• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.1
• /
• pp.65-70
• /
• 1970

This report is a part of the studies of the lower part of the Naktong River. The temperature and quality of the river water were investigated from May 1967 to June 1968. Except for Hadan which is a point located at the mouth of the river and much Influenced by sea water the average water temperature is generally below $10^{\circ}C$ up to the end of March, 10 to $20^{\circ}C$ from the beginning of April to the 1st-2nd ten days of May, and thereafter becomes above $20^{\circ}C$ which is adequate for the growth of warm-water fishes. The water again becomes below $20^{\circ}C$ at the beginning of October and becomes below $10^{\circ}C$ in December The difference of water temperature between at 7.00 a.m. and 4.00 p.m. is considerably great at Hadan, the mouth of the river, where the water is relatively stagnant. It shows an average monthly difference of 2.6 to $6.8^{\circ}C$ with a total average difference of $4.6^{\circ}C$. At the Kupo and Samrangjin stations the difference is very small For the basic data In the management of rivers, the water temperature should be measured twice a day at its highest and lowest temperatures, and the long term fluctuation of temperature should be investigated.

• Restorative Dentistry and Endodontics
• /
• v.30 no.5
• /
• pp.393-401
• /
• 2005

The purpose of this study was to compare the canal configuration after shaping by ProTaper rotary files and ProTaper hand files in resin simulated canals. Forty resin simulated canals with a curvature of J-shape and S-shape were divided into four groups by 10 blocks each Simulated root canals in resin block were prepared by ProTaper rotary files and ProTaper hand files using a crown-down pressureless technique All simulated canals were prepared up to size $\#25$ file at end-point of preparation. Pre- and post-instrumentation images were recorded with color scanner. Assessment of canal shape was completed with an image analysis program. Measurements were made at 0, 1, 2, 3, 4, 5, 6 and 7 mm from the apex. At each level, outer canal width, inner canal width, total canal width, and amount of transportation from original axis were recorded. Instrumentation time was recorded. The data were analyzed statistically using independent t-test. The result was that ProTaper hand files cause significantly less canal transportation from original axis of canal body and maintain original canal configuration better than ProTaper rotary files, however ProTaper hand files take more shaping time.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.553-561
• /
• 2016

The purpose of this study was to compare cardiopulmonary function, RPE(Rating of perceived exertion), and blood lactate when examining the GXT(Graded exercise testing) of wheelchair treadmill and arm ergometer. Participants were 11 wheelchair basketball players with non disability. While examining the GXT of wheelchair treadmill and arm ergometer, cardiorespiratory functional capacity was measured by using $Quarkb^2$ and Polar and RPE was measured through Borg Scale. The lactate analyser, YSI-2000 was used to measure blood lactate level when resting, right after exercise, two minutes, four minutes, six minutes, and ten minutes of recovery. Data was analyzed by paired t-test using SPSS 18.0 program and significance for all statistical analysis was fixed at .05 confidence level(p<0.05). The conclusion of this study is below. First, maximal oxygen uptake which is a factor of cardiopulmonary function showed the highest with arm ergometer, the rate of respiratory exchange showed the highest with wheelchair treadmill, and maximal heart rate showed the highest with wheelchair treadmill. Second, subjective exercise intensity showed the highest with arm ergometer at the end point. Third, blood lactate level showed the highest with arm ergometer right after exercise.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.80-85
• /
• 2010

In this paper, a MIMO antenna is proposed for LTE/DCSl800/USPCSl900 handset applications. The proposed antenna is based on the IFA and its wide bandwidth is obtained by using a stagger tuning technique. To improve the isolation, a suspended line is connected to the shorting points in two antennas, and capacitors and inductors are added to the connected suspended line. Two identical antennas of which dimension is 2.8cc($40{\times}10{\times}7mm$) are mounted on the two end lines of the system ground plane($40{\times}60mm$). Analysis of the antenna performance and optimization is performed using CST Microwave Studio. The bandwidths are satisfied for LTE band class 13(746-787MHz), class 14(758-798MHz) and DCSl800/USPCSl900 band (1710-1990MHz). The isolations between two antennas are about -12dB for LTE band and -10dB for DCSl800/USPCSl900 band. And the radiation efficiency of each antenna is about for LTE band 33% and 45% for DCSl800/USPCSl900 band respectively.

