• The KIPS Transactions:PartC
• /
• v.18C no.4
• /
• pp.265-278
• /
• 2011

The objective of this paper is to analyze and characterize end-to-end packet statistics after modeling and simulation of WiFi (IEEE 802.11g) and WiMAX (IEEE 802.16e) of a virtual wireless network using OPNET Modeler Wireless Suite. Wireless internal and external network simulators such as Remcom's Wireless InSite Real Time (RT) module, WinProp: W-LAN/Fixed WiMAX/Mobile WiMAX, and SMI system, are designed to consider data transfer rate based on wireless propagation signal strength. However, we approached our research in a different perspective without support for characteristic of these wireless network simulators. That is, we will discuss the purpose of a visual analysis for these packets, how to receive each point packets (e.g., wireless user, base station or access point, and http server) through end-to-end virtual network modeling based on integrated wired and wireless network without wireless propagation signal strength. Measuring packet statistics is important in QoS metric analysis among wireless network performance metrics. Clear packet statistics is an especially essential metric in guaranteeing QoS for WiMAX users. We have found some interesting results through modeling and simulation for virtual wireless network using OPNET Modeler Wireless Suite. We are also able to analyze multi-view efficiency through experiment/observation result.

• Tunnel and Underground Space
• /
• v.19 no.6
• /
• pp.473-478
• /
• 2009

The accuracy of point load apparatus is depend on point to point coaxial fitting. Also, the estimation of applied point load using the pressure gauge frequently lead to erroneous results. An improved point load apparatus has been developed in this study by mounting linear bearing on polished support rod, and eccentric error of point to point axis has been sustained less than 0.1 mm even under series of extreme work load conditions. Two digital displacement gauges are attached to measure the distance from point to point with sample specimen. A load cell mounted at the end of upper conical platen measure the applied net load on sample instead of preassure gauge. Total of 107 point load tests has been achieved to assure the quality and performance of developed apparatus. This exercise turned out to be successful.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.12
• /
• pp.1583-1588
• /
• 2007

PC-camera based automatic titration was executed in the acidity analyses of vinegar, milk and Takju. The average hue value (Havg) of 144 pixels in the image of the sample solution being titrated was computed and followed up at regular time intervals during titration in order to detect the titration end point. The Havg increase of 5 degrees from the first Havg was regarded as reaching at the end point in the cases of vinegar and milk. The Havg increase set up to detect the end point was 70 degrees in the case of Takju. In the case of vinegar, the volume of added titrant (0.1 N NaOH) was $21.409{\pm}0.066mL$ in manual titration and $21.403{\pm}0.055mL$ in automatic titration (p=0.841). In the case of milk, it was $1.390{\pm}0.025mL$ in manual titration and $1.388{\pm}0.027mL$ in automatic titration (p=0.907). In the case of Takju, it was $4.738{\pm}0.028mL$ in manual titration and $4.752{\pm}0.037mL$ in automatic titration (p=0.518). The high p values suggested that there were good agreements between manual and automatic titration data in all three food samples. The automatic method proposed in this article was considered to be applicable not only to acidity titrations but also to most titrations in which the end points can be detected by color change.

• Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.48-53
• /
• 2002

The HACCP (hazard analysis critical control point) concept becomes an important aspect of Good Manufacturing Practices (GMP) in safe food production. The HACCP plan was developed with food safety objective. The authors already carried out hazards analysis on Changran Jeotgal manufacturing process in a previous report. In this study we developed a HACCP plan on the manufacturing process of Changran Jeotgal. We could decide two CCPs those were salt concentration and eliminations of foreign materials before packaging. Foreign materials should be certainly checked out with laser detector just before packaging. Salt should be maintained more than $8\%$ to inhibit pathogenic bacteria in end product. On the Jeotgal process free water is removed after salting and Jeotgal is seasoned with several subsidiary materials such as com syrup. In result end products have $8\%$ salt with water activity 0.82. Most bacteria are inhibited but some can live in this condition. Materials on the working may be contaminate by pathogens, chemicals or physical hazards. It will be decreased by SSOP (standard sanitary operating program). The SSOP needed in Jeotgal plants is nearly same as other general food manufacturing plants but essential to fulfill HACCP program.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.1
• /
• pp.101-105
• /
• 2008

This paper proposes an analytical model to calculate VoIP (Voice of IP) capacity over wireless LANs with frequent bit errors. Since the traditional analytical models for VoIP capacity have not included the effect of bit errors, simulations ould only evaluate VoIP capacity over erroneous channels. For analytically accurate estimation of VoIP capacity over noisy channels, we extend the conventional model to include the effect of propagation errors, end-to-end delay, voice quality, the waiting time in AP(Access Point). The experiments show that our model predicts the VoIP capacity of a given network within the range from 3% to 9% difference comparing with the simulation results.

