• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.6
• /
• pp.694-706
• /
• 2017

This study evaluated the protein recovery, functional properties and biological activity of isolate processed water (IPW) generated in the preparation of protein isolates from fish roes (BH, bastard halibut Paralichthys olivaceus; ST, skipjack tuna Katsuwonus pelamis; YT, yellowfin tuna Thunnus albacares) by an isoelectric solubilization and precipitation process. The IPWs contained 2.7-5.4 mg/mL of protein, and the protein losses were 8-21% (P<0.05). The form capacity of IPW-3 for BH and ST, and IPW-4 for YT was 155, 194, and 164%, respectively. The emulsifying activity index ($27-43m^2/g$) of the YT-IPWs was the strongest, followed by ST ($7-29m^2/g$) and BH ($10-19m^2/g$). The 2,2-diphenyl-1-picrylhydrazyl scavenging activities of IPW-1 and -3 were higher than those of IPW-2 and -4. The 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid scavenging activity ($IC_{50}$, mg/mL) of IPW-2 and -4 was 0.03 mg/mL for BH, 0.04-0.08 mg/mL for ST, and 0.04-0.07 mg/mL for YT. BH IPW-3 had the strongest reducing power (0.41 mg/mL) and superoxide dismutase-like activity (1.68 mg/mL). The angiotensin-I converting enzyme inhibitory activity of IPW-3 was the highest for ST (1.52 mg/mL), followed by BH and YT. The common predominant amino acids in the IPWs were the essential amino acids Val, Leu, Lys, and Arg and the non-essential amino acids Ser, Glu, and Ala.

• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.43-51
• /
• 1993

Buckwheat protein isolate was tested for the effects of pH, addition of sodium chloride and heat treatment on solubility, emulsion capacities, emulsion stability, surface hydrophobicity, foam capacities and foam stability. The solubility of buckwheat protein isolate was affected by pH and showed the lowest value at pH 4.5, the isoelectric point of buckwheat protein isolate. The solubility significantly as the pH value reached closer to either ends of the pH, i.e., pH 1.0 and 11.0. The effects of NaCl concentration on solubility were as follows; at pH 2.0, the solubility significantly decreased when NaCl was added; at pH 4.5, it increased above 0.6 M; at pH 7.0 it increased; and at pH 9.0 it decreased. The solubility increased above $80^{\circ}C$, at all pH ranges. The emulsion capacity was the lowest at pH 4.5. It significantly increased as the pH approached higher acidic or alkalic regions. At pH 2.0, when NaCl was added, the emulsion capacity decreased, but it increased at pH 4.5 and showed the maximum value at pH 7.0 and 9.0 with 0.6 M and 0.8 M NaCl concentrations. Upon heating, the emulsion capacity decreased at acidic pH's but was maximised at pH 7.0 and 9.0 on $60^{\circ}C$ heat treatment. The emulsion stability was the lowest at pH 4.5 but increased with heat treatment. At acidic pH, the emulsion stability increased with the increase in NaCl concentration but decreased at pH 7.0 and 9.0. Generally, at other pH ranges, the emulsion stability was decreased with increased heating temperature. The surface hydrophobicity showed the highest value at pH 2.0 and the lowest value at pH 11.0. As NaCl concentrationed, the surface hydrophobicity decreased at acidic pH. The NaCl concentration had no significant effects on surface hydrophobicity at pH 7.0, 9.0 except for the highest value observed at 0.8 M and 0.4 M. At all pH ranges, the surface hydrophobicity was increased, when the temperature increased. The foam capacity decreased, with increased in pH value. At acidic pH, the foam capacity was decreased with the increased in NaCl concentration. The highest value was observed upon adding 0.2 M or 0.4 M NaCl at pH 7.0 and 9.0. Heat treatments of $60^{\circ}C$ and $40^{\circ}C$ showed the highest foam capacity values at pH 2.0 and 4.5, respectively. At pH 7.0 and 9.0, the foam capacity decreased with the increased in temperature. The foam stability was not significantly related to different pH values. The addition of 0.4 M NaCl at pH 2.0, 7.0 and 9.0 showed the highest stability and the addition of 1.0 M at pH 4.5 showed the lowest. The higher the heating temperature, the lower the foam stability at pH 2.0 and 9.0. However, the foam stability increased at pH 4.5 and 7.0 before reaching $80^{\circ}C$.

