• 한국축산식품학회지
• /
• 제35권5호
• /
• pp.630-637
• /
• 2015

In the dairy industry, natural plant-based powders are widely used to develop flavor and functionality. However, most of these ingredients are water-insoluble; therefore, emulsification is essential. In this study, the efficacy of high pressure homogenization (HPH) on natural plant (chocolate or vanilla)-based model emulsions was investigated. The particle size, electrical conductivity, Brix, pH, and color were analyzed after HPH. HPH significantly decreased the particle size of chocolate-based emulsions as a function of elevated pressures (20-100 MPa). HPH decreased the mean particle size of chocolate-based emulsions from 29.01 μm to 5.12 μm, and that of vanilla-based emulsions from 4.18 μm to 2.44 μm. Electrical conductivity increased as a function of the elevated pressures after HPH, for both chocolate- and vanilla-based model emulsions. HPH at 100 MPa increased the electrical conductivity of chocolate-based model emulsions from 0.570 S/m to 0.680 S/m, and that of vanilla-based model emulsions from 0.573 S/m to 0.601 S/m. Increased electrical conductivity would be attributed to colloidal phase modification and dispersion of oil globules. Brix of both chocolate- and vanilla-based model emulsions gradually increased as a function of the HPH pressure. Thus, HPH increased the solubility of plant-based powders by decreasing the particle size. This study demonstrated the potential use of HPH for enhancing the emulsification process and stability of the natural plant powders for applications with dairy products.

• 한국식품조리과학회지
• /
• 제26권5호
• /
• pp.537-544
• /
• 2010

This study was conducted to find an efficient use for mulberry fruit powder (MFP). MFP was added to salad dressing products at concentrations of 0.25, 0.5, 0.75, 1%, and pH, total acidity, viscosity, color, and emulsion stability were measured and sensory evaluation was conducted. There were no significant differences among salad dressing samples regarding pH, total acidity and moisture content. Salad dressing made with 0.5% MFP showed significantly higher viscosity during storage and made the most stable emulsion. For color, the control sample had the highest L and b values, and these values decreased significantly as the amount of MFP in the sample increased. The control salad dressing had the lowest a value of -3.26, and this value increased significantly as the amount of MFP in the sample increased. Sensory evaluation of salad dressing was performed by a trained consumer panel. The flavor intensity increased as the amount of MFP increased in the salad dressing samples. Sweetness was rated significantly higher as the amount of MFP increased in the samples. The control sample had the lowest sourness and off-flavor, but there was no significant difference compared to the samples containing MFP.

• 대한화장품학회지
• /
• 제40권3호
• /
• pp.221-226
• /
• 2014

본 연구에서는 인지질-비이온계면활성제의 혼합계면활성제를 이용하여 옥틸도데실미리스테이트를 조성상전이 유화법으로 O/W 타입 나노에멀젼을 제조하였다. 혼합 계면활성제와 오일의 농도 비가 1 : 1 정도의 매우 좁은 영역에서 나노에멀젼이 형성되었다. 비이온계면활성제로만 제조된 나노에멀젼과는 달리 전상점 이후에 수용액상을 첨가함에 따라 에멀젼의 입자 크기가 감소하였다. 제조된 나노에멀젼은 실온에서 한 달 이상 안정하였다. 인지질을 함유하고 저에너지 유화법으로 제조된 나노에멀젼 제형은 화장품의 기재로서 널리 사용될 수 있다.

