• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.50 no.1
• /
• pp.13-26
• /
• 2024

Objectives: The aim of this study was to perform a comparative analysis of the ultrastructural and chemical composition of sialoliths, tonsilloliths, and antroliths and to describe their growth pattern. Materials and Methods: We obtained 19 specimens from 18 patients and classified the specimens into three groups: sialolith (A), tonsillolith (B), and antrolith (C). The peripheral, middle, and core regions of the specimens were examined in detail by histology, micro-computed tomography (micro-CT), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy, and transmission electron microscopy (TEM). Results: In the micro-CT, group A showed alternating radiodense and radiolucent layers, while group B had a homogeneous structure. Group C specimens revealed a compact homogeneous structure. Histopathologically, group A showed a laminated, teardrop-shaped, globular structure. Group B demonstrated degrees of immature calcification of organic and inorganic materials. In group C, the lesion was not encapsulated and showed a homogeneous lamellar bone structure. SEM revealed that group A showed distinct three layers: a peripheral multilayer zone, intermediate compact zone, and the central nidus area; groups B and C did not show these layers. The main elemental components of sialoliths were O, C, Ca, N, Cu, P, Zn, Si, Zr, F, Na, and Mg. In group B, a small amount of Fe was found in the peripheral region. Group C had a shorter component list: Ca, C, O, P, F, N, Si, Na, and Mg. TEM analysis of group A showed globular structures undergoing intra-vesicular calcification. In group B, bacteria were present in the middle layer. In the outer layer of the group C antrolith, an osteoblastic rimming was observed. Conclusion: Sialoliths had distinct three layers: a peripheral multilayer zone, an intermediate compact zone and the central nidus area, while the tonsillolith and antrolith specimens lacked distinct layers and a core.

• Journal of Animal Science and Technology
• /
• v.66 no.1
• /
• pp.135-144
• /
• 2024

The objective of this study was to investigate the influence of feeding frequency on a sow's reproductive performance and stress response during gestation. A total of twenty multiparous sows (Yorkshire × Landrace) were used in a completely randomized design based on their parity, body weight (BW), and backfat thickness (BFT), and the sows were allotted to two different feeding systems: 1) once daily feeding (OF) and 2) twice daily feeding (TF) in corn-soybean meal based diets. The gestation diet was formulated to contain 3,265 kcal of metabolizable energy (ME) / kg, 12.90% of crude protein (CP), and 0.75 % of total lysine. The lactation diet was formulated to contain 3,265 kcal of ME / kg, 16.80% of CP, and 1.08% of total lysine and provided ad libitum during lactation. In gestation, sow BFT and BF changes were not affected by feeding frequency, but higher BW and BW gain from day 35 to 90 and day 35 to 110 were observed in OF sow (p < 0.10). In lactation, feeding frequency did not influence on BW, BW gain, BFT, BF changes, average daily feed intake, and wean-to-estrus interval. Also, there were no differences in litter size, litter weight and piglet weight in lactating sows. OF sows had higher (p < 0.05; p < 0.10) protein, solid-not-fat, and total solid concentrations in colostrum compared to TF sows, while OF sows had a lower (p < 0.05) lactose concentration in colostrum compared to TF sows. Sows in OF showed significantly lower average daily water consumption (ADWC) from day 35 to 110 of gestation (p < 0.05). While there were no significant differences in stereotypic behaviors and salivary cortisol levels during gestation between treatments, the OF sows showed less time spending on the activity at day 105 (p < 0.05). In conclusion, reduced feeding frequency increased BW gain during gestation, decreased activation time, and changed the colostrum composition. This information may contribute to the understanding of the physiological and behavioral change of gestating sows by manipulating feeding frequency.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.44 no.2
• /
• pp.92-98
• /
• 2024

