• Journal of Climate Change Research
• /
• v.7 no.4
• /
• pp.477-484
• /
• 2016

In general, $CH_4$ concentrations generated in combustion facilities are known to be ppm units. In most cases, $CH_4$ samples are collected in Tedlar bags and transported to laboratories for analysis. Considering this fact, in the present study, an attempt was made to find out how long samples can be stored in cases where they are kept in bags and transported as a preliminary study for sampling. According to the results of the experiment using simulated gases (1 ppm, 5 ppm, 10 ppm) in Tedlar bag, $CH_4$ was safe up to 240 hr which is the full time. In the case of simulated gases are containing 4 kind gases ($N_2$, $CO_2$, $CH_4$, and $N_2O$). Field samples (samples of obtained by collecting combustion facilities' exhaust gases) are known to contain highly reactive substances (for example NOx, SOx, and VOCs) and may affect each other. In the present study, one site sample was secured from each of a bituminous coal combustion facility and an LNG combustion facility and whether the concentrations of $CH_4$ gas would change over time (24 hr, 96 hr, 144 hr, 192 hr) was checked. Since site samples could not be analyzed on the day of collection, an experiment was started 24 hr after the time point of sampling to analyze the samples. As with the results of analysis of the simulated gas (240 hr), the results of analysis using the site sample indicated that it could be stored for the full study period 192 hr. Therefore, it was judged that if 192 hr would be taken after sampling before the sample would be analyzed, the concentration value should be reliable.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.747-754
• /
• 2023

Energy-efficient routing protocol is an important task in a wireless sensor network that is used for monitoring and control by wirelessly collecting information obtained from sensor nodes deployed in various environments. Various routing techniques have been studied for this, but it is also necessary to consider WSN environments with specific situations and conditions. In particular, due to topographical characteristics or specific obstacles, a hole where sensor nodes are not deployed may exist in most WSN environments, which may result in inefficient routing or routing failures. In this case, the geographical routing-based hall bypass routing method using GPS functions will form the most efficient path, but sensors with GPS functions have the disadvantage of being expensive and consuming energy. Therefore, we would like to find the boundary node of the hole in a WSN environment with holes through minimal sensor function and propose hole bypass routing through boundary line formation.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.1
• /
• pp.92-96
• /
• 2024

The application of the technology for forming Al₂O₃ thin films using ALD(atomic layer deposition) method is rapidly increasing in the semiconductor and display fields. In order to increase the efficiency of the ALD process in a mass production line, metallic by-products generated from the ALD process chamber must be effectively collected. By collecting by-products flowing out of the chamber with a cold trap device before they go to the vacuum pump, damage to the vacuum pump can be prevented and the work room can be maintained stably, resulting in increased process flow rate. In this study, a cold trap was installed between the ALD process chamber and the dry pump to measure and analyze by-products generated during the Al₂O₃ thin film deposition process. As a result, it was confirmed that Al and O elements were discharged, and the collection forms were two types: bulk and powder. And the binding energy peaked at 73.7 ~ 74.3 eV, the binding energy of Al 2p, and 530.7 eV, the binding energy of O 1s, indicating that the binding structure was Al-O.

• Smart Media Journal
• /
• v.13 no.7
• /
• pp.9-17
• /
• 2024

Due to the increase in energy consumption, and eco-friendly policies, there is a need for efficient energy consumption in buildings. Anomaly power detection based on deep learning are being used. Because of the difficulty in collecting anomaly data, anomaly detection is performed using reconstruction error with a Recurrent Neural Network(RNN) based autoencoder. However, there are some limitations such as the long time required to fully learn temporal features and its sensitivity to noise in the train data. To overcome these limitations, this paper proposes the TCN-USAD, combined with Temporal Convolution Network(TCN) and UnSupervised Anomaly Detection for multivariate data(USAD). The proposed model using TCN-based autoencoder and the USAD structure, which uses two decoders and adversarial training, to quickly learn temporal features and enable robust anomaly detection. To validate the performance of TCN-USAD, comparative experiments were performed using two building energy datasets. The results showed that the TCN-based autoencoder can perform faster and better reconstruction than RNN-based autoencoder. Furthermore, TCN-USAD achieved 20% improved F1-Score over other anomaly detection models, demonstrating excellent anomaly detection performance.

