• 전기학회논문지
• /
• 제57권12호
• /
• pp.2199-2201
• /
• 2008

Sulfur hexafluoride($SF_6$) is a gaseous dielectric used in high voltage electrical equipment such as an insultor or arc quenching medium in the transmission and distribution of electricity. however, $SF_6$ is one of the greenhouse gases(GHG) with a global warming potential that is 23,900 times greater than that of carbon dioxide($CO_2$). for this reason, $SF_6$ emissions in electric equipment shall be controlled to reduce GHG and improve cost-effective use of $SF_6$ for economical benefits. Until recently there has not been any investigation on $SF_6$ emission characteristics and inventory in Korea. To understand emission characteristics during the use-phase, the scope of this study was limited to the following closed pressure system equipment from 10 substations in Korea. This study highlights (1) the investigation of sampling/analysis methodology for $SF_6$ emissions in high voltage equipment, (2) the estimation of $SF_6$ emissions in the use-phase, and (3) the comparison between the emission ratio and the mass-balance applied to inventory study. According to this study, the majority of emissions were related to electric equipment nameplates and the rest of the emissions were related to the handling of $SF_6$ during operations. from this result, emission ratios estimated from this study were similar; GIS was 14% and GCB was 13%, as maintenance process conditions were the same as manual process conditions for both equipment.

• 한국대기환경학회지
• /
• 제20권3호
• /
• pp.281-290
• /
• 2004

The main purpose of this study was to characterize the air pollutants emission factors in electric power plant (EPP) using fossil fuels. The electric power plant is a major air pollution source, thus knowing the emission characteristics of electric power plant is very important to develop a control strategy. The major air pollutants of concern from EPP slacks are particulate matter (PM), sulfur oxides (SOx), nitrogen oxides (NOx), carbon monoxide (CO) and heavy metals. Throughout the study, the following results are estimated - PM : 8.671E-05 ∼ 8.724E+01 PM emission (kg) per fuel burned (ton) - SOx : 4.149E-04∼7.877E+01 SOx emission (kg) per fuel burned (ton) - NOx 1.578E-02∼9.857E+00 NOx emission (kg) per fuel burned (ton) - CO : 3.800E-04∼1.291E+00 CO emission (kg) per fuel burned (ton) - Hg : 1.220E+01∼3.108E+02 Hg emission (mg) per fuel burned(ton) From the statistical analysis by Wilcoxon signed ranks test between the emission factors of ours and U.S. EPA's, we can yielded that : p 〉0.05.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.165-166
• /
• 2003

국내에서의 PAHs 연구결과 들은 아직도 측정·분석방법의 평가 등에 관한 수준에 머무르고 있으며, 전국적인 PAHs의 배출원 조사와 배출량 추정 등 체계적인 배출상태조사(emission inventory)와 배출특성 등에 관한 조사·연구 사례는 전무한 실정이다. 더욱이 오래 전부터 이 분야에 많은 관심을 가진 나라에서도 이 분야에 대한 연구가 입자상 물질에 흡착되어 있는 PAHs에 국한되고 있는 실정이다. (중략)

• 한국대기환경학회지
• /
• 제30권6호
• /
• pp.555-568
• /
• 2014

The construction equipment is one of the major sources for hazardous air pollutants in Korea, and the its management has been of great concern recently. The objective of this study was to estimate each contribution of emission of construction equipments according to their production year, electric power consumption and type. To achieve this goal, we developed pollutant emission factors for the machineries manufactured after 2009, which are excluded from the present framework of Korean air pollutants inventory, CAPSS. More than 800 data obtained from emission investigations were utilized for the estimation. Compared with the previous estimation, the scheme used this study was modified to incorporate new emission factors as well as to include the corresponding activity data. Such improvement allow us to gain more detailed emission informations which are better characterized by specifications of construction equipments. The total amount of pollutants emitted from construction equipments in 2011 were estimated as 126.8, 7.0, 58.3, and 17.0 kton for $NO_x$, PM, CO, and VOC, respectively. The estimation results indicate that the increase in the emission of equipments is significantly related to their age and power consumption. The emissions of the older ones manufactured from 1992~1996 were estimated to be the contribution ranged from 23.7% to 26.8%, whereas the newer ones (2009~2011) showed the attributions of 11.3~21.5%. In addition, the results show that the emission of each equipment was increased with the increase in the electric power consumption of engine, probably due to their average output power. Among the nine types of machinery compared, excavators and forklifts were investigated to contribute relatively higher emissions in the level of 39.8~44.0% and 32.0~34.2%, respectively.

• 환경생물
• /
• 제38권1호
• /
• pp.71-81
• /
• 2020

국내 발생 암모니아 중 가축분뇨의 기여율이 높은 것은 자명한 사실이다. 암모니아 배출량 산정 과정의 정확도와 신뢰도 향상을 위해서는, 가축분뇨 발생량의 정확한 집계, 가축분뇨의 퇴비화 및 액비화 과정에서 단계별 암모니아 전환량과 발생량 산출, 퇴액비의 저장 및 운송과정에서의 암모니아 발생량 산정 그리고 토양 살포 과정과 방법에 따른 암모니아 발생량 비교 연구가 반드시 수행되어야 할 것이다. 미국과 유럽과 비교해 볼 때, 특히 국내 배출계수가 상대적으로 매우 획일적이고 시공간적으로 세분화되지 못해 국내 실정을 충분히 반영하지 못하고 있다. 암모니아 배출계수 산정의 정확도와 전문성을 향상 시킬 수 있는 방안으로, 퇴액비의 특성, 토양의 특성 그리고 기후 특성의 복합적인 고려가 가능한 챔버시스템을 활용할 수 있을 것이다. 국내외 암모니아 배출과 관련한 자료의 검토와 비교를 통해 현재 국내 시스템의 부족한 점과 나아가야할 방향을 확인할 수 있었으며, 암모니아 배출유량 산정이 가능한 챔버 시스템을 제언하였다. 향후 누락배출원의 신규 배출계수 산정과 같은 실질적인 정책과의 연계를 위해서는 실내의 챔버 시스템에서 더 나아가 현장에서의 mesocosom 시스템의 방법론 구축 또한 필요할 것으로 판단된다.

