• 유기물자원화
• /
• 제19권1호
• /
• pp.86-92
• /
• 2011

화석에너지 의존도를 줄이면서 $CO_2$ 배출량을 낮추기 위하여 정부에서는 녹색마을을 선정하고 에너지 자급률을 40% 수준으로 높이려는 계획을 추진 중이다. 본 연구는 각 농업 분야 중에서 농기계의 사용과 재배 시설에 있어서의 에너지 사용량을 파악하고 이를 바이오디젤로 대체하였을 때의 $CO_2$ 저감수준을 분석하고자 하였다. 이를 위하여, 농업 각 분야별 에너지 소비수준의 분석, 그리고 실천 가능한 신재생 에너지원의 선정이 요구된다. 경종재배의 전체 연간온실가스 배출량은 $5,667,258\;t-CO_2$이고, 그 중 시설 부문은 $4,932,607\;t-CO_2$인 것으로 분석되었으며, 농업시설 부문 중 에너지원별로 보면 경유가 $3,105,707\;t-CO_2$, 중유가 $1,370,578\;t-CO_2$를 배출하는 것으로 분석되었다. 우리나라 시설작물의 단위 면적당 온실가스 평균배출량은 $29,418\;t-CO_2/ha$인 것으로 나타났다. 농기계별 2007년 총에너지소비량을 살펴보면 트랙터가 284,763 kL로 가장 높게 나타났으며, 동력 경운기 221,314 kL, 곡물건조기 145,524 kL, 콤바인 72,537 kL 등의 순이었다. 전라북도 G시를 대상으로 이용 중인 시설재배와 농업기계의 이산화탄소 배출량을 비교분석한 결과, 바이오디젤로 전환하면 약 7% 정도의 $CO_2$ 감소효과가 있는 것으로 분석되었다.

• 대한환경공학회지
• /
• 제31권7호
• /
• pp.565-572
• /
• 2009

본 연구에서는 지자체 차원의 기후변화협약 대응을 위해 전라북도를 사례로 온실가스 인벤토리를 구축하고 그 결과에 따라 온실가스 저감전략 기본방향을 수립하였다. 전라북도 온실가스 배출원 분류체계는 대한민국 제3차 국가보고서의 배출원 분류 체계에 따랐으며, 제3차 국가보고서는'Revised IPCC 1996GL'을 기초로 작성되었다. 국가의 경우 에너지 공급 측면의 1차에너지를 기준으로 온실가스 배출량 산정이 가능하지만, 지역의 경우 전환부문에 대한 통제가 불가능하므로 에너지 소비 측면의 2차 에너지를 기준으로 배출량을 산정하였다(지역 전력사용은 에너지 산업부문으로 포함). 전라북도 온실가스 인벤토리 구축결과 2006년 총배출량 중 에너지 연소에 의한 이산화탄소($CO_2$)가 87.1%로 가장 많았으며, 메탄($CH_4$) 8.1%, 기타 부문 이산화탄소 ($CO_2$) 2.2%, 아산화질소($N_2O$) 1.6%, F-가스(HFCs, PFCs, $SF_6$)는 1.0%를 차지하였다. 2006년 총배출량은 에너지(88.0%), 농업(7.6%), 폐기물(2.3%), 산업공정(2.1%) 부문 순으로 배출비중이 높았으며, 에너지 부문은 전력을 포함한 에너지산업, 제조업 및 건설업, 수송, 광업/농림어업/가정상업/공공기타 순으로 발생량이 많았다. 2006년 총배출량 중 산업공정 부문은 F-가스 (HFCs, PFCs, $SF_6$)소비, 농업 부문은 벼논경작, 폐기물 부문은 소각에 의한 온실가스 배출비중이 높은 특성을 보였다. 본 연구에서는 전라북도 각 부문별 특성을 분석하여 부문별 온실가스 저감을 위한 기본방향을 수립하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1691-1707
• /
• 2009

These days, environment has became more and more important global issues including Climate Change Convention which 40 developed countries have to decrease CO2 emission by 5.2% compared with 1990 emission. Rail transport in Korea are becoming more important as a solution for environment and energy owing to high energy consumption country. Rail transport is environment-friendly mode compared with truck mode (energy consumption 14.2 times, CO2 emission 13.4 times), but it has door-to-door problem and "DMT transport system for rail logistics" can be a solution for this problem and this system can lead to environment-friendly transport mode by rail. This study will review the background of worldwide and Korean DMT system, customers' needs, and analyze transport cost with other transport mode. Through theses kinds of review and analysis, this study will propose DMT terminal, DMT rolling stock, and DMT operation system.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1117-1121
• /
• 2008

Recently energy consumption and $CO_2$ emission issue are important problem on international society. The present study has been conducted economic analysis considering economical value of $CO_2$ reduction effect. We analyze annual energy cost and annual $CO_2$ emission of the cogeneration system and gas boiler system in hotel. The first results shows that annual energy cost of cogeneration system (751,740,126 won) is more profitable than gas boiler system (801,128,408 won) by 6.2% (49,388,281 won). The second results shows that annual $CO_2$ emission of cogeneration system (3,297 ton) is less than gas boiler system (3,536 ton) by 6.8% (239 ton). The Economical value of $CO_2$ reduction effect is 4,773,898 won. The cost effect according to the reduction of $CO_2$ is corresponding to 9.7% of reduction cost for total energy cost. The result of this study means that $CO_2$ reduction effect is essential item in introduction and change of facility for economic analysis.