The objective of this study was to investigate the comparison of feeding a total mixed ration (TMR) containing imported alfalfa hay and TMR containing hot-air dried domestic alfalfa on rumination activity, milk production, and composition in lactating dairy cows. Ten Holstein dairy cows were divided into two groups: control (imported alfalfa hay + TMR) and treatment (hot-air dried domestic alfalfa + TMR) groups. The study was conducted over a total period of 18 days, including a 13-days adaptation period and a 5-days main experimental period. The results indicated no differences in total digestible nutrient and net energy intake between the imported and hot-air dried alfalfa. Body weight was not significantly different between the two groups (p>0.05), however, total feed intake and rumination time were significantly and tendentially higher in the treatment group compared with control group, respectively (p<0.001; p=0.075). Milk yield was not significantly different between the two groups (p>0.05), however, milk fat (kg) and lactose (%) concentration were significantly higher in the treatment group compared with control group (p=0.016; p=0.02). This study confirms that feeding TMR with hot-air dried domestic alfalfa results in no differences of feed intake, rumination activity, and milk productivity. Therefore, it is considered that hot-air dried domestic alfalfa can be used as a substitute for imported alfalfa on lactating dairy cows.

• Journal of Advanced Navigation Technology
• /
• v.28 no.4
• /
• pp.532-537
• /
• 2024

In this study, wear characteristics and microstructure changes due to changes in alloy composition of Ni-Cr-Mo-V and Ni-Cr-Mo low-alloy steels used in brake discs for transportation system such as aircraft and high-speed trains. As a result of the hardness test, the hardness of C-Mo-V steel was the highest at 39.4±0.9HRc, and the hardness of Ni-Cr-Mo steel was the lowest at 32.4±0.6HRc. The friction coefficient tended to decrease as the vertical load increased. At a vertical load of 1 N, the friction coefficient of Ni-Cr-Mo steel was the highest at 0.842, and at a vertical load of 5 N, Mn-Cr-V steel was the highest at 0.696. Ni-Cr-Mo showed the largest wear scar width, depth, and wear amount, with a width of 711 ㎛, a depth of 8.24 ㎛, and a wear amount of 11 mg under a vertical load of 1 N, and a width of 1,017 ㎛, a depth of 19.17 ㎛, and a wear amount of 17 mg under a vertical load of 5 N. As a result of wear mechanism analysis, ploughing, delamination, and adhesion in all specimens, with plastic deformation being more prominently observed in Ni-Cr-Mo.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.4
• /
• pp.7-18
• /
• 2024

Because of their mineral composition, tire chips have very low thermal conductivity compared with natural geomaterials, leading to the use of sand-tire rubber mixtures in thermally insulating applications. However, systematic studies evaluating factors affecting the thermal conductivity of sand-tire rubber mixtures have been very limited. Thus, this study investigated the thermal conductivity of sand-tire rubber mixtures with varying size ratios and tire chip fractions according to the degree of saturation (S). Specimens were prepared in insulated cells, and thermal needle probe tests were performed. In addition, the contact angle and solid surface free energy of sand-tire rubber mixtures were investigated. The results of this study revealed that the thermal conductivity decreased with increasing tire chip fraction but increased with increasing water content (or S). However, the trend of increasing thermal conductivity with S varied with the tire chip fraction, and the specimens with tire chip fraction > 0.4 clearly showed a delayed increase in thermal conductivity with increasing S. This reflected that hydrophobic particles (tire chip) affected the dependency of thermal conductivity on S because of the delayed formation of capillary water bridges, which served as additional thermal conduction paths with increased moisture content.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.307-319
• /
• 2009

Carbon dioxide capture and storage (CCS) technology has been regarded as one of the most possible and practical option to reduce the emission of carbon dioxide ($CO_2$) and consequently to mitigate the climate change. Korean government also have started a 10-year R&D project on $CO_2$ storage in sea-bed geological structure including gas field and deep saline aquifer since 2005. Various relevant researches are carried out to cover the initial survey of suitable geological structure storage site, monitoring of the stored $CO_2$ behavior, basic design of $CO_2$ transport and storage process and the risk assessment and management related to $CO_2$ leakage from engineered and geological processes. Leakage of $CO_2$ to the marine environment can change the chemistry of seawater including the pH and carbonate composition and also influence adversely on the diverse living organisms in ecosystems. Recently, IMO (International Maritime Organization) have developed the risk assessment and management framework for the $CO_2$ sequestration in sub-seabed geological structures (CS-SSGS) and considered the sequestration as a waste management option to mitigate greenhouse gas emissions. This framework for CS-SSGS aims to provide generic guidance to the Contracting Parties to the London Convention and Protocol, in order to characterize the risks to the marine environment from CS-SSGS on a site-specific basis and also to collect the necessary information to develop a management strategy to address uncertainties and any residual risks. The environmental risk assessment (ERA) plan for $CO_2$ storage work should include site selection and characterization, exposure assessment with probable leak scenario, risk assessment from direct and in-direct impact to the living organisms and risk management strategy. Domestic trial of the $CO_2$ capture and sequestration in to the marine geologic formation also should be accomplished through risk management with specified ERA approaches based on the IMO framework. The risk assessment procedure for $CO_2$ marine storage should contain the following components; 1) prediction of leakage probabilities with the reliable leakage scenarios from both engineered and geological part, 2) understanding on physio-chemical fate of $CO_2$ in marine environment especially for the candidate sites, 3) exposure assessment methods for various receptors in marine environments, 4) database production on the toxic effect of $CO_2$ to the ecologically and economically important species, and finally 5) development of surveillance procedures on the environmental changes with adequate monitoring techniques.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.174-175
• /
• 2012

