• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.226-236
• /
• 2019

In this study, functional and emulsifying properties of oil extracted by supercritical carbon dioxide from balloonflower(Platycodon grandiflorum A. DC) seeds were investigated. The oil was lower in total polyphenol content(8 mg/100 g), but higher in ${\alpha}$-tocopherol(14.15 mg/100 g), ${\beta}$-sitosterol(116 mg/100 g) and stigmasterol(8 mg/100 g) contents than seeds. Based on DPPH radical scavenging activity, the oil($IC_{50}=1235.5{\mu}g/mL$) showed similar antioxidant activity to the seeds($IC_{50}=1138.2{\mu}g/mL$). At 1%(w/w) lecithin, O/W emulsion with balloonflower seeds oil had turbidity, microscopic image, mean particle size and emulsion stability similar to emulsion with soybean oil, but had lower turbidity and emulsion stability and larger mean particle size than emulsion with perilla seeds oil. Its surface tension was similar to perilla oil emulsion.

• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.43-51
• /
• 1993

Buckwheat protein isolate was tested for the effects of pH, addition of sodium chloride and heat treatment on solubility, emulsion capacities, emulsion stability, surface hydrophobicity, foam capacities and foam stability. The solubility of buckwheat protein isolate was affected by pH and showed the lowest value at pH 4.5, the isoelectric point of buckwheat protein isolate. The solubility significantly as the pH value reached closer to either ends of the pH, i.e., pH 1.0 and 11.0. The effects of NaCl concentration on solubility were as follows; at pH 2.0, the solubility significantly decreased when NaCl was added; at pH 4.5, it increased above 0.6 M; at pH 7.0 it increased; and at pH 9.0 it decreased. The solubility increased above $80^{\circ}C$, at all pH ranges. The emulsion capacity was the lowest at pH 4.5. It significantly increased as the pH approached higher acidic or alkalic regions. At pH 2.0, when NaCl was added, the emulsion capacity decreased, but it increased at pH 4.5 and showed the maximum value at pH 7.0 and 9.0 with 0.6 M and 0.8 M NaCl concentrations. Upon heating, the emulsion capacity decreased at acidic pH's but was maximised at pH 7.0 and 9.0 on $60^{\circ}C$ heat treatment. The emulsion stability was the lowest at pH 4.5 but increased with heat treatment. At acidic pH, the emulsion stability increased with the increase in NaCl concentration but decreased at pH 7.0 and 9.0. Generally, at other pH ranges, the emulsion stability was decreased with increased heating temperature. The surface hydrophobicity showed the highest value at pH 2.0 and the lowest value at pH 11.0. As NaCl concentrationed, the surface hydrophobicity decreased at acidic pH. The NaCl concentration had no significant effects on surface hydrophobicity at pH 7.0, 9.0 except for the highest value observed at 0.8 M and 0.4 M. At all pH ranges, the surface hydrophobicity was increased, when the temperature increased. The foam capacity decreased, with increased in pH value. At acidic pH, the foam capacity was decreased with the increased in NaCl concentration. The highest value was observed upon adding 0.2 M or 0.4 M NaCl at pH 7.0 and 9.0. Heat treatments of $60^{\circ}C$ and $40^{\circ}C$ showed the highest foam capacity values at pH 2.0 and 4.5, respectively. At pH 7.0 and 9.0, the foam capacity decreased with the increased in temperature. The foam stability was not significantly related to different pH values. The addition of 0.4 M NaCl at pH 2.0, 7.0 and 9.0 showed the highest stability and the addition of 1.0 M at pH 4.5 showed the lowest. The higher the heating temperature, the lower the foam stability at pH 2.0 and 9.0. However, the foam stability increased at pH 4.5 and 7.0 before reaching $80^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.345-351
• /
• 2005

Physicochemical properties and functionalities of sodium caseinate, whey protein, skim milk, and whole milk with or without transglutaminase (TGase, 200 : 1) at $38^{\circ}C$ were determined. After crosslinking by TGase, whey protein was effective in improving heat stability compared to native protein at over $70^{\circ}C$. Whole milk was stable with lower turbidity compared to native solution. Whey protein showed low hydrolysis degree, fewer than sodium caseinate, during early activation time and increased slightly thereafter Emulsifying activities of sodium caseinate at pH 2 and 8, and whey protein at pH 7 and 8 improved. Emulsion stability of sodium caseinate improved at entire pH range studied. Foam expansion and foam stability of samples improved with TGase-treatment. Viscosities of TGase-treated samples were higher than those of untreated ones.