• Journal of the Korean Society of Food Culture
• /
• v.9 no.5
• /
• pp.447-455
• /
• 1995

The purpose of the present study is to assess nutrient content for providing nutrition information such as nutrition labeling on Korean dishes in restaurant and food service institutions. The content of nutrients was calculated in recipies used to prepare dishes which has been frequently consumed in such four groups as the literature, foodservice institutions of industries, restaurants, and households. The numbers of dishes surveyed were 15. Total numbers of literture used for recipies analysis are 20. Recipies used in foodservice institutions of industries were abstracted from the journal 'Guk-Min Young-Yang' published in Korea dietetic association and obtained with the help of dietitians working in those institutions. Also, recipies has been using in restaurants were given from the Korea restaurant association. Recipies in households was calculated from the secondary analysis of the Korean National Nutrition Survey. Nutrient content from foods except steamed rice and side dishes in each dish was calculated using data of Korean food composition table published. The content of energy and protein in 'Gal-bi tang' (beef-rib soup) were highest in recipes used at restaurants, vitamin C in recipes of food service institutions of industries due to the generous use of meats and vegetables than other recipies. 'Doen-jang chigae' (soybean paste stew) showed the lowest content of energy in results analyzing recipes presented on the literature and varied protein level by four groups for difference of protein source used. The content of energy in 'Gop-chang jeongol' (small intestines stew) is 150 kcal more than 'Soegogi jeongol' (beef stew) in general. The energy level of 'Daeji-galbi' jim (braised pork ribs) and 'Dak jim' (braised chicken) turned out to be the highest in recipies presented on literature. Variation of each nutrient content including energy and protein was relatively high, since some of foods used in 'Pibimbab' (mixed rice) varied with four groups. Amounts of energy and protein in 'Naeng-myeun' (cold noodles) is the highest in recipies of foodservice institution of industries because much amounts of noodle and meats were used comparing to other groups. The average content of energy in 'Pulgogi' (grilled meat with sauce) was 50% to Korea recommended amounts of one meal, 833.3 kcal. Content of vitamin $B_1$ in 'Jeuk pyeunuk' (boiled pork), which is made of pork meat, was higher than other dishes. The ingredients of frequently consumed Korean dishes were highly variable among the four groups which inevitably results in variation of nutrient content in each dishes. The high variation of nutrient content in each dish according to study requires careful collecting of the large number of recipies in presenting representative nutrient content for nutrition labeling on dishes in restaurant and food service institutions effectively.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.93-101
• /
• 2010

As the number of indispensable needs of clean energy increases due to the green new deal revolution, the possibility of heat energy harvesting from the surrounding infrastructures such as a railroad or highway was verified. In order to find more efficient usage of a heat source, the possibility of transforming heat into electricity were confirmed using Bi-Te type thermoelectric element, and electrical quality were tested with experiments of different heat source and environmental change in the surrounding infrastructures. After careful experiments, the possibility of collecting thermal energy and findings of the heat temperature change in infrastructrue are verified with a result of obtaining almost 20.82W in 70 celcius($^{\circ}C$) temperature differences and $1m^2$ surface area. Consequently, the ratio of heat temperatiure change and transforming surface area is the most crucial factor in the harvesting heat energy, and reducing thermal loss and improving thermal convection as well as transformation efficiency of thermoelectric element is required to get more efficient and durable generation.