• 한국벤처창업학회:학술대회논문집
• /
• 2010.08a
• /
• pp.71-89
• /
• 2010

It is strongly believed that multicast will become one of the most promising services on internet for the next generation. Multicast service can be deployed either on network-layer or application-layer. IP multicast (network-layer multicast) is implemented by network nodes (i.e., routers) and avoids multiple copies of the same datagram on the same link. Despite the conceptual simplicity of IP multicast and its obvious benefits, it has not been widely deployed since there remain many unresolved issues. As an alternative to IP multicast, overlay multicast (application-layer multicast) implements the multicast functionality at end hosts rather than routers. This may require more overall bandwidth than IP multicast because duplicate packets travel the same physical links multiple times, but it provides an inexpensive, deployable method of providing point-to-multipoint group communication. In this paper we develop an efficient method applied greedy algorithm for solving two models of overlay multicast tree building problem that is aimed to construct MDST (Minimum Diameter Spanning Tree : minimum cost path from a source node to all its receivers) and MST (Minimum Spanning Tree : minimum total cost spanning all the members). We also simulate and analyze MDST and MST.

• The Journal of Natural Sciences
• /
• v.14 no.2
• /
• pp.103-114
• /
• 2004

This study aims at investigating the effect of soil moisture control and truss limited high density culture on the growth, fruit yield and quality of tomato. To minimize of loss yield of tomato, flower cluster in number was limited to two and three truss and planting density was raised. Soil moisture control was started from 40 days after anthesis and irrigation point was set in -30kPa and -50kPa, which were compared with -10kPa For high density culture, the planting number of truss limited high density culture was planted twice as many as control. Soil moisture repression reduced the growth of stem diameter, leaf and plant height. Leaf chlorophyll content was higher in -50kPa and -30kPa than control. No significant differences, however, shows in -10kPa. The occurrence rate of bloom-end rot and cracking was increased by growing of irrigation repression. Pinching three fruit truss was higher than pinching two fruit truss in the occurrence rate of them. Soil moisture repression resulted in the reduction of fruit weight and in special, truss limited high density was distinctly decreased in -50kPa. The number of fruit was not affected by soil moisture control, but 3rd flower cluster was lower than 2nd flower cluster in the number of fruits and 2nd one was lower than 1st one. Under irrigation repression, rate of dry matter tended to grow in -30kPa, -50kPa compared with control and pinching three fruit truss was higher than two truss. Marketable yield dropped to 36.7%m 46.3 in -30kPa, -50kPa on pinching two fruit truss and dropped to 27.3%, 32.3% in 3rd flower cluster compared with control.

• Journal of National Security and Military Science
• /
• s.8
• /
• pp.1-48
• /
• 2010

The purpose of this study is to examine and analyze the Untied Nations' efforts for peace on Korean peninsular after CCF's participation in Korean War. The Untied Nation tried to negotiate th peace plan between two sides from the end of 1950. Once the CCF's entry into the war had been confirmed, the war situation moved to a new phase, and the UN forces, which had guided the war in an effort to destroy the NKP A forces, and to punish North Korea, had to set up new guidelines to cope with the new situation. Accordingly, in late November, 1950, the UN forces camp, mainly the US Joint Chiefs of Staff and the United Nations Command, discussed various options, such as an expansion of the war up to the Chinese territory, a cease fire along the 38th Parallel, or a forced and inevitable evacuation. The Korean delegation to the UN insisted that "the unification of Korea should be achieved only by victory in the war. The Chinese intervention in the war is a Challenge to the UN in the same way as the North Korean invasion. The UN participation in the war was to repulse the invasion. With the same spirit we should drive back the Chinese Communists." The Korean delegation also emphasized to the friendly nations the political objective and will of unification, and that a cease fire at a threshold of unification might return us to the status quo ante bellum, and would be contrary to the Korean nation's desire. At that time, particularly, the US strongly considered the employment of nuclear weapons as one of the new strategies to cope with the Chinese invasion. The international effects of these casual remarks were realized almost at once. The British Prime Minister who had not wanted the expansion of war in the Far East, especially from the view point of the interest of NATO's security, visited Washington. so the conference had a very important meaning for the UN forces' new strategy. On the other hand, at the UN, on the 5th of December, the very day Truman and Attlee agreed to seek a cease-fire under UN auspices, a group of thirteen Asian and Arab states proposed to ask China and North Korea not to cross the 38th Parallel, and sounded out both sides about a cease fire along the 38th Parallel. The United States and the United Kingdom gave their assent, but China and North Korea gave no direct response. The CCF, who were securing the initiative of operation, were not agreeable with the proposal of the UN forces. The Untied Nation has tried to negotiate th peace plan between two sides from the December of 1950 and January of 1951. The Untied Nations' has achieved great results to negotiate for the peace plan on Korean peninsular after CCF's participation in Korean War. It's the results considering both the operation situation and political opinions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.145-152
• /
• 2009