• Journal of the Korean Home Economics Association
• /
• v.35 no.4
• /
• pp.95-110
• /
• 1997

According to the design method for constructing the crotch angle of traditional Korean men's trousers there are differences in from after its completion. Since there is no standardization of visual & aesthetic pattern for the construction method which is stablished by the calculation formular of waist girth hip girth pantleg end and upper outer leg length it is difficult to be used for educational use or for teaching materials. Therefore the purpose of this project according to five models in proportion to the physical standard of Korea in ages from 24 to 29 years old is to establish a design criterion and the standardization of construction methods by introduction the pant construction method of the crotch angle by converting the sitting posture length to seaming crotch center point both knees width in the Korean way of sitting. The production method for the pattern design is as follow: (1) The waist girth formular is {{{{ { w} over {4 } }}}}+{{{{ {w} over {10 } }}}}(2) The hip girth formular is {{{{ {H } over { 4} }}}}+{{{{ {H } over {5 } }}}}(3) The pantleg end formular is {{{{ {H } over {4 } }}}}(4) A crotch angle is fixed at 70 degress.(5) The ratio of outer leg length to leg width is 5:8 (6) The component ratio of the upper outer leg length to the pant length in 5:8(7) The ratio of the division point of front / right inner leg length and left inner leg width to upper outer leg length is 5 : 8

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.323-328
• /
• 2003

A basic design on a flexible riser in a floating type development system for upwelling deep ocean water is presented. In the numerical study, an implicit finite difference algorithm is employed for three-dimensional riser equations. Fluid and geometric non-linearity and bending stiffness are considered and solved by Newton-Raphson iteration. To keep the depth of end point of a flexible and light riser is very important for upwelling deep ocean water in a floating type development system. Weight attached at the end point of the riser in order to keep its intake depth is designed under the strong surface current and the configuration of the riser is predicted. The results of this study can be contributed to the design of the development system in floating type for upwelling deep ocean water.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.397-400
• /
• 2005

In this paper, folded PIFA is proposed by using folding the end point of PIFA for the automobile DMB antenna. By turning down the end point on the opposite side of shortstrip, resonance frequency is presented at not $\lambda$/4 but $\lambda$/10. So the folded PIFA has size reduction effect approximately 60 % as compared to the conventional PIFA. Also by using the parasitic patch, folded PIFA provides wide band performance. As a result, the designed antenna can be in the application of Digital Multimedia Broadcasting(180 $\sim$ 210 MHz) antenna for the automobile.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1827-1835
• /
• 1996

This paper addresses the problem of a torch path generation for the 2D laser cutting of a stock plate nested with resular or irregular parts. Under the constaint of the relative positions of parts enforced by nesting, the developed torch path algorithm generate feasible cutting path. In this paper, the basic object is a polygon( a many-slide figure) with holes. A part may be represented as a number of line segments connected end-to-end in counterclockwise order, and formed a closed contour as requied for cutting paths. The objective is to tranverse this cutting contours with a minimum path length. This paper proposes a simulated annealing based dtorch path algorithm, that is an improved version of previously suggested TSP models. Since everypiercing point of parts is not fixed in advance, the algorithm solves as relazed optimization problem for the constraint, thich is one of the main features of the proposed algorithm. For aolving the torch path optimization problem, an efficient generation mechanism of neighborhood structure and as annealing shedule were introduced. In this way, a global solution can be obtained in a reasonable time. Seveeral examples are represented to ilustrate the method.

• Biomolecules & Therapeutics
• /
• v.13 no.1
• /
• pp.59-63
• /
• 2005

A kinetic assay was carried out in order to compare the ability of detection for prekallikrein activator(PKA) in plasma-derived products with that of an endpoint assay and a commercial method. Using these methods, 9 human albumin preparations were assayed and compared to each other. The coefficient of variation between the Kinetic assay and the end point assay was found within 6.6% and this result showed that two methods were highly correlative and the end point assay could act as a replacement of the kinetic assay. Another important goal of this study was to investigate the reproducibility among laboratories on the kinetic assay. A collaborative study was performed to validate the kinetic method with intra and inter assays. The coefficient of variation for the intra assay of each laboratory was less than 4% and that for between individuals in the inter assay was 4.1%. These results revealed that the kinetic assay showed good reproducibility. The contents of PKA in plasma-derived products were also determined by the kinetic assay. As a result, it was found that trace amounts of PKA were present in 32 human immunoglobulin preparations, however the average concentration of PKA in 171 albumin preparations was 5.8 IU/mL.