• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.588-593
• /
• 2022

Terephthalaldehyde (TPA) is introduced as a cross liker to enhance electron transfer of hemin-based cathodic catalyst consisting of polyethyleneimine (PEI), carbon nanotube (CNT) for hydrogen peroxide reduction reaction (HPRR). In the cyclic voltammetry (CV) test with 10 mM H₂O₂ in phosphate buffer solution (pH 7.4), the current density for HPRR of the suggested catalyst (CNT/PEI/hemin/PEI/TPA) shows 0.2813 mA cm^-2 (at 0.2 V vs. Ag/AgCl), which is 2.43 and 1.87 times of non-cross-linked (CNT/PEI/hemin/PEI) and conventional cross liker (glutaraldehyde, GA) used catalyst (CNT/PEI/hemin/PEI/GA), respectively. In the case of onset potential for HPRR, that of CNT/PEI/hemin/PEI/TPA is observed at 0.544 V, while those of CNT/PEI/hemin/PEI and CNT/PEI/hemin/PEI/GA are 0.511 and 0.471 V, respectively. These results indicate that TPA plays a role in facilitating electron transfer between the electrodes and substrates due to the π-conjugated cross-linking bonds, whereas conventional GA cross-linker increases the overpotential by interrupting electron and mass transfer. Electrochemical impedance spectroscopy (EIS) results also display the same tendency. The charge transfer resistance (R_ct) of CNT/PEI/hemin/PEI/TPA decreases about 6.2% from that of CNT/PEI/hemin/PEI, while CNT/PEI/hemin/PEI/GA shows the highest R_ct. The polarization curve using each catalyst also supports the superiority of TPA cross liker. The maximum power density of CNT/PEI/hemin/PEI/TPA (36.34±1.41 μWcm^-2) is significantly higher than those of CNT/PEI/hemin/PEI (27.87±0.95 μWcm^-2) and CNT/PEI/hemin/PEI/GA (25.57±1.32 μWcm^-2), demonstrating again that the cathode using TPA has the best performance in HPRR.

• The Korean Journal of Pesticide Science
• /
• v.2 no.3
• /
• pp.64-69
• /
• 1998

New thirty derivatives of 5,6-dihydro-2-trifluoromethyl-1,4-oxathiin carboxanilide as substrate(S) were synthesized and their fungicidal activities in vivo against rice sheath blight(Rhizoctonia solani) and wheat leaf rust(Puccinia recondita) were examined. The structure activity relationships(SAR) between the activities($pI_{50}$) and a physicochemical parameters of substituents(X) at the phenylcarbamoyl group were analyzed using the adaptive regression analysis method. The 3-methoxy, 11, 3-isopropyloxy, 13 and 3-isopropyl substituent, 25 as X on the phenylcarbamoyl group exhibited the most highest fungicidal activity against the two fungi. The fungicidal potency of the (S) against Puccinia recondita was higher than Rhizoctonia solani. In case of Rhizoctonia solani, the molecular hydrophobicity(${\pi}>0$) and resonance effect(R<0) by meta-alkyl substitutents with electron donating were important factors in determining fungicidal activity. And the HOMO energy(HOMO>0), ABSQ, sum of absolute values of the atomic charges on each atom and specific polarizability(Sp.Pol<0) of (S) were significantly influential towards fungicidal activity against Puccinia recondita.. The interaction between (S) and receptor agonist from the based on SAR studies proceeds through charge-control reaction, and conditions to show higher activity has been also discussed.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.4
• /
• pp.446-452
• /
• 2003

