• Journal of Life Science
• /
• v.17 no.7 s.87
• /
• pp.944-947
• /
• 2007

Bacillus sp.LPO3 (producing emulsifying substances such as bio-surfactant) was used as a bio-control agent to degrade hydrocarbon (gasoline in oil spilled crop soil). The soil (brought from fertilizer store)was mixed with gasoline-spilled soil (made with Diatomaceous Earth, Sigma.U.S.A). The study was conducted for a period of 13 days, 13 days during which bacterial growth, hydrocarbon degradation and growth parameters of Bacillus sp.LP03 including shoot and root length were studied. We found that the effective of bacterial producing substance might bio-surfactants let the plants survive even more promote the growth of shoot and root length and showed antifungal activity against gray mold. Without the bacteria, they couldn't grow in oil-spilled soil not even survive. According to the results of the above experiments, we can see with following results, hydrocarbon in gasoline was reduced, day by day, then RNA dot blotting was done and it fit the results we had done. Finally, this Bacteria(producing bio-surfactant) were found to have effective bio-control agent for cropping in oil spilled soil and infected by gray mold.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.10
• /
• pp.1700-1703
• /
• 2007

Microorganisms capable of degrading crude oil were isolated and grown in soybean oil as a sole carbon source. The microbial cultures were used to control green peach aphids in vitro. Approximately 60% mortality of aphids was observed when the cultures were applied alone onto aphids. To examine the cultures as a pesticide formulation mixture, the cultures were combined with a low dose of the insecticide imidacloprid (one-fourth dose of recommended field-application rate) and applied onto aphids. The cultures enhanced significantly the insecticidal effectiveness of imidacloprid, which was higher than imidacloprid alone applied at the low dose. The isolated microorganisms exhibited high emulsifying index values and decreased surface tension values after being grown in soybean oil media. GC/MS analyses showed that microorganisms degraded soybean oil to fatty acids. The cultures were suggested to play the roles of wetting, spreading, and sticking agents to improve the effectiveness of imidacloprid. This is the first report on the control of aphids by using oil-degrading microbial cultures.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.478-485
• /
• 2014

This study is to form the self assembly of cubic crystalline phase to penetrate into the skin epidermis. The various performance synthesized diglyceryl phytylacetate (DGPA) having hydroxyl group (-OH) and 4 methyl chains with phytyl group was carried out as an amphoteric lipid such as emulsifying power, self assembly. Emulsifying activity of DGPA was very stabilized on only 1% of small content, it could make a W/O emulsion containing high internal phase incorporated with water. Cubic liquid crystal structure with DGPA on three-phase diagram was formed, when mixed DGPA, dimethicone (2CS), and water. Through three-phase diagram forming the cubic liquid crystal area, hexagonal structure zone, and mixing water phase and hexagonal structure area, reversed micelle area were respectively certified. Its structure was proved by the SAXS (small angled x-ray scattering) analysis. As an application, formation of cubosome containing 10% of magnesium ascorbylphosphate and 5% of pyridoxine tris-hexyldecanoate was encapsulated. Occlusive effect of cubosome had above 1.7 times better than reversed micelle. From using poloxamer of dispersing agent, phase structure recovered from W/O emulsion to cubic liquid crystal phase when storage in $33^{\circ}C$ incubator. Therefore, our this study is expected to be as epidermal-dermal skin absorbers in skin care cosmetics and pharmaceuticals industries as raw materials to form a cubic crystal phase through a more in-depth research to DGPA having amphoteric lipid property.

• Food Science and Biotechnology
• /
• v.17 no.3
• /
• pp.587-593
• /
• 2008

Microbial exopolysaccharide (EPS) is a biothickener that can be added to a wide variety of food products, where it serves as a viscosifying, stabilizing, emulsifying, and gelling agent. The objective of this study was to investigate the optimum conditions of pH, incubation temperature, and whey protein concentration (WPC) for EPS production by Lactobacillus rhamnosus ATCC 9595. We found that maximal EPS production was achieved at a pH of 5.5 and temperature of $37^{\circ}C$. At the same fermentation conditions, EPS production was affected by the addition of L. rhamnosus GG (a weak-EPS producer). After growth for 24 hr, total EPS production was $583{\pm}15.4mg/L$ in the single culture system, and $865{\pm}22.6\;mg/L$ in the co-culture system with L. rhamnosus GG. Based on the presence of WPC, EPS production dramatically increased from $583{\pm}15.4$ (under no WPC supplementation) to $1,011{\pm}14.7\;mg/L$ (under supplementation with 1.0% WPC). These results suggest that WPC supplementation and the co-culture systems coupled with small portions of weak-EPS producing strain can play an important role in the enhancement of EPS production.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.173-180
• /
• 2013

This paper is to investigate an effect of waste cooking oil(WCO) on the engineering properties and durability of high volume admixture concrete. Fly ash with 30% and blast furnace slag with 60% were incorporated in OPC to fabricate high volume admixture concrete with 0.5 of W/B. Emulsified refining cooking oil(ERCO) was made by mixing WCO and emulsifying agent to improve fluidity. ERCO was replaced by cement from 0.25 to 1.0%. As results, the increase of ERCO resulted in decrease of slump and air contents. For compressive strength, the use of ERCO led to decrease the compressive strength at 28 days, while it had similar strength or much higher strength than plain concrete at 180 days. Resistance to carbonation and chloride penetration was improved with the increase of ERCO contents due to decreased pore distribution by saponification between ERCO and concrete, while freeze-thaw resistance was degraded due to air loss.

