• 공업화학
• /
• 제17권6호
• /
• pp.597-603
• /
• 2006

$XSiO_{2}{\cdot}YGeO_{2}$계 화합물과 $XSiO_{2}{\cdot}YNaO_{2}{\cdot}ZGeO_{2}$계 화합물을 제조하고 이들 화합물에서 $GeO_{2}$의 함량을 변화시켜 원적외선 방사율과 원적외선 방사에너지에 미치는 영향을 연구하였다. 제조된 시료의 특징은 TG-DTA, XRD, FT-IR spectrophotometer 그리고 FT-IR spectrometer에 의해 조사되었다. $XSiO_{2}{\cdot}YGeO_{2}$와 $XSiO_{2}{\cdot}YNaO_{2}{\cdot}ZGeO_{2}$계의 화합물은 $GeO_{2}$의 함량이 증가할수록 원적외선 방사율과 방사에너지가 점차적으로 증가하였다. 원적외선 방사율과 방사에너지는 $XSiO_{2}{\cdot}YGeO_{2}$계 화합물의 경우가 $XSiO_{2}{\cdot}YNaO_{2}{\cdot}ZGeO_{2}$계 화합물보다 높게 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제50권2호
• /
• pp.104-112
• /
• 2022

Indoor air quality is a very important environmental factor in modern society. However, air pollutants generated from various interior construction materials significantly affect the human body, including formaldehyde (HCHO) and volatile organic compounds that threaten public health by deteriorating indoor air quality. Effective in removing these harmful substances are porous materials, such as woodceramics. In this study, charcoal, a porous material, was added to rice husk, an agricultural by-product, and sawdust generated during the sawing process to prepare boards and ceramics at different mixing ratios, and the HCHO deodorization performance and far-infrared emission characteristics were measured. As the mixing ratio of charcoal increased, the deodorization rate of the boards and ceramics tended to increase. Overall, the deodorization rate was measured to be 80% to 90%, indicating that the boards and ceramics prepared with charcoal are suitable to be used for the purpose of deodorization. The effect of the material mixing ratio on far-infrared emissivity and emission power was insignificant.

• 한국세라믹학회지
• /
• 제45권7호
• /
• pp.387-394
• /
• 2008

The Physical property changes of calcined clay by carburization were investigated studied. The carburization mechanism is the penetration of carbon which occurred during incomplete fuel combustion into crevice of clay structure. The experiments for elasticity and freeze-thaw resistance were conducted, and the results can be summarized as follows: Dynamic modulus of elasticity and also freeze-thaw resistance of calcined clay by carburization treatment increased more than 92% after testing 300 cycle, which was more improved than 88% of calcined clay. Therefore, it can decrease the possibility of winter-sowing, which is one the weakness of calcined clay. It is on the basis of the fact that the porosity of calcined clay by carburization treatment is about 12%, which indicates smaller pore spaces comparing with the 14% of porosity of calcined clay and those values were calculated by apparent porosity show and also supported by SEM images. Infrared emissivity of calcined clay by carburization treatment and calcined clay were respectively 0.92 and 0.9l at $80^{\circ}C$. However, those values were 0.91 and 0.88 at $200^{\circ}C$, which means infrared emissivity of calcined clay by carburization treatment shows 3.6% higher than the calcined clay. Moreover, within the wavelength range from 3 to $7\;{\mu}m$, while the calcined clay had low infrared emissivity, the calcined clay by carburization treatment had increased infrared emissivity. It is inferred that it was affected by carbon element that has high infrared absorptivity within this wavelength range.