Some new nanohybrid materials have been synthesized by intercalating the oxotitanium(IV) meso-tetrakis(4- sulfonatophenyl) porphyrin$(O=Ti^{(IV)} TSPP)$ into the Zn/Al layered double hydroxides (LDHs), and their structures and photophysical properties have been investigated by various laser spectroscopic techniques. According to the XRD pattern of the synthesized nanohybrid materials, the macrocycle plane of $O=Ti^{(IV)}$ TSPP are grafted perpendicular to the LDH layers. The $O=Ti^{(IV)}$ TSPP-intercalated LDH exhibits band broadening of the absorption spectrum and a blue shift of Q-band as compared to that observed in solution. Resonance Raman spectral measurements demonstrate that the positively charged LDHs give rise to a slight decrease of the electronic density of the porphyrin ring accompanying a small change of the electronic distribution of the $O=Ti^{(IV)}$ TSPP. Consequently the LDH environment affects the energies of the two highest occupied molecular orbitals (HOMOs) of the $O=Ti^{(IV)}$) TSPP, $a_{1u}$ and $a_{2u}$, producing a mixed orbital character. Being consistent with these electronic structural changes of $O=Ti^{(IV)}$ TSPP in LDH, both the fluorescence spectral change and the fsdiffuse reflectance transient measurements imply that the photoexcitation of the $O=Ti^{(IV)}$ TSPP intercalated into LDH undergoes fast relaxation to the O=Ti(IV) $TSPP^+-LDH^- $charge transfer (CT) state within a few picoseconds, followed by a photoinduced electron transfer between the O=Ti(IV) TSPP and LDHs with a rate constant greater than %1×10^{10}S^{-1}$. No evidence is found for back electron transfer. In conclusion, the $O=Ti^{(IV)}$ TSPP intercalated LDH seems to be a possible candidate for an artificial reaction center for an efficient solar energy conversion system.

• Journal of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.380-392
• /
• 1980

Six coordinate low spin iron(Ⅱ) complexes of vicinal-dioximes, [Fe$(DH)_2B_2$] and [Fe$(DH)_2$B(CO)]($(DH)_2$=$(CHDH)_2$(bis(1,2-cyclohexadinedioximato) bivalent anion), $(DPGH)_2$-(bis(diphenylglyoximato) bivalent anion), $(F{\alpha}DH)_2(bis(furil-{\alpha}-dioximato)$ bivalent anion); B = monodentate neutral nitrogen base), have been prepared and their physical properties have been investigated with respect to the effects of the equatorial ligands, $(DH)_2$. The order of ${\pi}$-acceptor CO stretching frequency for [Fe$(DH)_2$B(CO)] is $(F{\alpha}DH)_2$ > $(DPGH)_2$> $(CHDH)_2$, while non-${\pi}$-acceptor $NH_3$ stretching frequencies for [Fe$(DH)_2(NH_3)_2$] show the opposite order to that of CO, i.e., $(CHDH)_2$ > $(DPGH)_2$ > $(F{\alpha}DH)_2$. These infrared spectral data together with Fe-N (oxime) and Fe-N (oxime) and Fe-N (B) stretching frequency data suggest that the nitrogen atoms of $(CHDH)_2$ are more basic and poorer ${\pi}$-acceptors than the corresponding nitrogen atoms of $(DPGH)_2$ and $(F{\alpha}DH)_2$, respectively. It has been found from the electronic spectral data of [Fe$(DH)_2$] and [Fe$(DH)_2$B(CO)] that the energy of the charge transfer band from iron(Ⅱ) to $(DH)_2$ increases as the basicity of $(DH)_2$ increases.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.2
• /
• pp.1-18
• /
• 2016

Baekdudaegan Mountain System (BDMS) is a unique and traditional concept in Korea that puts importance on the connectivity of energy when Korean people recognize their mountain system. Two main national organizations that are in charge of managing natural environment in Korea, Korea Forest Service (KFS) and Ministry of Environment (MoE), have been independently investigating the natural resources in protected areas of BDMS. Each organization released its first survey report for the whole protected areas in 2011. In order to provide better understanding of BDMS's natural environment, the results contained in the first reports of KFS and MoE were compared. It was found that KFS contains a wider variety of survey items, though many of the items are overlapped between the reports of KFS and MoE. It was noticeable that the survey results of KFS and MoE were not always matched even for the same or similar items in the identical target areas. The main causes of the different survey results are suggested to be the differences of the details of the survey conditions between KFS and MoE, such as the season of the surveys and the subjectivity of surveyors, and the type of literatures included in the indoor survey. As a result, it is difficult to directly compare the survey results of KFS and MoE, which leads to low usability of the data and low efficiency of the survey processes. Therefore, it is strongly recommended that the sections and methodologies of survey should be clearly set with consideration for the research purposes. The survey data and geographical information should be digitalized and opened to the public for better accessibility to BDMS information. Also, the survey reports should include English summary, thereby the results can be utilized globally for scientific, cultural and political purposes, such as designation of a heritage site.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.23-23
• /
• 2009

