• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.505-511
• /
• 2007

Poly(lactide-co-glycolide)(PLGA) and hyaluronic acid (HA) has been widely used as biocompatible scaffold materials to regenerate tissue. In this present study, we fabricated microporous PLGA and HA loaded PLGA scaffolds by a emusion freeze-drying method. In order to confirm that the release profile of cytokine or water-soluble drugs, we manufactured the granulocyte macrophage colony stimulating factor(GM-CSF) loaded PLGA and HA-PLGA scaffold. All scaffolds were characterized using scanning electron microscope(SEM), mercury porosimeter and wettability measurement. Cell proliferation and viability were assessed by a 3-(4,5-dimethylthiazole-2-yl)-2,5-diphenyltetrazolium-bromide (MTT) test. The porosity of HA-PLGA scaffold was greater than 95% with the total pore area of $261\;m^2/g$. The HA-FLGA scaffold exhibited well interconnected pores to allow greater cell adhesion and prolixferation. It was proven by higher cell viability in the HA-PLGA scaffold than PLGA alone. This may be due to the enhanced natural properties and higher water retention capacity of HA.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.28-33
• /
• 2013

Zaltoprofen, a propionic acid derivative non-steroidal anti-inflammatory drug, was known to have powerful inhibitory effects on acute, subacute and chronic inflammation. For initial release and sustained release, the microspheres were prepared using an emulsion-solvent evaporation method like an O/W emulsion method with varying the ratio of zaltoprofen-loaded polyoxalate (POX)/PLGA micropheres. The morphology of the microspheres was confirmed by scanning electron microscopy. The crystallinity of microspheres was analyzed by X-ray diffraction and differential scanning calorimeter. Fourier transform infrared spectroscopy was used to analyze the chemical structure of microspheres. The increased ratio of POX microspheres affected the initial drug release, and the sustained release of drug was influenced by ratio of PLGA microspheres. In this study, the initial release behavior of zaltoprofen can be controlled by the ratio of POX/PLGA microspheres.

• Preventive Nutrition and Food Science
• /
• v.3 no.4
• /
• pp.382-386
• /
• 1998

A soluble dietary fiber, $\beta$-glucan, contained in oat and barley has nutritional benefits such as hypocholesterolemic effects and influences blood glucose regulation. The contents of $\beta$-glucan in both cereals range from 3 to 7% with the exception of a certain barley genotype which contains up to 16% $\beta$-glucan. $\beta$-Glucan is distributed mainly in the cell walls of endosperm and the distal (bran) portion of kernel. Various procedures have been developed for increasing the extraction yield of $\beta$-glucan. Oat gum prepared with weak alkali extractionand alcohol proecipitation following protein removal usually contains 80% $\beta$-glucan.The most commonly used method for $\beta$-glucan quantitiation is an enzymatic procedure combining lichenase plus $\beta$-glucosidase followed by measuring the amount of glucos released by glucose oxidase-peroxidase treatment. The increase in foam-and emulsion-stabilizing capacity of $\beta$-glucan is due to the increase in viscosity of the aqueous phase. Therefore, $\beta$-glucan shows great potentials as a thickener and a stabilizer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.158.2-158.2
• /
• 2010

본 논문은 정부의 연구 지원에 의해 폐유를 유화 방법으로 재활용한 유화정제연료유의 저장안정성 측정방법을 마련하고자 실시하였다. 국내외 유화정제연료유 저장안정성 시험방법이 마련되지 않아 ASTM D 3707, 지식경제부 '석유대체연료의 성능평가기준과 품질시험방법 등에 관한 고시' 별표4 유화연료유 저장안정성 평가방법(습식법) 등 유화연료유의 저장안정성 시험방법을 근간으로 하여 $40^{\circ}C$에서 30일 동안 저장용기에 저장하면서 매 10일 마다 상 하층 수분함량을 측정하는 방법을 제시하였고, 이에 대한 전반적인 연구 내용을 언급하였다.