Domestic Kori-1 MCR was partially modified in 2007 and will be renovated entirely in 2013. Digital devices partially replacing original analog devices have been introduced and standard alone computer systems such as SPDS have been integrated into the plant computer. Upgrading KSNP's MCR based on the ditalization is planned for 2015. However, the site engineers and operators are reluctant to the advanced systems. Therefore, a prototype for the KSNP's advanced MCR has been developed to increase the acceptance level of the operators and field engineers and also, to evaluate user interfaces and I&C architecture. For enhancing support of the operators' work, a P&ID based display system composed of multi-layers, which are linked through a context sensitive menu each other, has been adopted. The $1^{st}$ layer displays a simplified P&ID, the $2^{nd}$ layer control related diagrams such as controllers and logic diagrams, the $3^{rd}$ layer trends, etc. The end point view of MCR for KSNP is also suggested considering reliability and operability of the digital systems. Additionally, modernization strategies over the overhaul periods, that do not have much impact on operation and configuration efforts are suggested.

• Clean Technology
• /
• v.20 no.2
• /
• pp.171-178
• /
• 2014

In this study we have examined the health risk factors and analyzing data of laborers working at the welding operation at large-sized casting process. In order to improve the working environment of workplace, an effective ventilation method was proposed after performing CFD (computational fluid dynamics) modeling and measurement of pollutants. As a result of examining the health risk factors of workers, oxidized steel dust is the main pollution source in the company A, welding fume in the companies B and C, and welding fume and oxidized steel dust in the company D. The fume concentration in the workers' breathing zone was $0.05{\sim}4.37mg/m^3$, and the fume concentration in the indoor air at the welding process was $0.13{\sim}7.54mg/m^3$. From a result of CFD, a local exhaust with an exhaust duct adjacent to welding point was found to be most effective in case of the exhaust process. In case of air supply, we found that a desired location of air supply fan would be at the end of the opening. If a standardizing the ventilation system for tunnel-type semi-enclosed space at a large-sized casting process is introduced in welding work places in the future, it would be more effective to protect the health of welding workers working at the casting industry and shipbuilding industry and improve the work environment.

• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.3
• /
• pp.324-339
• /
• 2005

The WTO/DDA Negotiation on the Fisheries Subsidies started by DDA(Doha Development Agenda : 2001.11)at early 2002 has been held about 20 times until the fist half of 2005. The Negotiation will be terminated until the end of 2005 but now, it is impossible to predict the exact conclusion of the Negotiation. There is a sharp conflict of opinion on the WTO/DDA Negotiation on the Fisheries Subsidies between FFG(Fish Friends Groups : USA, New Zealand etc) and Anti-FFG(Rep. Korea, Japan etc). The Fisheries Subsidies is regulated by the WTO/DDA Negotiation that regulates on the subsidies of industrial products, fisheries products, forest products. Considering the progress of the WTO/DDA Negotiation on the Fisheries Subsidies, Guidelines for the Fisheries Subsidies Negotiation were established in Doha Ministerial Declaration at 2001 and a necessity of a special regulation on the Fisheries Subsidies has been discussed from 2002 to 2004. After june, 2004, the Negotiation was proceeding as Rep. Korea, Japan and Taiwan agreed with discussing a special regulation on the Fisheries Subsidies and At 1st, August, 2004, they reached an agreement on a necessity of a special regulation on the Fisheries Subsidies. At Feb, 2005, discussion was suspended because of presenting the joint proposal from 3 countries(Rep. Korea, Japan and Taiwan) and now discussion on the Fisheries Subsidies is giving the first consideration to classification of prohibited/non-actionable subsidies, S&D of a developing countries, small fisheries, problems of farming, grace period etc. From now on, Considering the 18th~the 20th negotiations, it is expected that discussion of fisheries subsidies regulation including property and range of prohibited/non-actionable subsidies, S&D of a developing countries, a definition of small fisheries is accelerated. In this point of view, this paper analyzed and arranged every country's proposals holding our own position and took a survey to fishermen and fisheries experts about prohibited/non-actionable subsidies. In addition, this paper intends to suggest the way of future-negotiation and provides essential data to help government's policy making through analyzing prohibited/ non-actionable subsidies, farming subsidies, S&D of a developing countries, small scale fisheries.