• Food Science of Animal Resources
• /
• v.34 no.2
• /
• pp.207-213
• /
• 2014

This study investigated the effects of microbial transglutaminase (MTGase) and pH-shift processing on the functional properties of porcine myofibrillar proteins (MP). The pH-shift processing was carried out by decreasing the pH of MP suspension to 3.0, followed by re-adjustment to pH 6.2. The native (CM) and pH-shifted MP (PM) was reacted with and without MTGase, and the gelling and emulsion characteristics were compared. To compare the pH-shifted MTGase-treated MP (PT), deamidation (DM) was conducted by reacting MTGase with MP at pH 3.0. Rigid thermal gel was produced by MTGase-treated native MP (CT) and PT. PM and DM showed the lowest storage modulus (G') at the end of thermal scanning. Both MTGase and pH-shifting produced harder MP gel, and the highest gel strength was obtained in PT. All treatments yielded lower than CM, and CT showed significantly higher yield than PM and DM treatments. For emulsion characteristics, pH-shifting improved the emulsifying ability of MP-stabilized emulsion, while the treatments had lower emulsion stability. PM-stabilized emulsion exhibited the lowest creaming stability among all treatments. The emulsion stability could be improved by the usage of MTGase. The results indicated that pH-shifting combined with MTGase had a potential application to modify or improve functional properties of MP in manufacturing of meat products.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.3
• /
• pp.225-231
• /
• 2013

Oil in water nanoemulsion of astaxanthin was prepared by high pressure homogenization. The emulsifying conditions including emulsifier type, concentration and astaxanthin concentration were optimized. Stability of nanoemulsion was measured using zetasizer, freeze-fracture scanning electron microscope (FF-SEM), particle analyzer and colorimeter. The mean diameter of the dispersed particles containing astaxanthin ranged from 160 to 190 nm. Size distribution was unimodal and extended from 40 to 200 nm. The nanoemulsion prepared by glyceryl citrate/lactate/linoleate/oleate had smaller particle size and narrow size distribution. Stable incorporation of astaxanthin in nanoemulsion was performed and checked using high performance liquid chromatography (HPLC), freeze-fracture scanning electron microscope (FF-SEM). Physical stability of nanoemulsion was not significantly changed during storage at both light and thermal condition for a month with zeta potential value of -41 mV meaning stable colloid.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.102-107
• /
• 2019

Anionic surfactants were synthesized by using an sarcosine, taurine and fatty alcohol with varying the carbon chain length. The structure of synthesized surfactants was confirmed by $^1H$ NMR analysis. The critical micelle concentration of the synthetic anionic surfactant was $10^{-2}{\sim}10^{-4}mol/L$ and the surface tension value at the critical micelle concentration was between 21 and 39 mN/m. It was confirmed by the Ross-Miles method that the synthetic surfactant with the carbon chain of 12 showed a good foaming power and stability. In addition, the surfactant using the sacosine was found to have a good affinity in soybean oil while that using taurine in benzene. The physical properties of synthesized surfactants were determined by measuring the critical micelle concentration, foaming power and emulsifying stability.

• Korean journal of food and cookery science
• /
• v.7 no.2
• /
• pp.97-104
• /
• 1991

This study was carried out in order to study the protein functionality such as foaming and emulsifying properties by succinylation of peanut protein isolates. Succinylated and unsuccinylated peanut protein isolate was tested for to find out the effect of pH, heat treatment and sodium chloride concentration on the solubility, foam expansion, foam stability, emulsion capacity and emulsion stability. The results are summarized as follows; 1. Succinylation enhanced the solubility of peanut protein isotate (PPI). The solubility of succinylated PPI markedly increased at pH 4.5. When the protein solutions was heated, the solubility of succinylated PPI greatly increased than PPI at pH 3. With addition of NaCl, solubility of succinylated PPI increased at pH 7 and pH 9. 2. The foam expansion of PPI and succinylated PPI on pH was no difference between both proteins. Addition of NaCl and heat treatment caused steeply increased in foam expansion at pH 3. 3. The foam stability of PPI and succinylated PPI showed the lowest value at pH 4.5. When PPI and succinylated PPI was heated, foam stability of two proteins incensed at pH 3 and showed similar aspects between PPI and succinylated PPI. However, at pH 9 stability of succinylated PPI decreased by heat treatment over $60^{\circ}C$. 4. Emulsion capacity of succinylated PPI on pH was markedly increased and showed the highest value at pH 11. At pH 4.5 which is isoelectric point of PPI, emulsion capacity of PPI by succinylation improved than that of PPI. When succinylated PPI was heated, emulsion capacity was greatly increased at pH 2 and pH 7. With NaCl was added, emulsion capacity of succinylated PPI increased than that of PPI. 5. Emulsion stability of PPI and succinylated PPI was affected by pH and showed its highest value at pH 11. At pH 4.5, emulsion stability of succinylated PPI increased than that of PPI. Addition of NaCl and heat treatment caused slightly increased in emulsion stability of succinylated PPI.