• Elastomers and Composites
• /
• v.52 no.4
• /
• pp.272-279
• /
• 2017

The heterocoagulation of latex is a simple and useful method to fabricate various polymer nanocomposites in which a precise control of the colloid stability is essential. In this work, a multi-layered graphenes (MLGs)/poly(styrene-co-butyl acrylate) (P(S-co-BA)) nanocomposite having an excellent dispersion of MLGs was prepared via the sudden heating heterocoagulation process. The P(S-co-BA) component was obtained by emulsion polymerization. This process can effectively shorten the process and particles growth steps. The colloid stability of these dispersions was controlled by factors such as ionic charge, temperature, and reaction times. The influence of these factors on heterocoagulation was evaluated and the properties of the nanocomposites were investigated. The conductivity of the MLGs/P(S-co-BA) nanocomposites increased from -11.53 to -5.70 S/cm for an increase in MLG content from 0.01 to 5 wt%. Moreover, percolation threshold was observed in the case of 0.01 wt% MLGs.

• Korea-Australia Rheology Journal
• /
• v.20 no.2
• /
• pp.51-58
• /
• 2008

This paper describes a two-step Tikhonov regularization procedure for converting the steady shear data generated by parallel-disk viscometers, in the presence of wall slip, into a shear stress-shear rate function and a wall shear stress-slip velocity functions. If the material under test has a yield stress or a critical wall shear stress below which no slip is observed the method will also provide an estimate of these stresses. Amplification of measurement noise is kept under control by the introduction of two separate regularization parameters and Generalized Cross Validation is used to guide the selection of these parameters. The performance of this procedure is demonstrated by applying it to the parallel disk data of an oil-in-water emulsion, of a foam and of a mayonnaise.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.3
• /
• pp.39-45
• /
• 1998

In recent years, there has been considerable interest in the development of new functional surfactant including new type of anionic surfactants. Anionic surfactants, ${\alpha}-sulfo$ fatty acids that straight long chain alkyl group having from 12 to 18 carbon atoms, were synthesized with sulfur trioxide-dioxane complex to good yield. Xylitol ${\alpha}-sulfo$ fatty acid esters were obtained by reaction that the acetification and esterification of xylitol, by addition reaction with sodium chloride and hydrolysis respectively. These compounds were a new group of destructible surfactants which readily hydrolyzed and oxidized in natural water reservoirs. Physical properties of these new compounds involved surface tension, critical micelle concentration(cmc), foaming power, emulsion power, and hydrolysis properties, were measured. The cmc values of the compounds by ring method were assumed to $7.0{\times}10^{-3}{\sim}3.0{\times}10^{-2}mol/{\ell}$ range and surface tensions at cmc were $25{\sim}31dyne/cm$ respectively.

• Journal of the Korean Ceramic Society
• /
• v.30 no.10
• /
• pp.811-818
• /
• 1993

Al2O3/ZrO2-Spinel composites were prepared by infiltrating magnesium sulfate solution into the porous preform made from Al2O3-20wt% ZrO2 composite powders derived through an emulsion route. The microstructure and composition of the modified composites could be controlled by manipulating the presingtering temperature of the preform, infiltration time, and so on. It was found that spinel phases were concentrated near the surface than in the interior of the Al2O3/ZrO2-Spinel composites infiltrated for 6hrs, while spinel phases were uniformly distributed in the comosites infiltrated for 2 days. The relative density and fracture toughness of the composite infiltrated for 6 hrs were 98.6% and 7.2MN/m3/2, respectively.

• Transactions of Materials Processing
• /
• v.14 no.7 s.79
• /
• pp.619-623
• /
• 2005

Lubrication and cooling characteristics are the most important factors of elevated temperature forging lubricants. Usually adopted lubricants in warm forging processes are graphite, synthetic and emulsion lubricants. Most widely and effectively applied lubricants are graphite lubricants, but these have a lot of problems like tool corrosion and dusty environment. In this research, boronite lubricant is considered, because it is able to substitute for graphite. Hot ring compression test, cooling test and mass production test are performed to check the validity of new lubrication pigment.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.1
• /
• pp.53-58
• /
• 2004

In this study, we describe the application of electron microscopes that incorporate freeze treatments or cryo systems to achieve the characterization of the microstuctures of emulsions. We confirmed that the preparations of freezing replica method and with cryo systems were useful to clarify the microstuctures of the emulsions. This methodology will be able to contribute to understanding the relation between microstuctures and rheology of emulsions.