• 접착 및 계면
• /
• 제5권1호
• /
• pp.21-28
• /
• 2004

본 연구에서는 사슬말단에 chloropropyl 유기관능그룹을 가지고 있는 실란결합체인 3-chloropropyltrimethoxysilane(CTMS)을 사용하여 여러 농도에서 유리섬유 표면에 사이징 처리하여 유리섬유/나일론 6 및 유리직물/나이론 6 복합재료를 제조하였다. 단섬유 microbonding 시험에 의한 유리섬유/나일론 6 복합재료의 계면전단강도와 short-beam 전단시험과 동역학적 열특성 분석 방법을 통하여 유리직물/나일론 6 복합재료의 층간전단강도 및 저장탄성률에 미치는 결합체 농도의 영향을 각각 조사하였다. CTMS 결합제의 농도가 증가할수록 복합재료의 계면특성이 향상되었다. 결합제의 농도 변화에 대한 유리섬유강화 나일론 6 복합재료의 계면전단강도, 층간전단강도, 층간파단양상 그리고 저장탄성률 등 각 특성 변화의 경향이 서로 일치하였다.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.119-126
• /
• 2004

In this study, the influence of silane coupling agents, featuring different organo-functional groups on the interlaminar and thermal properties of woven glass fabric-reinforced nylon 6 composites, has been by means of short-beam shear tests, dynamic mechanical analysis, scanning electron microscopy, and thermogravimetric analysis. The results indicate that the fiber-matrix interfacial characteristics obtained using the different analytical methods agree well with each other. The interlaminar shear strengths (ILSS) of glass fabric/nylon 6 composites sized with various silane coupling agents are significantly improved in comparison with that of the composite sized commercially. ILSS of the composites increases in the order: Z-6076 with chloropropyl groups in the silanes > Z-6030 with methacrylate groups> Z-6020 with diamine groups; this trend is similar to that of results found in an earlier study of interfacial shear strength. The dynamic mechanical properties, the fracture surface observations, and the thermal stability also support the interfacial results. The improvement of the interfacial properties may be ascribed to the different chemical reactivities of the reactive amino end groups of nylon 6 and the organo-functional groups located at the ends of the silane chains, which results from the increased chemical reactivity in order chloropropyl > methacrylate > diamine.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.532-535
• /
• 2000

We have fabricated a sensor system for on-line monitoring the oxygen permeability and diffusivity of six different polymer films using the miniaturized 6 cathode(Ag)-single anode(Ag/AgCl) type hexagonal oxygen electrode. This system consists of multiple input front-end electronics, signal conditioning circuit using the embedded microcontroller 80C196KC, PC interface circuit and PC with the OS for microcontroller and the operating program for this system. The digital low-[ass filter was programmed and the simulated filter characteristics were enough to eliminate the noise from sensor signal. According to the experimental results, the linearity coefficients of the output voltage to oxygen partial pressure for each sensor electrode of six cathode type oxygen sensor are 0.998, 0.997, 0.998, 0.997, 0.997, 0.997 respectively, and the response times are all within 4 minutes.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권5호
• /
• pp.213-213
• /
• 2003

We investigated the monolayer behavior at the air-water interface with metal solution, the surface morphologies and the electrical properties such as conductivity, The calculated conductivity values of pure water subphase and its complexes with L $i^{+}$ ions are 5.6$\times$10$^{-l6}$ and 1.9$\times$10$^{-14}$ [S/cm], respectively. And the calculated barrier height D values of pure water subphase and its complexes with Li. ions are 0.70 and 0.66 [eV], respectively. We also attempted to fabricate a crown dendrimer Langmuir-Blodgett (LB) films containing functional end group that could form a complex structure with metal ions. Also, we investigated the surface activity of dendrimer films at air-water interface. In AFM images. the larger domains irregularly shaped structures on the top while the smaller ones were free from such defects. In conclusion, it is demonstrated that the metal ion around dendrimer and polymer included crown function group can contribute to make formation of network structure among crown function group and result in change of electrical properties.s.s.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권5호
• /
• pp.213-218
• /
• 2003

We investigated the monolayer behavior at the air-water interface with metal solution, the surface morphologies and the electrical properties such as conductivity, The calculated conductivity values of pure water subphase and its complexes with L $i^{+}$ ions are 5.6$\times$10$^{-l6}$ and 1.9$\times$10$^{-14}$ [S/cm], respectively. And the calculated barrier height D values of pure water subphase and its complexes with Li. ions are 0.70 and 0.66 [eV], respectively. We also attempted to fabricate a crown dendrimer Langmuir-Blodgett (LB) films containing functional end group that could form a complex structure with metal ions. Also, we investigated the surface activity of dendrimer films at air-water interface. In AFM images. the larger domains irregularly shaped structures on the top while the smaller ones were free from such defects. In conclusion, it is demonstrated that the metal ion around dendrimer and polymer included crown function group can contribute to make formation of network structure among crown function group and result in change of electrical properties.s.s.