• Journal of Korea Trade
• /
• 제26권8호
• /
• pp.21-36
• /
• 2022

Purpose - Carbon emission standards are based on the "production-based carbon emissions" generated by the production of goods in the relevant country which were the existing measurement methods. However, can such carbon emissions measurement standards be established international? For example, some of the goods produced in developing countries are produced for the demand of developed countries. The method of measuring carbon emission based on the final demand of a certain country is called "consumption-based carbon emissions." This study compares productionand consumption-based CO₂ emissions according to economic growth in ninety-three countries categorized by income level. Design/methodology - Our empirical model considers the difference between production- and consumption-based CO₂ emissions according to economic growth. Also, our model investigated whether the EKC hypothesis in most of the previous studies that had been based on production-based emissions was also established in the consumption-based emission model. Considering the continuous characteristics of CO₂, we utilized the generalized method of moments (GMM), specifically a system GMM econometric technique because CO₂ in the previous period can affect CO₂ in the present period. Findings - Our main findings can be summarized as follows: The results show that for the consumption-based CO₂ emissions model, CO₂ continuously increases as economic growth increases in the upper-middle income countries. The inverted U-shaped result was found in the case of the production-based model. However, in the lower-income countries, an inverted-U shape in which CO₂ emissions decrease at some point as the economy grows in the production-based model does not appear. On the other hand, in the consumption-based model, an inverted U-shaped result was obtained when estimating with system-GMM. Additionally, the proportion of manufacturing, energy imports, and energy consumption had an effect on both the production- and the consumption-based model regardless of the group's CO₂ emissions. On the basis of such assessments, policymakers need to consider not only production- but also consumption-based options. Originality/value - Previous studies have mainly focused on production-based CO₂ emissions, with most of them revolving around economic growth or the effect of various social and economic factors on CO₂ emissions. However, this study considers the relationship with economic growth using consumption-based emissions as a dependent variable by classifying ninety-three countries by income level.

• 한국주거학회논문집
• /
• 제23권4호
• /
• pp.11-18
• /
• 2012

The amount of energy consumption in the buildings is approximately 20% of domestic energy consumption. The Carbon Point Program have been published on reduction of greenhouse gas emission in buildings under the paradigm of 'Low Carbon Green Growth'. This study focuses on the effect of 'Carbon Point Program' for residential buildings in Daegu. The amount of electricity and waterwork consumption and information of households were investigated to analyse the effect of carbon point program. The samples are situated in Deagu and are apartment in Bukgu and Suseonggu. The $CO_2$ emission is analysed by factors of energy resource and household organization between before participating and after participating in Carbon Point Program. The participation type has a difference of voluntary participation in Suseonggu and passive participation in Bukgu. Based on this investigation, average amount of $CO_2$ emission was reduced from voluntary participation households but all of them did not. To promote the effect of Carbon Point Program, this study proposes that needing the plans to raise will and activity of reducing carbon and to help participation which have disadvantage against achieving reduction.

• 한국건설관리학회논문집
• /
• 제14권2호
• /
• pp.78-86
• /
• 2013

지구온난화의 원인인 $CO_2$를 줄이기 위한 연구들이 전(全) 산업분야에서 활발하게 진행되고 있는 가운데, 건설분야에서도 $CO_2$의 발생을 최소화하려는 연구들이 다양하게 추진되고 있다. $CO_2$ 발생량 최소화를 위한 연구는 $CO_2$ 배출량을 기반으로 하고 있는데 $CO_2$배출량을 산정하는 방법은 크게 연료사용량 대비 탄소배출계수를 이용한 방법, LCA기반 방법론 그리고 산업연관표를 이용한 방법으로 나뉜다. 특히 연료사용량을 기반으로 탄소배출계수를 이용하는 방법은 IPCC 에서 3가지 방법(Tier1~Tier3)을 권장하고 있다. 이 중 현재 가장 많이 활용되고 있는 방법이 Tier1으로서 연료사용량과 탄소배출계수만을 이용하는 방법이다. 그러나 이 방법은 차종별 이동거리가 반영되지 않을 뿐 아니라 주행환경 등의 반영이 안되기 때문에 정확한 $CO_2$배출량을 산정할 수 없다. 특히 건설프로젝트 는 프로젝트의 특성에 따라 이산화탄소 배출량은 달라질 수 있다. 하지만 현재의 방법으로는 이러한 차이를 제대로 반영할 수 없다. 따라서 개별 프로젝트의 특성을 반영하여 이산화탄소 배출량을 산정하는 방법론이 필요하며 이러한 방법론의 가장 핵심은 에너지를 사용하는 건설장비의 이산화탄소 배출량을 직접 측정하는 것이다. 본 연구에서는 건설과정에서 발생하는 이산화탄소의 배출량 산정방법론을 개발하기 위한 연구로서 건설장비의 이산화탄소 배출량을 실시간으로 측정할 수 있는 방법의 제안을 목적으로 한다.

