressiveness in virtual reality such as 3D CLO shows a great difference with past high-tech fashion. Simple and diverse attempts made through virtual fittings reduce the limitations of time and space, permit interaction, and add a sense of reality through speed and dynamic physical beauty. Fourth, 3D printed fashion expresses complex and detailed clothing material that is different from those before with the development of computer 3D modeling technology. Modeling that can imitate geometric and bio-engineered structures is possible and mysterious feelings are passed on to people through creative expressions.

• International journal of advanced smart convergence
• /
• 제6권1호
• /
• pp.82-88
• /
• 2017

Emergency lights and exit signs are an indispensable part of safety precautions for effective evacuation in case of emergency in public buildings. These emergency sign indicates safe escape routes and emergency doors, using an internationally recognizable sign. However visibility of those signs drops drastically in case of emergency situations like fire smoke, etc. and loss of visibility causes serious problems for safety evacuation. This paper propose a novel emergency light and exit sign built-in with Bluetooth Low Energy (BLE) Beacon to assist the emergency self-guiding evacuation using devices for crisis and emergency management to avoid panic condition inside the buildings. In this approach, the emergency light and exit sign with the BLE beacons deployed in the indoor environments and the smart devices detect their indoor positions, direction to move, and next exit sign position from beacon messages and interact with map server in the Internet / Intranet over the available LTE and/or Wi-Fi network connectivity. The map server generate an optimal emergency exit path according to the nearest emergency exit based on a novel graph generation method for less route computation for each smart device. All emergency exit path data interfaces among three system components, the emergency exit signs, map server, and smart devices, have been defined for modular implementation of our emergency evacuation system. The proposed exit sign experimental system has been deployed and evaluated in real-time building environment thoroughly and gives a good evidence that the modular design of the proposed exit sign system and a novel approach to compute emergency exit path route based on the BLE beacon message, map server, and smart devices is competitive and viable.

• 대한한의진단학회지
• /
• 제12권2호
• /
• pp.1-7
• /
• 2008

Objectives: The basis research of aged people's healthcare technology is very important, because our nation goes into an aged society rapidly. Especially in traditional medicine, pulse shapes of aged people were supposed to weak and empty pulse until now, but any objective measurement and compare research do not taken. Methods and Results: Therefore in this study we design observation study to find characteristic of pulse between younger group (age $20{\sim}30$) and elder group (age $43{\sim}80$) in Busan area. We used 3-dimensional pulse analyzer '3-D MAC' (Daeyomedi Co., Ltd.). And major parameters for comparison are 1) pulse height (h1), 2) applied pressure, 3) pulse power (energy), 4) high pressure duration (w) and 5) R-AI. Conclusions: According to analysis result, elder people's pulse has more large value in pulse height, applied pressure and pulse power than younger's that. It reveals that elder people in modernized lifestyle has Yang symptoms as well Yin symptoms. Consequently we need new method to care elder people's health, and this means more important direction than old text book. From now on verification research with objective diagnosis device like 3-D MAC, must be activated to build of evidence in traditional medicine. Cause traditional medicine's spirit of care and prevention is suitable to care elder people's cardiac and cerebral vascular disease those are have close relation with elder people.

• KIEAE Journal
• /
• 제14권1호
• /
• pp.67-74
• /
• 2014

There have distinctly been no the installation criteria and maintenance management of BIPV systems, although the BIPV market is consistently going on increasing. In addition, consideration of the BIPV generation quantity which has been installed at several diverse places is currently almost behind within region in Korea. Therefore, the main aim of this study is to evaluate the BIPV generation and to be base data of reducing rate depending on regional installation angles using PVpro which was verified by measured data. Various conditions were an angle of inclination and azimuth under six major cities: Seoul, Daejeon, Daegu, Busan, Gwangju, Jeju-si for the BIPV system generation analysis. As the results, Seoul showed the lowest BIPV generation: 1,054kWh/kWp.year, and Jeju-si have 5percent more generation: 1,108.0kWh/kWp.year than Seoul on horizontal plane. Gwangju and Daejeon turned out to have similar generation of result, and Busan showed the highest generation: 1,193.5kWh/kWp.year, which was increased by over 13percent from Seoul on horizontal plane. Another result, decreasing rate of BIPV generation depending on regional included angle indicate that the best position was located on azimuth: $0^{\circ}$(The south side) following the horizontal position(an angle of inclination: $30^{\circ}$). And the direction on a south vertical position(azimuth: $0^{\circ}$, an angle of inclination: $90^{\circ}$) then turned out reducing rate about 40percent compared with the best one. Therefore, these results would be used to identify the installation angle of the BIPV module as an appropriate position.