• Applied Biological Chemistry
• /
• v.47 no.2
• /
• pp.170-175
• /
• 2004

In this paper we studied about Bacillus sp. TBM40-3 producing biosurfactants. The strains were isolated from Taeback Mountain soil and identified as Bacillus sp. by l6S rDNA nucleotides sequence analysis. The TBM40-3 was gram-positive and rod-shaped as observed by field emission scanning microscopy. After the cultivation TBM40-3 in LB broth for 90 h and the surface tension of supernatant was decreased to 29 mN/m. Emulsification activity and stability of crude biosurfactant was measured by using water-immiscible hydrocarbons and oil as substrate. Maximum emulsification activity and stability was obtained from soybean oil. Also, we confirmed that the TBM40-3 producing biosurfactant had an effect on crude oil while showing a superior effect as compared to chemically synthesized surfactants (SDS, Span85, Tween40, Triton X-100). As a result, the Bacillus sp. TBM40-3 producing biosurfactant had potent properties as an emulsifying agent and an emulsion stabilizing agent.

• Journal of Food Hygiene and Safety
• /
• v.36 no.6
• /
• pp.474-480
• /
• 2021

Sodium alginate is the sodium salt of alginic acid, commonly used as a food additive for stabilizing, thickening, and emulsifying properties. A relatively simple and universal analysis method is used to study sodium alginate due to the complex pretreatment process and extended analysis time required during the quantitative method. As for the equipment, HPLC-UVD and Unison US-Phenyl column were used for analysis. For the pretreatment condition, a shaking apparatus was used for extraction at 150 rpm for 180 minutes at room temperature. The calibration curve made from the standard sodium alginate solution in 5 concentration ranges showed that the linearity (R²) is 0.9999 on average. LOD and LOQ showed 3.96 mg/kg and 12.0 mg/kg, respectively. Furthermore, the average intraday and inter-day accuracy (%) and precision (RSD%) were 98.47-103.74% and 1.69-3.08% for seaweed jelly noodle samples and 99.95-105.76% and 0.59-3.63% for sherbet samples, respectively. The relative uncertainty value was appropriate for the CODEX standard with 1.5-7.9%. To evaluate the applicability of the method developed in this study, the sodium alginate concentrations of 103 products were quantified. The result showed that the detection rate is highest from starch vermicelli and instant fried noodles to sugar processed products.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.1 s.55
• /
• pp.45-51
• /
• 2006

In the field of makeup cosmetics, especially, powder-based foundations such as two-way cake, pact and face powder, the quality of which is known to be strongly influenced by the properties of powder, surface treatment technology is widely used as a method to improve the various characteristics of powder texture, wear properties, dispersion ability and so on. The two-way cake or pressed-powder foundation is one of the familiar makeup products in Asian market for deep covering and finishing purpose. In spite of the relent progress in surface modification method such as composition of powders with different characteristics and application of a diversity of coating ingredient (metal soap, amino acid, silicone and fluorine), this product possess a technical difficulty to enhance both of the adhesion power and spreadability on the skin in addition to potential claim of consumer about heavy or thick feeling. This article is covering the preparation and coating method of nano-vesicle that mimic the double-layered lipid lamellar structure existing between the corneocytes of the stratum corneum in the skin for the purpose of improving both of two important physical characteristic of two-way cake, spreadability and adhering force to skin, and obtining better affinity to skin. Nano-vesicle was prepared using the high-pressure emulsifying process of lecithin, pseudo ceramide, butylene glycol and tocopheryl acetate. This nano-sized emulsion was added to powder-dispersed aqueous phase together with bivalent metal salt solution and then the filtering and drying procedure was followed to yield the nano-vesicle coated powder. The amount of nano-vesicle coated on the powder was able to regulated by the concentration of metal salt and this novel powder showed the lower friction coefficient, more uniform condition of application and higher adhesive powder comparing with the alkyl silane treated powder from the test result of spreadability and wear properties using friction meter and air jet method. Two-wav cake containing newly developed coated powder with nano-vesicle showed the similar advantages in the frictional and adhesive characteristics.

• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.151-155
• /
• 1995

In order to understand some physicochemical and functional properties of whey powders, imported and domestic products were analyzed. The pH values of imported whey powder solution were $5.85{\sim}6.33$, while those of domestic $5.70{\sim}6.43$. The titratable acidity values of imported whey powders were $0.11{\sim}0.18%$, while those of domestic products $0.10{\sim}0.24%$. The contents of moisture, crude ash, protein, lipid and lactose of the imported whey powder were $1.31{\sim}2.10%,\;7.37{\sim}7.49%,\;11.54{\sim}12.14%,\;0.82{\sim}1.40%\;and\;64.43{\sim}72.66%$, respectively, while those of domestic products $2.11{\sim}2.81%,\;5.39{\sim}8.03%,\;10.41{\sim}20.03%,\;1.88{\sim}2.54%\;and\;54.32{\sim}68.42%$, respectively. The active SH group contents of imported whey powders were $0.36{\sim}0.82{\mu}M/g$, while those of domestic products ranged $0.29{\sim}4.83{\mu}M/g$. The protein solubility of imported whey powders were $54.50{\sim}82.26%$, while that of domestic products $26.93{\sim}68.44%$. The emulsifying capacity and the emulsion stability of imported whey powders were $5.83{\sim}12.53cm^{2}/g$ and $10.24{\sim}12.45%$, respectively, while those of domestic products $6.19{\sim}11.28cm^{2}/g$ and $7.28{\sim}9.93%$, respectively. The foam overrun and stability of imported whey powders were $4.34{\sim}5.54%$ and $0.49{\sim}0.66%$, respectively, while those of domestic products $2.56{\sim}4.24%$ and $0.15{\sim}0.35%$, respectively.

• Korean Journal of Poultry Science
• /
• v.7 no.2
• /
• pp.37-46
• /
• 1980

Hand deboned and mechanically deboned chicken meat were produced from domestic broilers and spent layers. Meat yield, chemical composition, functional characteristics, stability during storage, and microbiological properties were investigated Chicken patties and frankfurters were also manufactured by varying the relative proportion of MDCM to HDCM as raw materials, ana their palatability, shelf-life and textural properties were evaluated. The obtained results were as follows: 1) 35% of carcass wt was recovered as HDCM and 45% as MDCM, total meat yield reaching 80% of carcass wt. 2) Moisture, protein, fat, ash and Ca content of MDCM were 65, 12, 20, 1.7 and 0.2-0.4%,respectively. MDCM was higher in fat, ash and Ca, but significantly lower in moisture and protein. Total pigment content of MDCM was 2.5 times higher than that of HDCD such high content being attributed to the increased inclusion of hemoglobin. 3) The emulsifying capacity (ES) of MOCM per g meat was only 70% that of HDCM. but when ES was expressed on unit g of protein basis MDCM showed even higher ES than HDCM primarily due to tile higher proportion of salt soluble protein fraction. 4) Since the TBA values of MDCM increased rapidly after 4 weeks of frozen storage at -20$^{\circ}C$, the maximum possible storage period of MDCM is estimated to be about 4 weeks. 5) Total microbial counts of MDCM was approximately 1.8${\times}$10$\^$6/g/, showing no great difference from HDCM or red meat. 6) Chicken patty containing MDCM showed gradual increase in TBA value during frozen storage, but its storage up to 8 weeks presented no problems in flavor stability. 7) Color score an4 total palatability of chicken Patty were best for the product containing 30% MDCM. It was also concluded that MDCM can be included in the patties up to 50% of total meat with good results, but more than 70% was not recommended 8) The formulation of MDCM up to 50% in frankfurter gave quite satisfactory acceptability and textural properties comparable to frankfurter made of 100% MDCM, but the inclusion of more than 70% MDCM was not recommended 9) The TBA value of frankfurter containing MDCM did not increase to any great extent until 4 weeks of storage at 4$^{\circ}C$, indicating no unique problems in flavor instability compared to regular frankfurter. 10) It was concluded that processed meat products such as patties and frankfurters containing MDCM up to 30-50% of total meat ingredients gave satisfactory results in color, texture and palatability, comparable to regular products.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.345-352
• /
• 1985

