• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.3
• /
• pp.212-217
• /
• 1996

Investgated in relation to Methane emission on dry seeded rice culture was flooding and intermittent irrigation and application time of rice straw in clayey soil. Negative peaks of the methane emission before 3 leaves stage which were never seen in the transplanting cultivation was found and the highest peak was come out at the heading stage. Total amount of emitted methane was lower about 40% than that of the transplanted. Methane emission decreased about 19% by intermittent irrigation. Compost and NPK application reduced methane about 70% and 80% in comparisin with rice straw. Rice straw application one month before sowing reduced methane emission than the application just before sowing.

• Journal of Climate Change Research
• /
• v.6 no.4
• /
• pp.257-265
• /
• 2015

For estimating a net removal of carbon dioxides from a forest carbon offset project, it is necessary to consider secondary emissions occurred from the use of machineries or vehicles. According to the forest carbon standard in Korea, a default rate (5%) could be applied for estimating secondary emissions of small projects, which provide annual net removals less than or equal to $600tCO_2$, while secondary emissions should be estimated for larger projects with field survey. In this study, we intended to develop a methodology for estimating the secondary emission of a forest carbon project. For this purpose, we analyzed the working process and the carbon emissions of the forest management activities for major tree species in Korea. Based on the developed methodology, we estimated the secondary carbon emission of a reforestation project. The result showed that the secondary carbon emission of a reforestation project was estimated between 0.42% and 1.19 % compared to net removals, that is to say that the current default rate in the forest carbon standard could give an overestimated secondary emission.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.107-110
• /
• 2013

Recently, Korea parliament legislated the Low Carbon Green Growth Act (April, 2012) and approved a bill (May, 2012) to start carbon emission trading system in 2015. It means that for the first time, government would regulate the amounts of carbon emission in private entities, and private entities should attain predefined emission reduction goals by implementing clean development mechanism (CDM) project or buy the Certified Emission Reductions (CERs) from the trading market to avoid penalty. Under these circumstances, it is not easy for them to determine when or how to implement the CDM project because the governmental energy policies about the level of governmental subsidies, periods for free emission allocation, etc. are still under discussion and the future price of the CERs is quite uncertain. Thus, this study presents a real-option based model to assess the financial viability of the CDM project which switches bunker-C oil to liquefied natural gas (LNG). The proposed model is expected to assist private entities in establishing the investment strategy for CDM project under uncertain government energy policies.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.2
• /
• pp.78-86
• /
• 2013

The researches for reduce $CO_2$ are going along animatedly in hole industry area. In construction area, the researches to minimize $CO_2$ emission are progressing variously. The researches to minimize $CO_2$ emission based on $CO_2$ emission. The method measuring $CO_2$ emission are using $CO_2$ emission coefficient on fuel consumption, LCA and an inter-industry relation table. Especially, the methods using the carbon emission coefficient based on fuel consumption are 3 types(Tier1~Tier3) of IPCC. Present, the most using method(Tier1) is using the fuel consumption and the carbon emission coefficient. But because this method do not effect each vehicle distance and driving environment, we can't calculate right $CO_2$ emission. Especially construction project's $CO_2$ emission could be different by project's characteristic. However, we can't apply these difference with present methods. So we need methodology calculating $CO_2$ emission by applying personal project's characteristic and these methodology's most important things is directly measuring $CO_2$ emission of construction equipment which use energy. The object of this study is to develop the $CO_2$ emission calculation methodology which occur in construction process, is to suggest ways to measure in real time $CO_2$ emission from construction equipment.

• Journal of Environmental Impact Assessment
• /
• v.9 no.4
• /
• pp.257-269
• /
• 2000

This study is to investigate the methodology and applicability on emission control by both MECHANICAL Model and Fugitive Dust Model (FDM) through the comparison of field measurement data and calculated data. Comparing to the method of AP-42 emission fector on the production of flying dust the MECHANICAL Model was proved to be more applicable to the calculation emission rate on the various dust emission conditions on a unpaved road. The seperate calculation on annual mean emission amount and a 24working hours amount was undertaken for the easy management of fugitive dust. Dust concentration predicted by FDM is similar with a measurement value.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.606-615
• /
• 2018

Over the past two decades, the options for solid waste management have been changing from land disposal to recycling, waste-to-energy, and incineration due to growing attention for resource and energy recovery. In addition, the reduction of greenhouse gas (GHG) emission has become an issue of concern in the waste sector because such gases often released into the atmosphere during the waste management processes (e.g., biodegradation in landfills and combustion by incineration) can contribute to climate change. In this study, the emission and reduction rates of GHGs by the municipal solid waste (MSW) management options in D city have been studied for the years 1996-2016. The emissions and reduction rates were calculated according to the Intergovernmental Panel on Climate Change guidelines and the EU Prognos method, respectively. A dramatic decrease in the waste landfilled was observed between 1996 and 2004, after which its amount has been relatively constant. Waste recycling and incineration have been increased over the decades, leading to a peak in the GHG emissions from landfills of approximately $63,323tCO_2\;eq/yr$ in 2005, while the lowest value of $35,962tCO_2\;eq/yr$ was observed in 2016. In 2016, the estimated emission rate of GHGs from incineration was $59,199tCO_2\;eq/yr$. The reduction rate by material recycling was the highest ($-164,487tCO_2\;eq/yr$) in 2016, followed by the rates by heat recovery with incineration ($-59,242tCO_2\;eq/yr$) and landfill gas recovery ($-23,922tCO_2\;eq/yr$). Moreover, the cumulative GHG reduction rate between 1996 and 2016 was $-3.46MtCO_2\;eq$, implying a very positive impact on future $CO_2$ reduction achieved by waste recycling as well as heat recovery of incineration and landfill gas recovery. This study clearly demonstrates that improved MSW management systems are positive for GHGs reduction and energy savings. These results could help the waste management decision-makers supporting the MSW recycling and energy recovery policies as well as the climate change mitigation efforts at local government level.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.2
• /
• pp.7-15
• /
• 2019