• 한국환경과학회지
• /
• 제20권5호
• /
• pp.599-610
• /
• 2011

Emission of air pollutants such as nitrogen oxides ($NO_x$), hydrocarbons (HC), $SO_2$, and particulate matter (PM) and $CO_2$ from ship during 2009 in Busan port was estimated based on activity-based method. The significant fraction (> 50%) of ship emission resulted from container and general cargo ships. Emission at port operation mode was the most dominant compared to at sea and maneuvering modes. Emission at North port was the largest source of air pollutants among ports. The magnitudes of air pollutants $NO_x$, $SO_2$, HC, $CO_2$, and PM in Busan port were $8.7{\times}10^3$, $8.23{\times}10^3$, $0.35{\times}10^3$, $4.86{\times}10^6$, and $0.67{\times}10^3$ ton/yr, respectively. The ratio of $NO_x$ to VOC is about 25. Our ship emission estimate is 2 times higher than that in CAPSS emission inventory.

• 한국대기환경학회지
• /
• 제24권5호
• /
• pp.574-583
• /
• 2008

The results of HAPs emission data using TRI (Toxic Release Inventory), SODAM (Source Data Management system) were investigated and the emissions of 7 heavy metals from their sources and emission processes were also analyzed. Questionnaire for source data analysis as well as the stack sampling were carried out for 17 factories among 6 selected industrial types. The annual amount of emissions was estimated based on the measured concentration and flow rates. All sources were operated with high efficiency control devices and the concentration levels of all heavy metals were shown to be below 0.1 to of regulation standard. The highest emission source of heavy metals was steel manufacturing industry with the annual emission of 342.9 kg/yr and followed by hazardous waste incinerator, paint manufacturing, nonferrous metal manufacturing, rolling & press goods manufacturing and storage battery manufacturing. In the case of Hg, the emissions were quite significant from electric acros of steel manufacturing industry, although the concentration level was below the emission standard, showing the necessity of specific care for its management.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.515-520
• /
• 2011

The Climate Change has been emerged as one of the most important social and economic issues and is affecting our daily life. The Post-Kyoto Protocol aims to reduce GHG(Greenhouse Gas) emission and mitigate climate change. Under this protocol, developed countries which are classified as Annex I implements programmes and strategies confronting against the climate change. South Korea has set voluntary GHG reduction goal of 30% reduction compared to BAU(Business As Usual) in 2020 and prepares National GHG inventory system and Negotiated Agreements(NA) with industries. It will affect seriously to industry and transport sector and its obligation to reduce GHG emission will be strengthened gradually. Therefore, there will be large impact on industry structure. In Korea, various strategies against climate change are being prepared as researches of development of GHG emission reduction technologies and integrated GHG emission management system in transport sector. In this study, strategy on climate change in transport sector is proposed by being based on developed countries' respond to climate change in transport sector.

• 한국환경과학회지
• /
• 제22권9호
• /
• pp.1105-1113
• /
• 2013

This paper attempted to estimate the emissions of HFC-134a from scrap truck as a result of measuring the residual quantities of HFC-134a in air conditioner of scrap truck. We measured the residual amounts in the scrap truck of 138 by applying commercial recover for refrigerants. The average residual rate(disposal-phase emission factor) is reported to be $44.3{\pm}3.3%$ within a confidence interval of 95%. Recent year model trucks exhibit the higher residual rates. Little variation, however, is observed in regard to vehicle size. The HFC-134a emission quantity from scrap truck in 2011 is estimated to be 55,908 $tCO_2$-eq that demonstrates 21.4% increase to compare with that in 2007. As the numbers of truck have increased dramatically during the last two decades, the emissions of HFC-134a from scrap truck would increase sharply in the next coming years. HFC-134a is a very high GWP greenhouse gas. therefore have to reduce the emissions from the scrap truck and need to find ways to recycle. The chemical compositions of refrigerants from scrap truck are quite similar to those of new refrigerants, suggesting that the refrigerants from scrap truck could be reused as refrigerant.

• 한국대기환경학회지
• /
• 제13권2호
• /
• pp.123-135
• /
• 1997

An air pollutant emission inventory system for the input preparations of photochemical dispersion model was developed. Using the system, anthropogenic emissions as well as biogenic emissions in the Seoul metropolitan area were calculated. Anthropogenic emission by fuel combustion using regional cosumption data, and the laundries and so forth was estimated. The biogenic emission was estimated based upon meteorological data and the distribution of land use type in the study area. The anthropogenic emission of pollutants was highest in Seoul, and the second highest in Inchon. TSP and $SO_2$ were found large quantities during the winter due to increased consumption of heating oil. NOx and THC were emitted without seasonal variation. Among biogenic emissions, PAR was very common while NO was the least common. PAR, OLE, and ALD2 were emitted in large volumes in coniferous forest areas, while ISOP was emitted in deciduous forest areas. Generally, most biogenic emissions increased during daytime, and peaked between oen and two o'clock. Because of strong solar radiation, emission during the summer was high. Biogenic NO emissions were found to be lower compared to anthropogenic emissons, and other VOC was indicated relatively high. In the study area, among biogenic emissions PAR was found to be 3 times, OLE 8 times,and ALD2 12 times more common than among anthropogenic emissions.