GaN-based nitride semiconductors have attracted considerable attention in high-brightness light-emitting-diodes (LEDs) and laser diodes (LDs) covering from green to ultraviolet spectral range. LED and LD heterostructures are usually grown on (0001)-$Al_2O_3$. The large lattice mismatch between $Al_2O_3$ substrates and the GaN layers leads to a high density of defects(dislocations and stacking faults). Moreover, Ga and N atoms are arranged along the polar [0001] crystallographic direction, which leads to spontaneous polarization. In addition, in the InGaN/GaN MQWs heterostructures, stress applied along the same axis can also give rise to piezoelectric polarization. The total polarization, which is the sum of spontaneous and piezoelectric polarizations, is aligned along the [0001] direction of the wurtzite heterostructures. The change in the total polarization across the heterolayers results in high interface charge densities and spatial separation of the electron and hole wave functions, redshifting the photoluminescence peak and decreasing the peak intensity. The effect of polarization charges in the GaN-based heterostructures can be eliminated by growing along the non-polar [$11\bar{2}0$] (a-axis) or [$1\bar{1}00$] (m-axis) orientation instead of thecommonly used polar [0001] (c-axis). For non-polar GaN growth on non-polar substrates, the GaN films have high density of planar defects (basal stacking fault BSFs, prismatic stacking fault PSFs), because the SFs are formed on the basal plane (c-plane) due to their low formation energy. A significant reduction in defect density was recently achieved by applying blocking layer such as SiN, AlN, and AlGaN in non-polar GaN. In this work, we were performed systematic studies of the defects in the nonpolar GaN by conventional and high-resolution transmission electron microscopy.

• KSBB Journal
• /
• v.8 no.5
• /
• pp.431-437
• /
• 1993

Active carbon which has the smallest bulk and wet density was found as the best support media among 4 different kinds of materials(celite, natural zeolite, Pusuk stone, active carbon) to make a proper fluidized-bed with small energy consumption. Its minimum and optimum fluidization velocity were found as 0.03cm/sec and 0.25cm/sec, respectively. As organic loading rate for methane fermentation was increased, CODcr removal efficiencies of all the media were decreased. But, CODcr, removal efficiencies of active carbon was maintained more than 90% in this experimental range of the organic loading rate. Larger amount of microorganism was adsorbed on the active carbon which has very high specific surface area. At the organic loading rate of 16g CODcr,/l day, its adsorbed cell mass was 157mg/g. Comparing natural zeolite with roast celite, adsorbed cell mass did not increase in proportion to specific surface area of the media. Even though roast celite has the same specific surface area as the Pusuk stone, its organic removal ability was superior to that of the Pusuk stone, which explains that the relatively great surface roughness and the positive surface charge are important for cell adsorption. It was concluded that the support media for anaerobic fluidized reactor should have small wet density and small fuidization velocity, if possible, in order to increase cell adsorption by reducing the fluid shear stress.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.2
• /
• pp.61-71
• /
• 2014