(In, Ga) N-based III-nitride semiconductor materials have been viewed as the most promising materials for the applications of blue and green light emitting devices such as light-emitting diodes (LEDs) and laser diodes. Although the InGaN alloy can have wide range of visible wavelength by changing the In composition, it is very hard to grow high quality epilayers of In-rich InGaN because of the thermal instability as well as the large lattice and thermal mismatches. In order to avoid phase separation of InGaN, various kinds of structures of InGaN have been studied. If high-quality In-rich InGaN/GaN multiple quantum well (MQW) structures are available, it is expected to achieve highly efficient phosphor-free white LEDs. In this study, we proposed a novel InGaN double hetero-structure grown on GaN nano-pyramids to generate broad-band red-color emission with high quantum efficiency. In this work, we systematically studied the optical properties of the InGaN pyramid structures. The nano-sized hexagonal pyramid structures were grown on the n-type GaN template by metalorganic chemical vapor deposition. SiNx mask was formed on the n-type GaN template with uniformly patterned circle pattern by laser holography. GaN pyramid structures were selectively grown on the opening area of mask by lateral over-growth followed by growth of InGaN/GaN double hetero-structure. The bird's eye-view scanning electron microscope (SEM) image shows that uniform hexagonal pyramid structures are well arranged. We showed that the pyramid structures have high crystal quality and the thickness of InGaN is varied along the height of pyramids via transmission electron microscope. Because the InGaN/GaN double hetero-structure was grown on the nano-pyramid GaN and on the planar GaN, simultaneously, we investigated the comparative study of the optical properties. Photoluminescence (PL) spectra of nano-pyramid sample and planar sample measured at 10 K. Although the growth condition were exactly the same for two samples, the nano-pyramid sample have much lower energy emission centered at 615 nm, compared to 438 nm for planar sample. Moreover, nano-pyramid sample shows broad-band spectrum, which is originate from structural properties of nano-pyramid structure. To study thermal activation energy and potential fluctuation, we measured PL with changing temperature from 10 K to 300 K. We also measured PL with changing the excitation power from 48 ${\mu}W$ to 48 mW. We can discriminate the origin of the broad-band spectra from the defect-related yellow luminescence of GaN by carrying out PL excitation experiments. The nano-pyramid structure provided highly efficient broad-band red-color emission for the future applications of phosphor-free white LEDs.

• Journal of Korea Foresty Energy
• /
• v.21 no.2
• /
• pp.25-33
• /
• 2002

One of the critical problems to preserve books and documents in libraries and archives is the deterioration. Some of previous results showed that the major cause of paper deterioration was the acid-catalyzed hydrolysis of the cellulose in paper fibres and aging rate of acidic paper was faster than that of alkaline paper. Therefore, It is necessary to remove the acid in the paper for reducing the rate of paper deterioration. It has been reported to extend the useful life of acidic paper by three to five times. Recently, It has been recognized the need for an effective method of deacidifying large quantities of books and document. However, in the previous many reports little attention was paid to the effect of paper additives. In this paper, We carried out experiment about the effect of additives on paper aging and the effect of deacidification by the gaseous ethanolamines (monoehtanolamine, diethanolamine, triehtanolamine). In result, it was found that the strength of aging was in the order of the alum＋rosin＞alum ＞AKD＞ control and the rate of deacidification was in the order of the monoethanolamine＞diethanolamine＞triethanolamine. The treatment with the gaseous ethanolamines caused decreasing of brightness and dropping of fold endurances. However, deacidification by combination treatment of the various gaseous ehtnaolamines prevented from decreasing of brightness and dropping of folding endurances.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.2
• /
• pp.111-118
• /
• 1986