To characterize the protein from arrowroot leaf, proteins were extracted and separated from arrowroot leaf, then its amino acid composition and functional properties were studied. Protein in arrowroot leaf was consisted of 18.5% albumin, 33.5% globulin, 34.0% glutelin, 6.2% protamine and 7.8% insoluble residues. The rates of precipitation of proteins which extracted with water, 1M NaCl, and 0.015N NaOH as a solvent were 84.7% (at pH 3.0), 76.4% (at pH 2.5) and 86.4% (at pH 4.0), respectively. The extracted proteins were separated up to about 90% by organic solvents such as ethanol and acetone at 80% concentration, Composition of arrowroot leaf protein concentrates were: $1{\sim}2%$ moisture, $59{\sim}67%$ protein, $4{\sim}8%$ ash and $5{\sim}6%$ (dialyzed concentrates) or $1{\sim}2%$ (acetone-treated ones) lipid. Main amino acids of the concentrates were aspartic acid, glutamic acid and glycine. Solubility profile of the concentrates according to pH was typical. The minimum solubility (below pH 5.0) of acetone extracted protein concentrates was lower than that of unextracted ones, whereas the reverse was true for pH value above this region. Bulk density, water and fat absorption of the concentrates were attributable to correlation to the treatment of acetone. And the bulk density of the concentrates was negatively correlative to both water and fat absorption. Emulsifying and foaming properties were not varied with the treatment of acetone.

• Korean journal of food and cookery science
• /
• v.11 no.1
• /
• pp.69-76
• /
• 1995

This study was concentrated on the subject of chou formation and physicochemical characteristics on medium flour mixed with 0, 25, 50, 75, 100% of rice flour in order to clarify the possibility to substitute rice flour for wheat flour on chou preparation. The water holding capacity, swelling power, and maximum viscosity were higher in rice flour than those in medium flour but the initial pasting temperature was equal to 65$^{\circ}C$ in the two flour groups. The ratio of setback during cooling became 0.94 in the rice flour and 1.14 in the medium flour. So, the rice flour showed a slow tendency during gel formation as compared with the medium flour. The volumes of the rice choux were ranged from 80.0% to 89.0% according to the mixing ratio of medium flour as compared with that of the chou of wheat flour. But, the choux formation were increased as much as 108.8% out the paste added gelation of glutinous substance and 124.4% at the paste added Span20 of emulsifier compared to the non-addition treatment. The paste of rice flour added gelatin and Span20 showed better dispersion of components, especially, the small granules of lipid were fairly or plentifully dispersed in the paste added Span20 due to emulsifying activity. In sensory evaluation, the chou of l00% rice flour was inferior to that of medium flour on cavity-forming but the choux of wheat flour mixed with 25%, 50%, and 75% of rice flour were equal or superior to that of medium flour on all characteristics tested such as appearance, surface color, cavity-forming, chewiness, and taste. There were no significant differences on the cavity-forming expansion and taste between choux of rice flour and wheat flour Therefore, the results of this study made conclusion that rice flour would be substituted for wheat flour on the chou preparation.

• Korean Journal of Food Science and Technology
• /
• v.13 no.3
• /
• pp.171-175
• /
• 1981

Hand deboned and mechanically deboned chicken meat were produced from domestic broilers and spent layers. Meat yield, chemical composition, functional characteristics, storage stability and microbiogical properties were investigated. The results obtained were as follows: 1. 35% of carcass freight was recovered primarily as hand deboned chicken meat (HDM) and 45% secondarily as mechanically deboned chicken meat(MDM), total meat yield reaching 80% of carcass weight. 2. Moisture, protein, fat. ash and calcium content of MDM were 65, 12, 20, 1.7 and $0.2{\sim}0.4%$, respectively MDM was higher than HDM in fat, ash and calcium, but significantly lower in moisture and protein Total pigment content of MDM was 2.5 times higher than that of HDM, such high content being attributed to the increased inclusion of hemoglobin during the mechanical masceration of carcass in the deboning process. 3. The emulsifying capacity (ES) of MDM per g meat was only 70% that of HDM, but when ES was expressed on unit g of protein basis MDM showed even higher ES than HDM primarily due to the higher proportion of salt soluble protein fraction of MDM. 4. Since the TBA value of MDM increased rapidly after 4 weeks of frozen storage at $-20^{\circ}C$, the maximum possible storage period of MDM is estimated to be about 4 weeks. 5. Total microbial counts of MDM was approximately $1.8{\times}10\;cells/g$ showing no great difference from HDM or red meat.