• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.2
• /
• pp.119-126
• /
• 2002

Recently, the flux community in Korea established a new regional flux network, so-called KoFlux, which will provide an infrastructure for collecting, synthesizing, and analysing long-term measurements of energy and mass exchange between the atmosphere and the various vegetated surfaces. KoFlux requires the collection of long time series of raw data, and a large amount of data are expected to accumulate due to continuous flux observations at each KoFlux sites. Therefore, we need a systematic and efficient tool to manage these raw data. As a part of this effort, a computer program far processing raw data measured from micrometeorological field experiments was developed for the flux community in Korea. In this paper, we introduce this program for processing raw data to estimate fluxes and other turbulent statistics and explain the micrometeolological processes coded in this data-processing program. Also, we show some examples on how to run the program and handle the outputs for the unique purpose of research interest.

• Tunnel and Underground Space
• /
• v.26 no.4
• /
• pp.253-265
• /
• 2016

In this study, travel time data collection of mine equipments was conducted in an underground mine using a reverse Radio Frequency IDentification (RFID) system. In the reverse RFID system, RFID readers and antennas are mounted on mine equipments, and RFID tags are attached to the underground mine gallery. Indoor experiments were performed to analyze how RFID reader transmission power levels affect tag readable area and tag recognition rates. The results showed that travel time measurement become precise when the reader transmission power was reduced, however tag recognition rates were reduced. The field experiments indicated that setting the reader transmission power to 28 dBm maintained the tag recognition rate while minimizing the tracking location error. In addition, the results revealed that the reverse RFID system can be used successfully in an underground mine to collect the travel time data of haulage trucks.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.43-52
• /
• 2007

Offset printing is one of the well known printing technique of lithographic process and consists of image area and 'non-image area on a flat image carrier. The surface tension of dampening water can be controlled by adding IPA after mixing of raw water and etching solution. The etching solution contains a surfactant for reducing surface energy, a clean agent for non-imaging area, wetting agent for protecting non-imaging area from oil components like ink and also an emulsifying agent for controlling emulsification. In this study, the present situation of dampening water maintenance has examined by collecting dampening water using at domestic companies. The pH related to dampening water, conductivity, contact angle, emulsification curve are measured to define the current situation of dampening water control of each companies and to analyze the relationship among measured properties. In the study most of companies among 16 printing companies tested controlling dampening water through pH value. However, the quality of printing has varied depending upon conductivity, contact angle, IPA content, and emulsification value. The control of dampening water should be carry at the state of the standard when adding proper ratio of etching solution. It would be more effective when pH or conductivity control carries out in parallel with controlling dampening water. Therefore the concept that pH5.5 is correct is based concept. Based on these initial tests it is defined that the standardization of dampening water control is required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5452-5459
• /
• 2014

A resonance linear electric generator in a vehicle suspension is a system that performs self-electric generation by collecting the vibration energy when a vehicle runs on a road, and takes the resonance phenomenon to derive large electric generation from slight road surface vibrations. In this paper, the motions of an armature in three different electric generator structures were simulated and the actual generation quantity was calculated and compared with these results. Furthermore, when the vehicle runs on the road, the design improvement for a multi-degree of freedom electric generator was conducted to make the resonance respond to various excitation frequencies, and the change in the resonance points and generation quantity were identified.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2135-2140
• /
• 2015

In this paper, proposed a new lighting control system which can reduce power consumption compared to conventional street lamps and intelligently control the light efficiently depending on whether there is a vehicle on the street. The new lighting control system proposed by this paper detects the presence of cars by collecting and analyzing sounds generated by the movement of cars. Then, the system controls lighting of street lamps based on the above car detection information, and turns on the street lamps sequentially by transmitting the car detection information. Experimental results showed that lightings were controlled based on the presence of cars and that operations of the lamps were made by turning on the lights sequentially by determining the moving direction of cars. This system is considered a technology that can reduce energies by applying to local roads with a few cars moving or national highways where lights are always turned on with low energy efficiency.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.2
• /
• pp.110-115
• /
• 2011