A river fishway is a hydraulic structure enabling fish to overcome stream obstructions such as dams and weirs. The main aim of this paper is to investigate the collectibility of upstream-migrating fishes and hydraulic problems in pool-and-weir type fishway which has been established for upstream-migration at Namgang weir in the downstream of Namgang dam, and to grope for improvement measures which pool-and-weir type fishway can be switched to pool-and-partial weir type fishway through hydraulic field experiment. Exsisting fishway had problems which upstream-migrating fishes can not take a rest due to the seiche and vortex phenomena in pools and migrate to upstream because of height difference in entrance pool. In order to prevent hydraulically the seiche and vortex phenomena and establish rest area for fishes in each pool, we carried out hydraulic field experiments. In the fishway, it was to improve pool-and-weir into pool-and-partil weir, to decrease the height difference in entrance pool, and to reduce oriffice velocity of each pool. Also, we investigated fishes collectibility of after improving fishway for 6 days in September 2013. To resolve chronic problems(seiche-vortex phenomena and rest area for fishes), as weirs were remodeled into partial weir only which central part of weirs was part of non-overflow weir, we confirmed results that pool-and-weir type fishway could be switched to efficient pool-and-partial weir type fishway with relatively simple construction and low cost. Type-B which has the closed oriffices and the parts of non-overflow has the ideal conditions, but this conditions are limited to fishway of Namgang weir used in this study. Representative Ice-habor type fishway is pool-and-partial weir type fishway which has together parts of overflow and oriffices, and has excellent ability of upstream-migration. To switch from pool-and-weir type fishway to pool-and-partial weir type fishway, the size of oriffice has to be regulated by the discharge of fishway and the dimension on parts of non-overflow and overflow in weirs. Entrance pool is important facility which upstream-migrating fishes have to not only be collect but also charge with energy. In this study, entrance-pool is temporary and roughly-built, but fishes gather together more than the case of no entrance-pool. In the case of fishway which was protruded to downstream, as entrance of fishway turns toward or parallels to weir, the collectibility of fishway was excellent by attraction water.

• Journal of the Korean Vacuum Society
• /
• v.14 no.1
• /
• pp.17-23
• /
• 2005

Glow discharge mass spectrometry(GDMS) was used to determine the impurity concentrations of the deposited Cu films and the 6N Cu target. Cu films were deposited on Si (100) substrates at zero substrate bias voltage and a substrate bias voltage of -50 V using a non-mass separated ion beam deposition method. Since do GDMS has a little difficulty to apply to thin films because of the accompanying non-conducting substrate, we have used an aluminum foil to cover the edge of the Cu film in order to make an electrical contact of the Cu film deposited on the non-conducting substrate. As a result, the Cu film deposited at the substrate bias voltage of -50 V showed lower impurity contents than the Cu film deposited without the substrate bias voltage although both the Cu films were contaminated during the deposition. It was found that the concentration change of each impurity in the Cu films by applying the negative substrate bias voltage is related to the difference in their ionization potentials. The purification effect by applying the negative substrate bias voltage might result from the following reasons: 1) Penning ionization and an ionization mechanism proposed in the present study, 2) difference in the kinetic energy of accelerated Cu+ ions toward the substrate with/without the negative substrate bias voltage.

• Journal of the Korean Institute of Gas
• /
• v.15 no.5
• /
• pp.25-30
• /
• 2011

Biogas obtained from the biodegradable organic wastes in an anaerobic digester consists of $CH_4$ and inert gases such as $CO_2$ and $N_2$. Since the composition of biogas varies by anaerobic digester conditions and the origin of wastes, it is necessary to respond to these variations so as to make stable combustion and accomplish high efficiency when it is used as a fuel for power generating SI engines. In this study, efforts have been made to investigate the effect of changes in the calorific values of biogas on the engine performance and exhaust characteristics. The biogas was simulated by supplying of $CH_4$ with $N_2$ dilution of various ratios, and ECM was developed to achieve accurate control of ignition and combustion. The results show that as the $CH_4$ concentration of the biogas decreases, the optimal spark timing is advanced due to the elevated thermal capacity and lowered $O_2$ concentration of the in-cylinder charge. Furthermore, since combustion temperature was reduced by increased inert gas, $NO_x$ emissions decreased, whereas THC emissions increased.