Sysnthesis and accumulation pattern or nonstructural carbohydrates in orchardgrass (Dactylis glomerata L.) cv. Potomac and Baraula, perennial ryegrass (Lolium perenne L.) cv. Reveille and Semperweide and meadow fescue (Festuca pratensis Huds.) cv. Cosmos 11 and N.F.G. were studied under different meteorological environments and cutting managements. The field experiments were conducted as a split plot design with three cutting regimes of 6-7 cuts at grzing stage, 4-5 cuts at silage stage and 3 cuts at hay stage in Korea and West Germany from 1975 to 1979. The results obtained are summarized as follows: 1. Accumlation of nonstructural carbohydrates in temperate grasses was influenced by grass species and regional climatic environments. Total nonstructural carbohydrates (TNC) of orchardgrass, perennial ryegrass and meadow fescue in Korea, taken as average of all cutting regimes, were shown a value of 4.39%, 6.08% and 8.01%, respectively, while those under cool summer climatic condition in West Germany accumulated to 10.42% (orchardgrass), 18.02% (perennial ryegrass) and 12.73% (meadow fescue). 2. Nonstructural carbohydrates in orchardgrass were accumulated mainly as mono-and disaccharose, while those in perennial ryegrass resreved as fructosan. The contents of fructosan and mono-and disaccharose were 1.34% and 3.04% for orchardgrass, 3.25% and 2.83% for perenninal ryegrass, respectively. Meadow fescue had a concentration of 3.93% fructosan and 4.08% mono-and disaccharose. 3. Synthesis and accumulation of nonstructural carbohydrates in temperate grasses were negative associated with increasing of air temperature (P$\leq$ 0.1%). Under hot stress during summer season in Korea, the contents of fructosan, mono-and disaccharose were decreased to about 0.34% nd 1.28% from a value of 1.34% and 2.69% in spring season. In Freising and Braunschweig, the concentration of reserved carbohydrates was less influenced by growing season. 4. Synthesis and accumulation pattern of nonstructural carbohydrates were shown a great respons to cutting frequency of the plants. Frequent cutting system under high temperature lowered the accumulation of reserved carbohydrates, especially fructosan and also caused to decrease the plant regrowth. However, under cool temperature, it shows a less differences of tructosan, mono-and disaccharose in the plants at all cutting systems.

• Journal of Mushroom
• /
• v.10 no.3
• /
• pp.136-142
• /
• 2012

This study was carried out to determine the supplemental level of spent mushroom (Flammulina velutipes) substrates as an energy source in manufacturing of high moisture sorghum whole crop silage. Whole crop sorghum was harvested at heading stage and ensiled with spent mushroom substrates of 20% (S-20), 40% (S-40) and 60% (S-60) as fresh matter basis. Each silage was manufactured in plastic buckets included vinyl bag by three replications and stored for 0, 3, 6 and 9 weeks, respectively. Fermentation characteristics and quality of sorghum silages manufactured by supplemental level of spent mushroom substrates were as follows. Moisture contents of whole crop sorghum and spent mushroom substrates were 83.85% and 54.3%, respectively, and that of silages was 78% for S-20, 71% for S-40 and 68% for S-60. Ether extracts content of silages was significantly (P<0.05) increased during the fermentation periods. The pH in silages fermented for 3 weeks and above ranged from 4.24 to 4.42, and the decrease of pH by fermentation was relatively greater in S-40 compare to the other treatments. The lactic acid content of silage inclined that the S-40 was higher compared to the other treatments and decreased with elongation of fermentation period of silage. The contents of acetic acid and propionic acid of silages were not influenced by treatments and fermentation period. Flieg's score for estimation of silage quality ranged from 60 to 83, and was relatively high quality in the S-40 fermented for 9 week, and was relatively low quality in the S-60 fermented for 9 week. From above results, we suggest that 40% supplementation of spent Flammulina velutipes mushroom substrates as an energy source is resonable level in manufacturing of high moisture sorghum whole crop silage.