• 한국축산식품학회지
• /
• 제34권6호
• /
• pp.808-814
• /
• 2014

This study investigated the effect of gum arabic (GA) combined with microbial transglutaminase (TG) on the functional properties of porcine myofibrillar protein (MP). As an indicator of functional property, heat-set gel and emulsion characteristics of MP treated with GA and/or TG were explored under varying NaCl concentrations (0.1-0.6 M). The GA improved thermal gelling ability of MP during thermal processing and after cooling, and concomitantly added TG assisted the formation of viscoelastic MP gel formation. Meanwhile, the addition of GA decreased cooking yield of MP gel at 0.6 M NaCl concentration, and the yield was further decreased by TG addition, mainly attributed by enhancement of protein-protein interactions. Emulsion characteristics indicated that GA had emulsifying ability and the addition of GA increased the emulsification activity index (EAI) of MP-stabilized emulsion. However, GA showed a negative effect on emulsion stability, particularly great drop in the emulsion stability index (ESI) was found in GA treatment at 0.6 M NaCl. Consequently, the results indicated that GA had a potential advantage to form a viscoelastic MP gel. For the practical aspect, the application of GA in meat processing had to be limited to the purposes of texture enhancer such as restructured products, but not low-salt products and emulsion-type meat products.

• 한국인쇄학회지
• /
• 제24권1호
• /
• pp.1-12
• /
• 2006

The rheological characteristics of an ink relate to its performance on the press and to the printing quality such as ink stability, transfer characteristics, mottle, squash, misting, dot gain, and so on. For lithographic print, the emulsification of ink is an important factor to determine the product. And also the rheological characteristics of the emulsified ink should be investigated. Thus, in this study, the effects of the changing molecular weight of rosin modified phenolic resin on the water-pickup ratio of neat inks were studied. And then rheological properties of neat inks and emulsified inks with changing molecular weight of rosin modified phenolic resin were analyzed by using rotational rheometer.

• 환경위생공학
• /
• 제11권3호
• /
• pp.69-77
• /
• 1996

The result of isolated and selected to the strain having the emulsifying activity from soil's strain the strain was identified as Candida genus. The strain was investigated with culture condition at pH culture temperature, flow rate of air, strring rate etc., and physicochemical properties of the biosurfactant were examined. The optimum composition of medium for a strain cultivation were obtained as follow : glucose ; 100g/L, yeast extract ; 10g/L, urea ; 1.0g/L, KH$_{2}$PO$_{4}$ ; 50mg/L, MgSO$_{4}$ ; 500mg/L, and the op condition of cultivation was as follow : pH ; 3.0, temperatlue ; 24$\circ $C, strring rate ; 40rpm. The maximum yield of biosurfactant was obtained by pH ; 3.0-3.5, and temperature ; 25$\circ $C. The degree of emulsification of syntesized biosurfactant was increased clearly by increasing concentration of biosurfactant and it's stability was maintained for a long time. The surface tension of biosurfactant was varied with pH, especially it was showed that the surface tension was high at acidic pH.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 The 4th Korea-Italy Workshop
• /
• pp.65-68
• /
• 2003

The paper discusses the use of stable emulsion, prepared by membrane emulsification technology, to improve the enantiocatalytic performance of immobilised lipase in multiphasic membrane reactors. The production of optical pure (S)-naproxen from racemic naproxen methyl ester has been used as model reaction system. The enzyme was immobilised in the sponge layer (shell side) of capillary polyamide membrane with 50 kDa cut-off, The O/W emulsion, containing the substrate in the organic dispersed phase, was fed to the enzyme membrane reactor from shell-to-lumen. The results evidenced that lipase maintained stable activity during all the operation time (more than 250 hours), showing an enantiomeric excess (96 $\pm$2%) comparable to the free enzyme (98 $\pm$ 1%) and much higher compared to similar lipase-loaded membrane reactors used in two-separate phase systems (90%). The study showed that immobilised enzymes can achieve high stability as well as high catalytic activity and enantioselectivity.