The effect of $TiO_2$ nanotube (TNT) and nanoparticle (TNP) composite photoelectrode and the role of TNT to enhance the photo conversion efficiency in dye-sensitized solar cell (DSSC) have investigated in this study. Results demonstrated that the increase of the TNT content (1-15 %) into the electron collecting TNP film increases the open-circuit potential ($V_{oc}$) and short circuit current density ($J_{sc}$). Based on the impedance analysis, the increased $V_{oc}$ was attributed to the suppressed recombination between electrode and electrolyte or dye. Photochemical analysis revealed that the increased Jsc with the increased TNT content was due to the scattering effect and the reduced electron diffusion path of TNT. The highest $J_{sc}$ (12.6 mA/$cm^2$), Voc (711 mV) and conversion efficiency (5.9%) were obtained in the composite photoelectrode with 15% TNT. However, $J_{sc}$ and $V_{oc}$ was decreased for the case of 20% TNT, which results from the significant reduction of adsorbed dye amount and the poor attachment of the film on the fluorine-doped tin oxide (FTO). Therefore, application of this composite photoelectrode is expected to be a promising approach to improve the energy conversion efficiency of DSSC.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.4
• /
• pp.101-110
• /
• 2011

A smart grid networks delivers electricity from suppliers to consumers using digital technology with two-way communications to control appliances at consumers' homes to save energy, reduce cost and increase reliability and transparency. Security is critically important for smart grid networks that are usually used for the electric power network and IT environments that are opened to attacks, such as, eavesdroping, replay attacks of abnormal messages, forgery of the messages to name a few. ZigBee has emerged as a strong contender for smart grid networks. ZigBee is used for low data rate and low power wireless network applications. To deploy smart grid networks, the collected information requires protection from an adversary over the network in many cases. The security mechanism should be provided for collecting the information over the network. However, the ZigBee protocol has some security weaknesses. In this paper, these weaknesses are discussed and a method to improve security aspect of the ZigBee protocol is presented along with a comparison of the message complexity of the proposed security protocol with that of the current ZigBee protocol.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.4
• /
• pp.341-351
• /
• 2008

Communication in wireless sensor networks comprising a plurality of sensor nodes located in an ad hoc environment is unidirectional in that data gathered by sensor nodes are transmitted to a sink node and not vice versa. In those networks, it is not possible for a server or a gateway to send commands to the sensor nodes to determine whether some previously received data are valid when the data indicate unusual conditions, which makes it difficult to make appropriate reactions to the unusual situations. This paper proposes and implements a TDMA-based sensor network communication protocol named BiWSLP(Bidirectional Wireless Sensor Line Protocol) supporting bidirectional communication capability. The BiWSLP is an extension of the WSLP, a unidirectional sensor network communication protocol based on the TDMA protocol. To test the feasibility of the proposed BiWSLP, we construct a virtual bridge management system capable of sending commands to sensor nodes as well as collecting data from the sensor nodes. Based on the test results of the virtual bridge management system, we show the applicability and advantages of the BiWSLP in terms of energy efficiency and bidirectional communication capability.

• The Journal of the Korea Contents Association
• /
• v.7 no.11
• /
• pp.111-119
• /
• 2007

Sensor networks are needed for special purposes such as collecting or transmitting information by using sensor devices, for which various routing protocols have been proposed. Among existing protocols, the modified PEGASIS routing technique is known to be effective when applied to cases with directional transmissions of data. However it does not consider recovery from errors or guaranteeing stability in data transmission, while sensor devices performing repetitive relays and controls are prone to errors. In this paper, a double relay routing protocol for Zigbee based sensor networks where data are transfered reliably with a linear direction. The proposed protocol is effective in the sense that it secures the relaible transmission of data with minimal energy consumption based on a directional data transfer. A streetlight control system has been presented as an application of the proposed protocol.

• Clean Technology
• /
• v.17 no.4
• /
• pp.353-362
• /
• 2011

In our nature, the utilization of rainwater is essential for healthy water recirculation. This is one of the solutions of the increment of impermeability surface according to the development of new cities; this study of the improvement of rainwater quality has been carried on through the improvement of collecting and restoring system of rainwater. The southwestern region of Daejeon City, the rainwater coefficient of run off was 0.40 and this number had computed to 0.59 after the development. After filtration of rainwater, the heavy metal (Cu, As, Cr, Fe, Mn) contents level were lower than underground water. Moreover, collected rainwater showed better quality than underground water in following criteria; hardness, permanganate consumption quality, chloride, evaporation residue, sulfates and nitrate nitrogen. This water quality met the gray water quality standards. The rainwater quality was still suitable to use as bathroom flushing and gardening after 100 days of storage. This study proved that modification (installation of cover with gutter to existing rainwater collection system, proper filtering, and installation of underground storage tank) of collection system could improve quality of water and maintain this approximately 100 days.