• 복식문화연구
• /
• 제14권2호
• /
• pp.260-270
• /
• 2006

In this research, the curly dock was used in the process of dyeing for fabrics of the inner wear & the patient wear. Since the curly dock has a pharmacological effect on dermatosis, this study focused on the variety of color and functions of the inner wear fabrics & patient wear fabrics to make the best use of the pharmacological effect of curly dock. With regards to giving a variety of colors and functions in the inner wear, patient wear fabrics, the curly dock dye was used in each treatment conditions on the cotton & silk fabrics. After dyeing, the dyeability, color change, light fastness, washing fastness, perspiration fastness, antibiosis, far infrared emissivity and emission power were evaluated. The evaluation results are as follows; The dyeablity increased from repeated dyeing and, by using the mordant, variety of colors such as skin, mustard, greyish-brown and dark earth colors were conformed to the naked eye. Fe mordant was better than Al on the lightfastness and the washing fastness. The repeated dyeing was found out to have less effect on neither lightfastness nor washing fastness. Both silk and cotton fabrics were graded $3{\sim}4$, since their degree of degradation appeared to be the same in alkali perspiration and acidic perspiration. In the case of silk fabrics mordanted by Al, the rate of declining in both Staphylococcus aureus ATCC 6538 and Klebsiella pneumonia ATCC 4352 were 99.9%. In addition, the antibiosis was enhanced when the mordant was used. The far infrared was 86.6% of emissivity, $3.34{\times}10^2\;W/m^2{\cdot}{\mu}m$ emission power.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권3호
• /
• pp.82-88
• /
• 2013

본 연구에서는 원적외선의 방출을 증진시켜 쾌적한 실내 환경을 조성시키며 아울러 비중이 높은 재료를 사용하여 층간소음을 저감시키기 위한 방안으로서 건축용 친환경 바닥 마감재에 자철석 잔골재를 사용하는 모르터의 기초물성 연구를 수행하였다. 실험에 사용된 모르터의 배합은 자철석 잔골재를 자연사로 0, 20, 40, 60, 100% 치환하였다. 먼저 원적외선 방출성능으로서 방사율과 방사에너지를 측정하여 KICM의 기준을 훨씬 상회하는 결과를 얻었다. 단위용적질량 압축강도 실험결과 치환율이 증가함에 따라 선형적으로 증가하는 결과를 얻었다. 그러나 건조수축 시험결과 자철석 잔골재의 치환율이 증가함에 따라 건조수축 변화율이 기준 시험체 대비 급격하게 증가하는 것으로 나타나 향후 이를 해결하기 위한 방안이 강구되어야 함을 알 수 있었다.

• 한국대기환경학회지
• /
• 제12권2호
• /
• pp.131-139
• /
• 1996

The developent of ceramic combustor is being increased beca- use of the excellent physical properties of ceramic material, that is, high-resistant strength, high emissivity power and high corrosin-resistance. Ceramic combustor has been interested in the application of ultra-lean combustion for low NO$_{x}$ emission and gaseuos waste incineration with good combustion. This experimental study was conducted to investigate the combustion and emission characteristics of wall recess type ceramic combustor with equivalence ratio, mixture flow velocity and wall recess depth as parameters. The results in this study are as follows: 1. Wall recess played a important role to extend flame stability region. 2. The peak temperature of gas was peoportional to equivalence ratio, mixture flow velocity and wall recess depth. 3. The static pressure of mixing chamber and inlet temperature depended on the position of flame zone. 4. NO reduction was achieved by lean mixture without lower combustibility.y.

• 한국의류학회지
• /
• 제22권4호
• /
• pp.515-524
• /
• 1998

The purpose of this study was to evaluate the thermal properties of ceramics coated nylon fabrics by determining far infra-red emissive properties, heat storage/release and thermal insulation. Far IR emissivity and emissive power were measured for 7~ 140n at 50'C . Three types of ceramics such as cordierite with $\alpha$-alumina, a-alumina with titanium oxide and a-alumina were chosen as specimens. Cordierite with $\alpha$-alumina was chosen to treat on the fabrics due to the good emissive properties on the fabrics. Add-ons and contents of ceramics were analyzed for ceramics and/or polyurethane coated fabrics. For the physical properties, thickness and air permeability were measured. Results showed a difference in the emissive property between ceramics themselves and ceramics coated fabrics. In the ambient temperature, there was no diffenence in emissivity among the different ceramics contents. Thermography showed that when the fabric was heated with the light, surface mean temperatures of fabrics were increased as the contents of ceramics increased, and the heat storage property was confirmed. In case of same thickness and air permeability, the thermal insulation value increased as the contents of ceramics increased because of increasing heat storage and Far IR reflectivity. So there were absorption and heat storage of ceramics for Far IR from human and reflection to human between ceramics coated fabrics and human.