• Elastomers and Composites
• /
• 제44권2호
• /
• pp.122-133
• /
• 2009

고무는 천연 고무를 비롯하여 부타디엔 고무, 스티렌-부타디엔 고무, 니트릴-부타디엔 고무, EPDM, 염소화 고무 등 산업적 요구에 따라 발전하여 왔다. 광범위한 분야에서 고무가 사용됨에 따라 새로운 물성을 갖는 합성 고무나 개질 고무의 생산이 필요하게 되었다. 본 리뷰 논문에서는 이중 결합을 포함하는 고무의 화학적 개질을 통하여 고무의 구조를 변화시키거나, 관능기, 이종 고분자 등을 도입하는 몇 가지 방법들에 대하여 정리해 보고자 한다. 특히, 최근에 많은 응용이 시도되고 있는 리빙 라디칼 중합법에 의한 고무의 개질을 소개하고 이의 효과를 알아보고자 한다.

• 한국포장학회지
• /
• 제30권1호
• /
• pp.1-14
• /
• 2024

환경문제에 대한 관심이 증가함에 따라 지속가능한 소재에 대한 요구가 증가하고 있다. 전 세계적으로 커피는 가장 많이 소비되는 음료이며, 커피음료의 가공 및 소비로 발생하는 커피 부산물에는 셀룰로오스, 헤미셀룰로오스, 리그닌, 지질 및 생리활성물질 등이 풍부하지만 대부분 폐기되는 실정이다. 따라서, 많은 연구자들이 커피 부산물을 고부가가치 소재로 개발하기 위하여 노력하고 있다. 본 총설에서는 고분자/커피 은피 복합화 연구, 커피 은피로부터 셀룰로오스 추출 및 응용연구, 고분자/커피찌꺼기 복합화 연구, 커피찌꺼기로부터 셀룰로오스 추출 및 이를 활용한 연구, 커피찌꺼기로부터 지질 추출 및 이를 활용한 PHAs합성, 가소제로써 커피찌꺼기로부터 추출한 지질의 응용가능성 연구 등에 대하여 조사하였다. 선행 연구에서는 커피 부산물인 커피 은피 및 커피찌꺼기 자체를 고분자와 혼합하여 복합소재를 제조하고 물성을 평가하는 연구는 광범위하게 수행되고 있는 것으로 확인되었다. 하지만, 커피 은피 및 커피찌꺼기로부터 나노셀룰로오스를 추출하거나, 상대적으로 친수성인 커피 부산물과 소수성인 석유계 고분자 또는 생분해성 고분자와 복합화 시 상용성 개선과 관련된 커피 부산물의 표면 개질 및 상용화제 도입 등의 연구는 부족함을 확인하였다. 또한 커피 부산물로부터 추출한 지질을 활용하여 PHAs를 합성하는 연구가 일부 진행되고 있지만 합성된 PHAs를 활용하여 포장소재로의 제조 및 응용에 관한 추가적인 연구가 필요하다고 사료된다. 또한, 커피찌꺼기의 발생량 대비 국내외 관리방안 마련 및 제품 적용 시 안전성 평가방법에 관한 연구는 거의 실시되지 않아 이에 대한 추가적인 연구가 필요하다고 판단된다.

• 대한화장품학회지
• /
• 제25권4호
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and E and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then the on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to form a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5:1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin's moisture. Vitamins A and E contribute to preventing skin aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer. The crystalline structures of gel were surface-chemically-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC. Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Daegeon and Pusan in Korea and Hokkaido, Osaka and Miyazaki in Japan with correlation to the climate.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 1999년도 IFSCC . ASCS 학술대회 발표 논문
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and I and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have ·to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then tile on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to from a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5 : 1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin’s moisture. Vitamins A and I contribute to preventing skin’aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer, The crystal 1 me structures of gel were surface-chemical1y-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC, Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Baegeon and Pusan in Korea and Hokkaido, Oska and Miyazaki in Japan with correlation to the climate.

• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.18-26
• /
• 2012

In this work, colorants extraction process from gromwell was studied for making powder form of colorants by solving the high viscosity problem of gromwell extracts. In order to do that, sugar extracted together with colorants must be pre-extracted. For sugar decomposition, gromwell roots were pretreated with various enzyme solutions. The total sugar content of pre-extract with enzyme solution was measured. Accordingly, the effects of enzyme type and pretreatment condition on sugar decomposition were investigated to find appropriate enzyme(amylase, hemicellulase, pectinase) and enzyme activity (100~1000unit), pre-extracted time(3~24hr). Color characteristics and dye uptake of dyed fabrics were evaluated. Gromwell colorants were assessed for their potential antimicrobial activities, which possibly expand their end use as functional pigments. The efficiency of removing sugar was increased in the order of hemicellulase, pectinase, amylase, $H_2O$. Gromwell colorants powder yield was in the range of 4.4% to 9.8% depending on pretreatment enzyme. Gromwell colorants produced RP color on the silk and wool fabrics with good dye uptake. Antimicrobial activity of gromwell colorants will greatly increase its potentiality for applying as functional natural colorants in the future.