• Macromolecular Research
• /
• v.17 no.2
• /
• pp.128-132
• /
• 2009

Fucoidan, a sulfated polysaccharide derived from brown seaweed, is an important material valued for its various biological functions, including anti-coagulation, anti-aging, and immune system support. In this study, we examined the potential of fucoidan as a novel emulsifying agent in BSA (bovine serum albumin)-stabilized emulsion at a neutral pH. We measured the dispersed oil-droplet size, surface zeta-potential and creaming formation of 0.5 wt% BSA emulsion (20 wt% oil traction) in the absence and presence of fucoidan. The average particle size and zeta-potential value were 625.4 nm and -30.91 mV in only BSA-stabilized emulsion and 745.2 nm and -44.2 mV in 1.0 wt% fucoidan-added BSA emulsion, respectively. This result suggested that some positive charges of the BSA molecules interacted with the negative charges of fucoidan to inhibit the flocculation among the oil droplets. The creaming rate calculated from the backscattering data measured by Turbiscan dramatically decreased in 1.0 wt% fucoidan-added BSA emulsion during storage. Accordingly, the repulsion forces induced among the oil particles coated with 1.0 wt% fucoidan in emulsion solution resulted in significantly increased emulsion stability. The turbidity of the BSA-stabilized emulsion at 500 nm decreased during five days of storage. However, the fucoidan-added BSA emulsion exhibited a higher value of turbidity than the BSA-stabilized emulsion did. In conclusion, an anionic sulfated fucoidan lowered the surface zeta-potential of BSA-coated oil droplets via the electrostatic interaction, and subsequently inhibited the flocculation among the oil droplets, thereby clearly minimizing the creaming and phase separation of the emulsion.

• Korean Journal of Microbiology
• /
• v.33 no.2
• /
• pp.157-162
• /
• 1997

Recently the bioremediation technology has been widely used to recover the oil contaminated environments The application of bioremediation agents to oil polluted environments became common and thus many kinds of commercial products were imported into domestic market. In Korea, howcver. the standardization of bioremediation products quality is not yet established and results of efficacy test .ire scarce. In this study five oil spill bioremediation commercial products including microbial inoculants and en'cyme agents are tested for the oil degradation rate. From the results most products shows the strong oil emulsifying phenomena due to the contained chemical oil dispersant and the low oil degradation rate. Product D inhibited the oil degradability of microorganisms even in the natural sea water. From these results it could be concluded that in the near future the laboratory protocol and standardization of products quality for bioremediarion agents should be prepared to activate the effective application of bioremediation technology in Korea.

• Korean journal of food and cookery science
• /
• v.21 no.6 s.90
• /
• pp.823-828
• /
• 2005

To lower the calories of buckwheat noodle, which is good for reducing obesity and for Preventing adult disease, glucomannan and flour containing resistant starch(RS) were used during the noodle making Process. Compared with raw noodle, this buckwheat raw noodle had $30\%$ fewer calories. This low caloric buckwheat noodle was coated with olive oil which is reputed as well-being food to prevent soddening to make instant type buckwheat noodle. Its shelf-life was extended to 90 days under normal temperature($35^{\circ}C$I). Among four noodle samples with different combinations of raw materials, the best was made of flour with RS formula flour, buckwheat flour, glucomannan, activated gluten, and emulsifying agent. The one without salt had better quality. Among 6 kinds of packing materials, OPP/Al/PE composite level film demonstrated the best quality packing materials.

• Food Science of Animal Resources
• /
• v.39 no.4
• /
• pp.541-554
• /
• 2019

Processed cheeses (PCs) were made under varying cooking pH values (5.3, 5.4, 5.5, and 5.6) using a processed cheese cooker. Along with emulsifying salts (2.5%), distilled water, NaCl (2%) and a colouring agent under these cooking pH values, the PC samples made with either 100% fresh curd and rennet casein coded processed cheese control ($PC_C$) as control or ~70% fresh curd-~30% traditional village cheese coded processed cheese with village cheese ($PC_V$). The main aim of this study was to determine the effect of the varying cooking pH values on the textural properties for the PCv samples compared with the control sample during 90 days of storage. Chemical and textural properties of all PC samples were investigated over time. The chemical compositions of the PC samples (dry matter and ash) increased at d 90 of storage significantly, due to 1-d ripening of all PC samples at ambient temperature in terms of the manufacturing protocol of the cheese. The textural properties of the PC samples were altered by the varying cooking pH values. It may propose that the interactions of the proteins at the cooking pH values during processing and biochemical mechanisms in the cheese systems could likely affect the texture of the PC samples over time. Hardness, gumminess and chewiness values of all PC samples also increased over time (p<0.05). This study is also to give some knowledge on the design of PC manufacture to cheese makers, and a marketing opportunity to local cheese makers who individually make a traditional village cheese in Turkey.

• Applied Biological Chemistry
• /
• v.47 no.2
• /
• pp.170-175
• /
• 2004

In this paper we studied about Bacillus sp. TBM40-3 producing biosurfactants. The strains were isolated from Taeback Mountain soil and identified as Bacillus sp. by l6S rDNA nucleotides sequence analysis. The TBM40-3 was gram-positive and rod-shaped as observed by field emission scanning microscopy. After the cultivation TBM40-3 in LB broth for 90 h and the surface tension of supernatant was decreased to 29 mN/m. Emulsification activity and stability of crude biosurfactant was measured by using water-immiscible hydrocarbons and oil as substrate. Maximum emulsification activity and stability was obtained from soybean oil. Also, we confirmed that the TBM40-3 producing biosurfactant had an effect on crude oil while showing a superior effect as compared to chemically synthesized surfactants (SDS, Span85, Tween40, Triton X-100). As a result, the Bacillus sp. TBM40-3 producing biosurfactant had potent properties as an emulsifying agent and an emulsion stabilizing agent.