• 보건교육건강증진학회지
• /
• 제33권4호
• /
• pp.35-46
• /
• 2016

Objectives: The purposes of this study are to refer existing and past domestic and foreign policies and to establish a comprehensive plan to reduce sugar consumption and utilize it as fundamental data to establish and implement relevant policies. Methods: Korean government analyzed domestic and foreign policies and average sugar intake to develop draft of sugar intake reduction plan. Based on the plan, objectives, sections and agendas of the plan were set after taking into account of their feasibility. Results: The policy has three directions: to help sugar intake reduction in all population groups, to create an environment which helps people to make informed decision on lower sugar choices and to lay scientific and statistical foundation for sugar intake reduction plan. The goal is to restrict average sugar intake from processed food to less than 10% of total energy intake per day. Three core strategies are to help reduce intakes of sugar in all population groups, to create an environment which helps people to make informed decision on lower sugar choices and to lay a foundation for sugar intake reduction plan. Each strategies has 2~4 projects. Conclusions: This study is expected to serve as a catalyst for carrying out the first phase of sugar intake reduction plan to help reduce sugar consumption.

• 한국해양공학회지
• /
• 제21권6호
• /
• pp.64-71
• /
• 2007

The hypothetical earthquake located on the fault zone along the western coast of Japan, where sufficient time has elapsed since the last earthquake or an earthquake has not occurred yet, is known to possess significant potential energy. The possibility of earthquake activities occurring here in the future is high. It is expected that the resulting tsunamis will cause great damage to the East Sea coast of Korea and affect parts of the southern coast as well. In this study, tsunami that may be caused by a virtual earthquake that is expected in the hypothetical earthquake, along the western coast of Japan, will be estimated using numerical simulation. From this, the effect of the tsunami originating from the hypothetical earthquake on the southeastern coast of Korea will be evaluated by examining the water level rise due to the maximum water level rise and changing time, for each point along the southeastern coast. It will be possible to use the virtual results obtained like this as important basic materials in future disaster prevention plans and designs, for determining the direction of coastal development, for arranging seashore and harbor structures and to carry out wave resistant design for the southeastern coast of Korea.

• 전자공학회논문지D
• /
• 제36D권4호
• /
• pp.48-56
• /
• 1999

본 논문에서는 초기 산소 농도가 고에너지 이온 주입시 결정 격자 손상에 의해 발생하는 산소 축적(pileup) 현상 및 주입된 불순물의 확산에 미치는 영향을 실험적으로 고찰하였다. 초기 산소 농도가 11.5, 15.5 ppma인 p-type (100)실리콘 웨이퍼에 \sup 11\B\sup +\ \sup 31\P\sup +\ 이온을 각각 1.2 MeV, 2.2 MeV 의 에너지로 1×10\sup 15\cm\sup 2\ 주입하고, 700℃(20시간)+1000℃(10시간)의 2단계 열처리를 거치 후 주입된 불순물 및 산소 농도의 분포를 이차이온질량분석기 (Secondary Ion Mass Spectrometry, SIMS)로 관찰하였으며 잔류 2차 결함의 분포는 투과전자현미경(Transmission Electron Microscopy, TEM)으로 관찰하였다. SIMS 측정 결과 산소의 축적이 {{{{ { R}_{ } }}}}\sub p\(projected range) 부근에서 관찰되었으며 열처리 후에도 상당한 양의 2차 결합 띠가 {{{{ { R}_{ } }}}}\sub p\부근에서 관찰되는 것으로 보아 2차 결함에 의해 산소가 포획되었음을 알 수 있다. 또한 붕소와 인의 확산은 웨이퍼의 초기 산소 농도가 클수록 벌크 방향으로의 확산이 증대되는 현상을 볼 수 있었다.