• 감성과학
• /
• 제18권1호
• /
• pp.49-58
• /
• 2015

본 연구는 감성의류용 탄화지르코늄 함유 축열 니트의 원적외선 특성을 연구하였다. 탄화지르코늄 함유 축열 PET 원사가 이성분 방사법에 의해 방사되었다. 이 원사의 core부에는 고점도 PET와 탄화지르코늄을 혼합한 용액을, sheath부에는 저점도 PET 용액을 사용하여 콘쥬게이트 방사를 실시하였다. 이들 방사된 원사의 원소분석과 원적외선 특성 분석이 EDS와 FT-IR 계측기기에 의해 분석되었으며 두 가지 조직의 니트 소재를 편직하여 이들의 열적특성을 분석하였다. EDS 분석에서 Zr 피크를 확인하였으며 원사내에 Zr 원소가 19.29% 함유되어 있음을 확인하였다. 또한 원적외선 분석에서 $5{\sim}20{\mu}m$ 파장 영역에서 원적외선 방사에너지가 $3.65{\times}10^2W/m^2$, 방사율이 0.906 임을 확인하였다. KES-F7 측정기 분석에서 ZrC 함유 편성물의 Qmax 값이 일반 PET 편성물의 값보다 낮은 값을 보였고 보온율 값은 ZrC 함유 편성물이 일반 PET보다 더 높은 값을 보이므로서 ZrC의 축열성을 확인하였다. 열전도도는 Zr의 높은 열전도도 때문에 일반 PET 편물보다 더 높은 값을 보였다. ZrC의 함유가 편물의 촉감에 미치는 영향을 없었으며 편성 조직이 더 큰 영향을 주는 것을 확인하였다.

• 펄프종이기술
• /
• 제40권5호
• /
• pp.47-52
• /
• 2008

The far-infrared ray (FIR) has been applied to various fields such as medical therapy, kitchen utensils, bath supplies, and so on. The FIR-emitting agent was used to make functional paperboards to have freshness-maintaining ability. The FIR-emitting agent was diluted with different concentrations at 0.5% starch solution, and the FIR-emitting solutions were coated on paperboards, i.e., liner. The more the concentration of the FIR radiating agent increased at 0.5% cationic starch solution, the higher FIR emissivity and emission power of paperboards increased. The corrugated boxes made of paperboards coated by the FIR-radiating agents at over 5% dilution concentration endowed mandarin oranges in the boxes with greater antimicrobial activity than those in boxes made of paperboards coated by the agent at below 5% concentration. In addition, it was ascertained that treatment of the FIR agents rarely affected strength properties of paperboards.

• 폴리머
• /
• 제37권1호
• /
• pp.86-93
• /
• 2013

본 연구는 폴리프로필렌 수지에 불소화된 일라이트를 함량별로 첨가하여 제조한 일라이트/폴리프로필렌(PP) 부직포의 열적 특성, 항균성, 원적외선 방사율을 고찰하고자 하였다. 불소화 일라이트 첨가 폴리프로필렌 섬유의 열적 특성은 열중량 분석을 사용하여 조사하였다. 그 항균 특성은 황색포도상구균과 폐렴간균의 균주 실험으로, 원적외선 방사율은 퓨리에 변환 적외분광법을 사용하여 알아보았다. 그 실험결과, 일라이트/PP 부직포 섬유의 열적 특성 및 항균성, 원적외선 방사율은 불소화 일라이트의 함량이 증가할수록 증가하였고, 특히 불소화 일라이트 5 wt% 함유 PP 부직포 섬유의 경우가 일라이트를 함유하지 않은 PP 부직포에 비해 각각 10.3, 41.2 및 9.8%로 크게 증가하였다. 이는 일라이트의 불소화로 인하여 고분자 사슬 분자 사이의 계면결합력의 향상 때문이라 판단된다.