• 농촌계획
• /
• 제19권2호
• /
• pp.121-128
• /
• 2013

The greenhouse gas emission according to the energy consumption is the cause of global warming. With various climates, it is occurs the direct problems to ecosystem. The various studies are being to reduce the carbon dioxide, which accounts for more than 80% of the total greenhouse gas emissions. In this study, estimate the carbon usage using potential biomass extracted from forest type map according to land-use by satellite image, and estimate the amount of carbon dioxide, according to the energy consumption of urban area. The $CO_2$ adsorption is extracted by the amount of forest based on the direct absorption of tree, the other used investigated value. The $CO_2$ emission in Jecheon was 3,985,900 $TCO_2$ by energy consumption. At the land cover classification, the forest is analyzed as 624,085ha and the farmland is 148,700ha. The carbon dioxide absorption was estimated at 1,834,850 Tons from analyzed forest. In case of farmland, it was also estimated at 706,658 Tons.

• 대한토목학회논문집
• /
• 제42권3호
• /
• pp.351-357
• /
• 2022

본 연구에서는 하수재이용과 해수담수화를 동시에 진행할 수 있는 규모 1,000 m³/d의 FO-RO 융합공정과 동일한 규모의 기존 SWRO 공정의 탄소배출량을 계산하여 비교 분석하였다. FO-RO 융합공정은 FO 공정을 도입하여 RO 공정 원수를 희석시킬 수 있기 때문에 RO 공정의 요구 압력이 감소되고 이는 곧 에너지소비량 감소로 이어진다. 에너지소비량에 따른 탄소배출량은 FO-RO 융합공정이 SWRO 공정보다 -0.73 kgCO₂(coal로 전력생산 시) 낮으며, FO 공정 추가 건설로 인해 발생되는 탄소배출량은 +0.16 kgCO₂로 계산되어 FO-RO 융합공정의 총 탄소 배출량이 더 낮은 것으로 나타났다. 하지만, Coal나 oil과 같은 화석연료로 전력을 생산하지 않고, 전력생산 시 탄소배출량이 적은 nuclear나 solar 등으로 사용하면 FO-RO 융합공정의 총 탄소배출량이 SWRO 공정보다 더 높은 것으로 나타났다. 즉, 탄소배출량 관점에서는 전력생산 시 필요 재료(예: coal, oil, nuclear, solar 등)에 따라 친환경적인 공정 판단 여부가 결정되므로 FO-RO 융합공정 도입 필요성을 좌우하는 핵심 요소라고 할 수 있다.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.221-228
• /
• 2009

Recently severity of ecological adaptation and climatic change due to global warming grows larger. According to the fourth report of IPCC in 2007, emission quantity of the earth greenhouse gas(GHGs) generated by activity of mankind increased with 80% since 1970. And it is forecasted that worldwide greenhouse gas will be increased with 25~90%(corresponding to $CO_2$) between 2000 and 2030. This increment of greenhouse gas($CO_2$) is expected to raise average temperature of the earth with the maximum $6.4^{\circ}C$, and sea surface with 59cm in 2090. Like this, destruction of environment by greenhouse gas is regarded as universal problem threatening the existence, not only the problem of one nation. Consequently, systematic correspondence to the global warming at the aspect of energy consumption is also needed in Korea. From the analysis result of 'Statistics of Energy Consumption' published by Green Korea in 2007, energy consumption increment of domestic universities was higher as many as 3.7 times than 22.5% of the whole energy consumption increment in our country. This says to be the direct example which shows that universities are huge sources of greenhouse gas emission. New constructing and enlarging buildings of each universities within campus are the most major reason for such a large increment of energy consumption in universities. The opinion that the possibility of causing energy waste and efficiency reduction is raised by increased buildings of universities has been propounded. That is, universities should make concrete goal and the plan for reducing emission of green house gas against climatic change, and should practice. Accordingly, there is the meaning that 2 aspects of environment-friendly design characteristics, that is application of energy utilizing technology, material usage of energy efficiency-side and environment-side, and introduction of natural element in the environmental aspect, were analyzed for facilities of university campus designed in environment-friendly point of view from initial stage of plan, and direction of environment-friendly design of university facilities in the future was groped in order to grasp environment-friendly design tendency of internal and external University facilities based on this analysis of this paper.