• World Technopolis Review
• /
• v.3 no.2
• /
• pp.89-96
• /
• 2014

Center for Research of Science and Technology ("PUSPIPTEK") has 460 hectares land area, still maintained as a green area with more than 30% green space. There are 47 centers for research and testing technology, technology-based industries, and as well as public supporting facilities in PUSPIPTEK area. Based on the concepts developed to make this area as an ecological region, PUSPIPTEK can be seen as a model of eco-innovation. The purpose of this research is to develop a model of water, energy and waste management with eco-innovation concept. As a new approach in addressing environmental degradation and maintaining the sustainability of ecosystem, studies related to eco-innovation policy that combines the management of water, energy and waste in the region has not been done. In order to achieve the objectives of the research, a series of techniques for collecting data on PUSPIPTEK existing conditions will be carried out, which includes utilities data (water, electricity, sewage) and master plan of this area. The savings over the implementation of the concept of eco-innovation in water, energy, and waste management were calculated and analyzed using quatitative methods. The amount of cost savings and feasibility were then calculated. Eco innovation in water management among other innovations include the provision of alternative sources of water, overflow of rain water and water environments utilization, and use of gravity to replace the pumping function. Eco-innovation in energy management innovations include the use of LED and solar cell for air conditioning. Eco-innovation in waste management includes methods of composting for organic waste management. The research results: (1) The savings that can be achieved with the implementation of eco innovation in the water management is Rp. 3,032,640 daily, or Rp.1,106,913,600 annually; (2) The savings derived from the implementation of eco innovation through replacement of central AC to AC LiBr Solar Powered will be saved Rp.1,933,992,990 annually and the use of LED lights in the Public street lighting PUSPIPTEK saved Rp.163,454,433 annually; (3) Application of eco innovation in waste management will be able to raise awareness of the environment by sorting organic, inorganic and plastic waste. Composting and plastic waste obtained from the sale revenue of Rp. 44,016,000 per year; (4) Overall, implementation of the eco-innovation system in PUSPIPTEK area can saves Rp. 3,248,377,023 per year, compared to the existing system; and (5)The savings are obtained with implementation of eco-innovation is considered as income. Analysis of the feasibility of the implementation of eco-innovation in water, energy, and waste management in PUSPIPTEK give NPV at a 15% discount factor in Rp. 3,895,228,761; 23.20% of IRR and 4.48 years of PBP. Thus the model of eco-innovation in the area PUSPIPTEK is feasible to implement.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.64.2-64.2
• /
• 2010

The objective of this study is to make a comparative study of the operation performance of different type of solar collectors. A flat-plate collector, a single-glazed evacuated collector and a double-glazed evacuated collector are used in this study. These 3 type of collectors are connected in series in the order of a flat-plate collector, a single-glazed evacuated collector and a double-glazed evacuated collector. This experimental facility is a kind of a solar system with a controller, a heat exchanger, a storage tank and a circulation pump. Each collector has a different collection area(flat-plate collector-$6.00m^2$ total area/$5.61m^2$ aperture area, double-glazed evacuated collector-$6.04m^2$ total area/$4.92m^2$ aperture area, single-glazed evacuated collector-$7.65m^2$ total area/$5.61m^2$ aperture area) and its performance characteristic respectively. The experiments have been demonstrated at around $70^{\circ}C$ operating temperature(flat-plate collector inlet temperature). The thermal collecting efficiencies of each collector are obtained under the different insolation and operation condition as a result.

• Journal of Korean Academy of Nursing
• /
• v.28 no.2
• /
• pp.414-430
• /
• 1998

The main purpose of this study was to provide understanding of the meaning of post menopausal womens' lived body changing experience. The methodological approach was guided by Van Manen's hermeneutic phenomenological methodology : inquiring and investigating experience as it was lived rather than as conceptualized : reflecting and analyzing the essential themes which characterize the phenomenon : and describing the phenomenon through the art of writing and rewriting. Multiple strategies for data collecting were used ; in depth face-to-face interview ; analysis of womens' writings : artistic work : and analysis of examples of phenomenon in art, literature, and drama. Although the experience was different for all of the women interviewed, essential themes of experience emerged ; Drifting through the years (solitude, in the twilight of life, loneliness, change of taste, forgetfulness, the sense of missing something), A walking weather forecast, Standing on the threshold of losing ki energy, Lately taking care of my body, Seized with fear all of a sudden, Keenly feeling the preciousness of life, Preferring comfortableness to prettiness, Wanting to recall my past years, A strong impulse to rechallenge life, Becoming more fond of friends. Findings from the artistic and creative inquiry further validated the interview findings and the meaning discovered. The study illuminated meaning and simultaneously validated the phenomenological research process. Essential themes for understanding women's experience, implications for education, research, and practice, direction and need for continuing inquiry were identified.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.81-82
• /
• 2015

BIM has been a reliable construction project management tool to handle various kinds of construction information generated in the facility life cycle. To take these advantages, researchers have been promoted numerous studies in a residential, a commercial, and an educational facilities with a large number of on-going projects. However, despite running as the role of essential energy supplier, power plant related BIM research is relatively insufficient than others. In particular, due to the extending of the facility service period and the requirement of the complicated construction project management for 'overhaul' and 'repowering' in the power plant maintenance phase, the needs for using BIM have been increased gradually. For using BIM based maintenance, it is needed to consider an information collecting methods and necessary to develop an appropriate breakdown structure to share information. Therefore, 'EBS' is produced by reviewing the previous research related to BIM and analyzing the repair activities in the maintenance phase. Proposed 'EBS' must be useful not only a judgment between capital expenditure versus revenue expenditure but also appropriate maintenance strategies development for property management.