• Korean Journal of Food Science and Technology
• /
• v.26 no.2
• /
• pp.110-116
• /
• 1994

In order to study the effects of enzyme modification on the physico-chemical and functional properties of myofibrillar protein prepared from the frozen sardine, Sardinops melanostica, the protein was hydrolyzed with pepsin under the enzyme-substrate ratio 1:100 at $37^{\circ}C$ and pH 1.65 for 1, 4, 8, 12, and 24 hr, respectively. The properties of pepsin-modified sardine myofibriliar protein were determined. The extents of proteolysis with pepsin as a fuction of time was showed a typical enzyme hydorlysis curve with an initial region of 4 hour period followed by plateau region. The SDS-acrylamide slab gel electrophoresis patterns of pepsin-modified proteins showed mainly disappearances of minor protein bands, but no changes of main protein bands. The gel filtration patterns through Sephadex G-75 of sardine myofibrillar protein showed two big peaks and three small peaks. All the small peaks were disappearanced by proteolysis with pepsin in one hour. and during the period of proteolysis the fast big peak became gradually smaller and the late big peak eluted more slowly. By proteolysis, the emulsifying activity and emulsifying capacity of sardine myofibrillar protein were all decreased. The effects of pepsin-modification on emulsifying capacity were greater than those on emulsifying activity of protein. The aeration capacity of the protein was increased about 1.9 folds and the foam stability decreased to 0.6 folds of control by pepsin-modification. The pepsin-modified sardine myofibrillar proteins showed about 0.6 folds of heat coagulation and 1.4 folds of viscosity of control. The pH dependence of solubilities of sardine myofibrillar protein showed two isoelectric areas of pH 5 and 9. The pepsin-modified protein showed more clear pH dependences at the early stage but not at the late stage of proteolysis.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.545-554
• /
• 2017

This study is concerned with the stability of liquid crystal forming emulsifier with localized depend on change of pH using liquid crystal forming agent of advanced company. The liquid crystal emulsifying agent was localized using Sugar Crystal-LC (bio-tech Co., Ltd., Korea), and comparative samples were measured by using Nikkomulese-LC (Nikko Camicarls, Japan) and Alacel-LC (Croda Camicarls, UK). Liquid crystal formation was confirmed microscopically to show the formation of liquid crystal structure at acidic (pH=4.2), neutral (pH=7.0) and alkaline (pH=11.7). The particles of the liquid crystal were observed with a polarizing microscope according to the stirring speed. The stirring time was all the same for 3 minutes with a homo-mixer, and the stirring speed was increased to 2500 rpm, 3500 rpm and 4500 rpm to observe the liquid crystal state. As a result, it was found that the Korean surfactant was more stable and clear liquid crystal structure was formed than the two foreign acids. In the case of the UK in acid zone, the emulsion particle size was uniform and unstable. In the case of Japanese surfactant, it has similar structure and performance to those of localized Korean. It was found that Korean surfactant had superior emulsifying performance in acid zone compared with foreign products. It is possible to develop various formulations such as liquid crystal cream, lotion, eye cream, etc. using Sugar Crystal-LC emulsifier as an application cosmetic field, and it is expected that it can be widely applied as emulsifying technology for skin care external application in the pharmaceutical industry and the pharmaceutical industry as well as the cosmetics industry.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.4
• /
• pp.273-280
• /
• 2021

The water resistance is important factor for sunscreen formulations. Generally a sunscreen cream was formulated by a water-in-oil (W/O) emulsion. In the W/O emulsion system, silicone oils are added to improve the texture of formulations. Silicone oils have low compatibility with organic sunscreen agent, causing problems with the stability in emulsion. In this study, the compatibility between various oils in the W/O emulsion was derived numerically using Hansen solubility parameter (HSP) at first. HSP is represented a dispersion degree, a polarity, and a hydrgen bond in a composition. In this study, various emulsions were prepared according to the types of oils with different HSP values and then monitored by a viscosity and morphology according to the time and temperature. The HSP values of components and the experimental results have similar activities for the stability of emulsions. HSP made it easy to select oil with high compatibility. When the compatibility of the oil phase in the W/O emulsion was high, the viscosity change over time was small. The stability was improved under the freeze-thaw cycle (-15 ℃ ~ 45 ℃). In the future, if the composition of the ingredients is optimized through HSP, it is expected that it will be helpful in the development of W/O type sunscreen formulations that are excellent in use and stability.