• 한국응용과학기술학회지
• /
• 제35권3호
• /
• pp.985-1001
• /
• 2018

W/O 에멀젼; 안정성; 유화제본 연구에서는 일반적으로 O/W 에멀젼에 비해 안정화가 어려운 W/O 에멀젼, 특히 유동성이 높은 저점도 W/O 에멀젼의 안정성 증진을 위하여 유화제, 전해질, 유화 안정화제, 겔화제 등을 적용한 다양한 실험을 수행하여 보았다. 그 결과 이번 실험에서는 Polyglyceryl-4 diisostearate/polyhydroxystearate/sebacate를 주 유화제로 하면서 PEG-30 dipolyhydroxystearate와 Cetyl PEG/PPG-10/1 dimethicone을 보조 유화제로 하는 유화 체계에, 전해질로 Sodium chloride를 0.5 %, 유화 안정화제로 Distearyldimonium chloride를 1 %, 유상 겔화제로 Glyceryl behenate/eicosadioate를 0.5 % 적용한 유화 입자도 작고 조밀하며 점도도 2,000 cps 이하로 일정하게 유지되는 안정한 저점도 W/O 에멀젼을 제조할 수가 있었다. 또한 상기와 같은 에멀젼 베이스에 무기 자외선 차단성분의 적용 실험을 통하여 안정성이 우수한 저점도 플루이드형 자외선 차단제품의 개발 가능성도 긍정적으로 검토할 수가 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제15권1호
• /
• pp.29-34
• /
• 2005

W/O/W (water-in-oil-in-water) type multiple emulsion was applied to improve the storage stability of an antagonistic microorganism, Burkholderia gladioli. Encapsulation of microorganism into a W/O/W emulsion was conducted by using a two-step emulsification method. W/O/W emulsion was prepared by the incorporation of B. gladioli into rapeseed oil and the addition of polyglycerin polyriconolate (PGPR) and castor oil polyoxyethylene (COG 25) as the primary and secondary emulsifier, respectively. Microcrystalline cellulose was used as an emulsion stabilizer. To evaluate the usefulness of W/O/W emulsion formulation as a microbial pesticide for controlling the bacterial wilt pathogen (Ralstonia solanacearum), the storage stability and antagonistic activity of emulsion formulation were tested in vitro. The storage stability test revealed that the viability of formulated cells in emulsion was higher than that of unformulated cells in culture broth. At $4^{\circ}C$, the viabilities of formulated cells and unformulated cells at the end of 20 weeks decreased to about 2 and 5 log cycles, respectively. At $37^{\circ}C$, the viability of formulated cells decreased to only 2 log cycles at the end of storage. On the other hand, the viable cells in culture broth were not detected after 13 weeks. In activity test, formulated cells in emulsion were more effective in inhibiting the growth of pathogen than unformulated cells in culture broth. Unformulated cells completely lost their antagonistic activity during storage under similar conditions. The W/O/W multiple emulsion formulation was shown to be useful as the novel liquid formulation for biological control.

• 공업화학
• /
• 제31권1호
• /
• pp.19-24
• /
• 2020

본 연구에서는 coconut oil과 Tween-Span계 혼합계면활성제를 사용하여 O/W 유화액을 제조하고 유화안정성을 향상시키기 위한 유화조건을 최적화하였다. 이를 위해 최적화과정은 CCD-RSM (central composite design model-response surface methodology)를 이용하였다. 계량인자로는 HLB (hydrophile-lipophilie balance) value, 혼합계면활성제 첨가량, 유화속도 등을 설정하였으며, 반응치로는 평균액적크기(MDS), 유화액의 유화안정도지수(ESI), 열적 불안정도지수(TII)를 설정하였다. CCD-RSM 분석결과 3가지 반응치를 동시에 만족하는 최적조건으로 HLB value (9.1), 혼합계면활성제 첨가량(8.7 wt.%), 유화속도(6,200.8 rpm)로 산출되었으며, CCD-RSM 분석예상값은 MDS (151.0 nm), 유화액의 ESI (99.86%), TII (3.17%)로 나타났다. 이 조건에서의 실제실험 결과 오차율은 3.5% 이하로 나타나 본 연구에서의 O/W 유화액 제조과정에 CCD-RSM 최적화 분석을 적용할 경우 비교적 높은 유의수준의 결과를 얻을 수 있었다.