Purpose - The industrial structure upgrading can play an important role in promoting the carbon emission efficiency. Thus, this paper attempts to study the impact of industrial structure upgrading on carbon emission efficiency in order to reduce carbon emissions. Research design, data, and methodology - This paper selects panel data of 30 provinces and municipalities (autonomous regions) in China from 2001 to 2016, and divides them into three regions. The Moore index is used to measure the industrial structure upgrading, the non-radial SBM model based on undesired output is used to measure the slack variable to calculate the total factor carbon emission efficiency. Finally the impact of industrial structure upgrading on the carbon emission efficiency are analyzed. Results - It is found that the Moore index and the carbon emission efficiency in the eastern region is the highest in the three regions. Conclusions - The influence of various influencing factors on carbon emission efficiency is different between regions. The Moore index has a positive effect on the carbon emission efficiency in the eastern region, and has a negative influence coefficient on the central region. The effect on the western region is not obvious.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.3
• /
• pp.301-308
• /
• 2011

International Maritime Organization (IMO) proposed the Energy Efficiency Operation Indicator (EEOI) in 2005 and the Energy Efficiency Design Index (EEDI) in 2008 so as to address emission concern and regulation. Likewise, Ship Energy Efficiency Management Plan (SEEMP) and Greenhouse Gas (GHG) monitoring and management are also becoming an issue lately. This paper introduces the energy efficiency design index (operation indicator) monitoring system (EDiMS) software can continuously monitor $CO_2$, $NO_x$, $SO_x$, and PM values emitted from ship. The accurate inventory of ships GHG can be obtained from base of emission result during the engine shop test trial and the actual monitoring of shaft power and ship speed. In addition, the ability to store all exhaust emission and engine operation data can be applied as the useful tool of the inventory work of air pollution and ship energy management plan for the mitigation or reduction of ship emissions.

• Journal of Climate Change Research
• /
• v.9 no.1
• /
• pp.81-90
• /
• 2018

"The Framework Act on Low-Carbon Green Growth" specifies the requirements for the development and verification of emission factors for establishing reliable national greenhouse gas statistics. The scope of the regulations covers the development and validation of energy, industrial processes, solvents and other product use, agriculture, land use, land use change and emission and absorption coefficients of the forestry and waste sector as defined in the 1996 IPCC Guideline and GPG 2000, The minerals sector to be covered in this study belongs to industrial processes. As a representative method for quantifying and evaluating GHG emission factors, there are emission grade quality grading and DARS (Data Rating Rating System) in the 'Procedures for Preparing Emission Factor Documents (1997)' reported by US-EPA. However, the above two methods are not specific and comprehensive, and lack the details for accurate emission factor verification. Therefore, there is a need for a method for verifying and quantifying certified greenhouse gas emission factors that reflects characteristics of each industry sector in Korea and accord with IPCC G/L and GHG target management. In this study, we conducted a weighted study on quantitative and evaluation lists of emission factor using questionnaires to develop a more accurate methodology for quantifying national greenhouse gas emission factors in the mineral sector. Quantification and evaluation of emission factor are classified into essential verification and quality evaluation. The essential verifications are : administrative compatibility, method of determining emission factors, emission characteristics, sampling methods and analysis methods, representativeness of data. The quality evaluations consisted of the quality control of the data, the accuracy of the measurement and analysis, the level of uncertainty, not directly affect the emission factor, but consisted of factors that determine data quality.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.4
• /
• pp.366-368
• /
• 2013

BACKGROUND: Composting is the most frequently used waste management process for animal manure in Korea's livestock industry. In the composting process, a large amount of nitrogen (N) is volatilized to the atmosphere as amonia ($NH_3$). However, quantitative information of $NH_3$ emission from composting of liquid manure is required to obtain emission factors for management of livestock manure in Korea. METHODS AND RESULTS: To evaluate the $NH_3$ emission from composting of liquid manure affected by aeration, we conducted composting of liquid pig manure with three forced aeration systems. The aeration conditions were continuous (A60), cycle of 30 min aeration and 30 min pause (A30S30) and without aeration(A0). All treatments were aerated 12 hour per day with these aeration systems. The total ratio of $NH_3$ volatilization loss to total N content in liquid manure throughout composting period was estimated to 19.9% for A0 treatment, 25.9% for A30S30 treatment and 36.3% for A60 treatment. The A30S30 and A60 aeration systems increased $NH_3$ volatilization by 30.2 and 82.3% compared with systems without forced aeration. CONCLUSION(S): Ammonia emission during liquid pig manure composting was highly affected by forced aeration. The development of liquid pig manure composting systems with forced aeration would be considered both reducing ammonia emission and efficiency of composting.